Help to build driver for EGPL-T101 M.2 based 10Gbit NIC.

[cvondra]

I was wondering if you could help me. I have a 1520+ (geminilake) and I purchased a EGPL-T101. On the Innodisk website is the linux driver source (at the bottom of the page). I am not very well versed in linux and was wondering if you could help me build this driver. Thanks for any help you may provide!

https://www.innodisk.com/en/products/embedded-peripheral/communication/egpl-t101

Chad

[wjz304]

Hi, bro https://raw.githubusercontent.com/pocopico/rp-ext/main/atlantic/rpext-index.json Have you tried ?

[cvondra]

How would I install that?

On Thu, Dec 1, 2022 at 8:24 PM Ing @.***> wrote:

Hi, bro

https://raw.githubusercontent.com/pocopico/rp-ext/main/atlantic/rpext-index.json Have you tried ?

— Reply to this email directly, view it on GitHub https://github.com/jim3ma/synology-igc/issues/9#issuecomment-1334683012, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFYYC4TNJDLXLKZUVCDCPZDWLFMVPANCNFSM6AAAAAASRDMHQM . You are receiving this because you authored the thread.Message ID: @.***>

[wjz304]

https://raw.githubusercontent.com/pocopico/rp-ext/master/atlantic/releases/atlantic-4.4.180plus-geminilake.tgz
From this link, you can get the driver file of ".ko". Refer to the loading method of igc in the README.md for installation.

[cvondra]

SFP+ in switch is a 10Gbit. The Innodisk M.2 is showing a 5Gbit connection in DSM. The SFP+ is showing a 10Gbit connection in Ubiquiti console. Is that driver for a 5Gbit card?

[wjz304]

I'm sorry, I don't have this equipment, so I don't know the details, It may be a compatibility problem caused by an older driver (I'm just guessing). Because pocopico is maintaining it, and there are many people using the pocopico library, if pocopico fix it, will help more people, so I think you can give him a feedback.

[wjz304]

I am sorry for my broken English.

[cvondra]

Crazy enough swapped cable and everything is running at 10Gbit now. Thanks for your help!

[wjz304]

happy for you.