Old flowblade project cannot be opened

gubi80 commented 8 years ago

Hi,

due to a system crash I reinstalled flowblade. Issue: if I try to open an existing flowblade-project the process starts, the window reads "unpickling"... Currently the system tries for more then half an hour to open a project file of a 5 minutes video clip.

No error message, nothing. System is Linux Mint 17.3 Cinnamon. No extras.

Any help's appreciated.

Thx Gunnar

jliljebl commented 8 years ago

Please provide more information:

Which version of Flowblade you are using?
What is the terminal print out when this happens?

gubi80 commented 8 years ago

Hi,

version is Flowblade 1.6. Terminal output I can provide if you give me a hint what you want to have: syslog ? Logfile of flowblade (where do I find it?) ?

Thanks for your help ;- )

Am 24.03.2016 10:06 schrieb jliljebl:

Please provide more information:

Which version of Flowblade you are using?

What is the terminal print out when this happens?

You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub [1]

*

Links:

[1] https://github.com/jliljebl/flowblade/issues/223#issuecomment-200746974

jliljebl commented 8 years ago

1) Open program called "Terminal" 2) Write "flowblade" and hit return 3) Try to open the problematic file 4) Once this fails copy text from terminal (usually with Shitf + CTRL + C) and paste that text here.

One other question, which version of Flowblade you used previously?

Also could you attach the problematic .flb file here, since problem is in the unpickling phase, the media you have used in the project is not needed here.

gubi80 commented 8 years ago

Hi,

thanks for the clarification.

code: flowblade > /home/gunnar/flowblade_1.6.log.txt 2>&1

returned the logfile attached. Please find also the project file attached. The previous version was 1.4 I guess (90% sure).

best regards, Gunnar

N.B. I suspected it to be aproblem with the file name (more precisely the german character "ö"). So I renamed it once for testing but it didn't help.

Am 25.03.2016 um 00:15 schrieb jliljebl:

1) Open program called "Terminal" 2) Write "flowblade" and hit return 3) Try to open the problematic file 4) Once this fails copy text from terminal (usually with Shitf + CTRL + C) and paste that text here

One other question, which version of Flowblade you used previously?

Also could you attach the problematic .flb file here, since problem is in the unpickling phase, the media you have used in the project is not needed here.

— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/jliljebl/flowblade/issues/223#issuecomment-201068945

FLOWBLADE MOVIE EDITOR repository 1.6

Launch script dir: /usr/bin Running from installation... modules path: /usr/share/flowblade/Flowblade MLT found, version: 0.9.0 OS: Ubuntu 14.04.4 LTS Python 2.7.6 (default, Jun 22 2015, 17:58:13) [GCC 4.8.2] GTK+ version: 3.10.8 User dir: /home/gunnar/.flowblade/ Locale: de_DE Translations at /usr/share/locale were not found, using program root directory translations. Use OS locale language. Small height: False Small width: False

Detecting environment...

video_codecs:

a64multi
a64multi5
asv1
asv2
bmp
cljr
dnxhd
dpx
dvvideo
ffv1
ffvhuff
flashsv
flv
gif
h261
h263
h263p
huffyuv
jpegls
ljpeg
mjpeg
mpeg1video
mpeg2video
mpeg4
msmpeg4v2
msmpeg4
pam
pbm
pcx
pgm
pgmyuv
png
ppm
prores
qtrle
rawvideo
roqvideo
rv10
rv20
sgi
sunrast
svq1
targa
tiff
utvideo
v210
v410
wmv1
wmv2
xbm
xwd
zlib
zmbv
libopenjpeg
libschroedinger
libtheora
libvpx
libx264
libxvid ...

audio_codecs:
comfortnoise
aac
ac3
ac3_fixed
alac
eac3
flac
mp2
nellymoser
real_144
vorbis
wmav1
wmav2
pcm_alaw
pcm_f32be
pcm_f32le
pcm_f64be
pcm_f64le
pcm_mulaw
pcm_s8
pcm_s16be
pcm_s16le
pcm_s24be
pcm_s24daud
pcm_s24le
pcm_s32be
pcm_s32le
pcm_u8
pcm_u16be
pcm_u16le
pcm_u24be
pcm_u24le
pcm_u32be
pcm_u32le
roq_dpcm
adpcm_adx
g722
g726
adpcm_ima_qt
adpcm_ima_wav
adpcm_ms
adpcm_swf
adpcm_yamaha
libgsm
libgsm_ms
libmp3lame
libopus
libspeex
libvorbis ...

formats:
a64
ac3
adts
adx
aiff
amr
asf
ass
asf_stream
au
avi
avm2
cavsvideo
crc
daud
dirac
dnxhd
dts
dv
eac3
ffm
ffmetadata
filmstrip
flac
flv
framecrc
framemd5
g722
gif
gxf
h261
h263
h264
hls
ilbc
image2
image2pipe
ipod
ismv
ivf
latm
m4v
md5
matroska
matroska
mjpeg
mlp
mmf
mov
mp2
mp3
mp4
mpeg
vcd
mpeg1video
dvd
svcd
mpeg2video
vob
mpegts
mpjpeg
mxf
mxf_d10
null
nut
ogg
oma
alaw
mulaw
f64be
f64le
f32be
f32le
s32be
s32le
s24be
s24le
s16be
s16le
s8
u32be
u32le
u24be
u24le
u16be
u16le
u8
psp
rawvideo
rm
roq
rso
rtp
rtsp
sap
segment
smjpeg
smoothstreaming
sox
spdif
srt
swf
3g2
3gp
truehd
rcv
voc
wav
webm
yuv4mpegpipe
alsa
oss ... MLT detection succeeded, 112 formats, 59 video codecs and 49 audio codecs found. 282 MLT services found. Loading render profiles... Proxy encoding MPEG-4 Preset Ultrafast ...available Proxy encoding MPEG-2 Transport Stream ...available Loading filters... MLT service frei0r.alphagrad not found. MLT service frei0r.alphaspot not found. MLT service frei0r.alpha0ps not found. MLT service frei0r.select0r not found. MLT service frei0r.spillsupress not found. MLT service lumakey not found. MLT service frei0r.vignette not found. MLT service frei0r.emboss not found. MLT service frei0r.dither not found. MLT service frei0r.colorhalftone not found. MLT service frei0r.softglow not found. MLT service frei0r.IIRblur not found. MLT service frei0r.rgbnoise not found. MLT service lumaliftgaingamma not found. MLT service lift_gamma_gain not found. Brightness dropped, MLT version too low for this filter. MLT service rgblut not found. MLT service rgblut not found. MLT service frei0r.coloradj_RGB not found. MLT service frei0r.coloradj_RGB not found. MLT service frei0r.colgate not found. MLT service frei0r.posterize not found. MLT service frei0r.colortap not found. MLT service frei0rException in thread Thread-3: Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner self.run() File "/usr/share/flowblade/Flowblade/projectaction.py", line 100, in run project = persistance.load_project(self.filename) File "/usr/share/flowblade/Flowblade/persistance.py", line 324, in load_project project.name = project.name.encode("utf-8") UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 1: ordinal not in range(128)

jliljebl commented 8 years ago

The project file was not attached, probably because it seems that only some file types are supported: https://help.github.com/articles/file-attachments-on-issues-and-pull-requests/

Could you pack in .gz or .zip file and re-attach in a new comment?

gubi80 commented 8 years ago

Sure...

Am 25.03.2016 um 23:21 schrieb jliljebl:

The project file was not attached, probably because it seems that only some file types are supported: https://help.github.com/articles/file-attachments-on-issues-and-pull-requests/

Could you pack in .gz or .zip file and re-attach in a new comment?

|PNG (.png) GIF (.gif) JPEG (.jpg) Microsoft Word (.docx), Powerpoint (.pptx), and Excel (.xlsx) documents Text files (.txt) PDFs (.pdf) ZIP (.zip, .gz) |

— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/jliljebl/flowblade/issues/223#issuecomment-201549231

jliljebl commented 8 years ago

You can't answer with e-mail and add attachment to the e-mail. It will not become available to me either via e-mail or in the Issue page.

You must navigate to Github issue page using a web browser, log in, and then do as they instruct: "To attach a file to an issue or pull request conversation, drag and drop it into the comment box." I repeat, e-mailed attachments will be lost.

gubi80 commented 8 years ago

sorry, wasn't clear to me. I'll do...

Am 28.03.2016 um 19:07 schrieb jliljebl:

You can't answer with e-mail and add attachment to the /email/. It will not become available to me either via e-nail or in the Issue page.

You must navigate to Github issue page using a web browser, log in, and then do as they instruct: "To attach a file to an issue or pull request conversation, drag and drop it into the comment box." I repeat, e-mailed attachments will be lost.

— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/jliljebl/flowblade/issues/223#issuecomment-202489709

gubi80 commented 8 years ago

Kösssen_Tandem_Projekt.flb.zip

jliljebl commented 8 years ago

Ok, confirmed, will fix.

gubi80 commented 8 years ago

If you need more, just let me know. Sorry for the inconvenience.

jliljebl commented 8 years ago

Thanks, no need for further files, this demonstrates the problem perfectly.

gubi80 commented 8 years ago

Hi,

I just wondered if you could provide a 1.4 package meanwhile as I really need to work on that video. Problem is, I cannot find the older version somewhere...

Cheers, Gunnar

jliljebl commented 8 years ago

This link should work for 1.4 .deb, which should not have this bug:

https://www.dropbox.com/s/xe94cjwmf195de2/flowblade-1.4.0-1_all.deb?dl=0

jliljebl commented 8 years ago

Fixed in repository.

gubi80 commented 8 years ago

Hi. Thanks for the fix and sorry for that stupid question: how can I get / use the fixed version? Best regards, Gunnar

jliljebl commented 8 years ago

So "Installing Using Development Repository Version" here: https://github.com/jliljebl/flowblade/blob/master/flowblade-trunk/docs/INSTALLING.md

jliljebl / flowblade

Old flowblade project cannot be opened #223

Links:

FLOWBLADE MOVIE EDITOR repository 1.6

Detecting environment...

libxvid ...

libvorbis ...