jkougoulos / lowpower-i2c-sensor

Another ATMega328PB based wireless sensor, designed for low power consumption
0 stars 0 forks source link

Long term test 2 (TSTKO-0001) #22

Open jkougoulos opened 6 years ago

jkougoulos commented 6 years ago

Due to DHT22-0003 does not have antenna any more, TSTKO-0001, full power with a new VARTA 2032 has been deployed in external area 18.07.2018. Additional changes, MCU sleep is activated when radio send fails to not consume power while waiting for watchdog reset

jkougoulos commented 5 years ago

Last measurement: 2018-10-08 13:09:52 /dev/ttyUSB3 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8f80/C00:29c2/T01:8e/H01:24d/BAT:OK/RS0:-56')

need to check status.

Also logs show the following:

2018-10-08 11:51:22 /dev/ttyUSB3 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8d40/C00:299b/T01:78/H01:2cf/BAT:13/RS0:-55') 2018-09-23 13:21:54 /dev/ttyUSB3 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8cc0/C00:1124/T01:90/H01:34b/BAT:13/RS0:-62') 2018-09-23 13:01:46 /dev/ttyUSB3 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8dc0/C00:111a/T01:97/H01:32f/BAT:13/RS0:-60') 2018-09-16 08:16:09 /dev/ttyUSB3 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8dc0/C00:1b5f/T01:7a/H01:2e6/BAT:13/RS0:-57')

jkougoulos commented 5 years ago

New VARTA was installed, let's repeat the test. Possible issues could be the strange battery holder 10.10.2018

jkougoulos commented 5 years ago

lasted until 04.11.2018 ... this happened: 2018-11-04 02:25:40 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8ec0/C00:4541/T01:22/H01:33f/BAT:OK/RS0:-73') 2018-11-04 02:27:41 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8ec0/C00:4542/T01:22/H01:33b/BAT:OK/RS0:-72') 2018-11-04 02:29:41 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8f00/C00:4543/T01:23/H01:33e/BAT:OK/RS0:-75') 2018-11-04 02:29:43 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:114840/C00:1/T01:23/H01:33f/BAT:OK/RS0:-76') 2018-11-04 02:31:42 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8d80/C00:2/T01:23/H01:33c/BAT:OK/RS0:-76')

followed by this:

2018-11-04 11:31:12 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8d80/C00:10e/T01:62/H01:328/BAT:OK/RS0:-72') 2018-11-04 11:33:13 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8c80/C00:10f/T01:63/H01:327/BAT:OK/RS0:-74') 2018-11-04 11:37:14 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8b80/C00:111/T01:63/H01:328/BAT:OK/RS0:-74') 2018-11-04 11:39:15 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8c80/C00:112/T01:64/H01:327/BAT:OK/RS0:-73') 2018-11-04 11:41:16 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:8dc0/C00:113/T01:64/H01:322/BAT:OK/RS0:-81') 2018-11-05 05:31:26 /dev/ttyUSB5 Received Frame is:bytearray(b'#SENSDATA#ID1:3e6/MS0:114840/R(\xdb%\xf8T\xaa\x96\x97\x92\x15\x96yP|\x8d\x866m\xc3\xbeo"\x94\xeb\x05\xf1/RS0:-106')

then stuck on rebooting every 10-12 secs, possibly IR was too large while transmitting, causing reset

Need to check also with different batttery holder, different hw and different battery. Not really sure if the root cause is one of those, or the weather conditions. TSTKO-002 runs many months without issues so far, but inside, different battery, different battery holder, different hw obviously

jkougoulos commented 2 years ago

do not remember a lot. Indoor test lasted ~3 years