Open jona86 opened 2 months ago
Refer to this article for repair https://jjmgit.my.to/nas/2021/03/01/rtd1619-unbrick.en.html . Please note that the z9x_flash_rescue.zip provided in the article may only be suitable for z9x and may not be used on z2000 pro. If it doesn't work, then I can't help it. I am not an official staff of zidoo, and I don't even have z9x or z2000 pro.
Hello, I wanted to ask you for help, I have left my z2000 pro bricked, I have tried as on the zidoo website, changing the flas file for img.install, etc. but it stays up for hours, I have discovered that the USB ports do not have voltage but the rj45 Yes, I have also verified that I ping zidoo's IP remotely and it responds, but the screen is black, I have read that it can be recovered by the uart method, but I see that your explanation is for the z9x, the same procedure would work for the z2000 pro? If you can please help me, I appreciate it very much, forgive my English, I use the translator.