Dock Mount Fixed hole spacing

jlas1 / Klicky-Probe

Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

GNU General Public License v3.0

1.26k stars 280 forks source link

Dock Mount Fixed hole spacing #186

Open ashinckley opened 1 year ago

ashinckley commented 1 year ago

I spent about 45 minutes scratching and nearly bending my 2020 extrusion trying to get some stubborn M5 roll nuts inside, only to discover the orientation I placed them in wouldn't allow clearance for the fixed mount. (The holes on the mount are too close together) I stubbornly forced it anyways, and cracked my mount in half.
After I calmed down, I edited the dock mount to allow an extra 2mm clearance between the holes. Feel free to use/distribute/update this version: Dock_Mount.zip

btoconnor commented 1 year ago

I just ran into this issue as well with the left oriented mount. It would be nice if the docs either explicitly stated that the M5 roll in nuts need to be oriented in a specific way, or the mount could be made wide enough to accommodate the M5 roll in nuts.