After Lights added - no synch between Ligths Power and Lumens (in Node section)

jlampel / extra_lights

Adds physically based lights to Blender's Add menu

Other

249 stars 27 forks source link

After Lights added - no synch between Ligths Power and Lumens (in Node section) #27

Open RomuGit opened 2 years ago

RomuGit commented 2 years ago

When I add a lights, I have a menu that will disappear after the lights is added. on this 'add menu', if I change the lumen or color value, I can see in the lights properties panel, the lights power in W changing. Once the lights installed, if I change in the node section the Lumen of color, there is no change of the Lights power in W...

So I have a doubt if my change of Lumen value for instance is correctly reflected...

Thanks for your help

jlampel commented 2 years ago

Hi! Sorry for just now seeing this. When Use Nodes is enabled, changing the value in the redo panel should not change the power in the properties panel - that should stay at 1 W and the color should be set to white. Only the node should be updated. If Use Nodes is not enabled, then the color and power will change in the properties panel. Is that different than what you are seeing? A screenshot would help if you have one.