search

jlama / powertagd

15 stars 7 forks source link

Decryption Error? #8

Closed Sany-IO closed 1 year ago

Sany-IO commented 1 year ago

Hello,

I have some Schneider Electric PowerTags and i become this message:

[code] [INFO] tty: opening '/dev/ttyACM0' at 115200 bauds [INFO] ash: connected to NCP [INFO] ezsp: EZSPv9, stack type 2 (mesh), version 7.1.3.0 [INFO] ezsp: xNCP manufacturer: 0xbaba, version: 0x1000 [INFO] ezsp: registering gateway endpoint [INFO] ezsp: registering Green Power endpoint [INFO] ezsp: initializing network... [INFO] ezsp: stack state changed to EMBER_NETWORK_UP [INFO] ezsp: network joined as coordinator node on channel 24 (PAN: 0x690e, TX power: 0 dBm) [WARN] gp: could not decrypt or validate GPF [WARN] gp: could not decrypt or validate GPF

[/code]

jlama commented 1 year ago

This happens if a PowerTag was paired with another device. You need to re-pair the PowerTags with the dongle. To un-pair a PowerTag: power-off any coordinator/proxy and wait 5-10min for the PowerTag to blink red fast, then power-off the PowerTag.

Sany-IO commented 1 year ago

Thank you, the trick is wait 5-10 Minutes! ;)