Closed paragbatavia closed 4 months ago
They should appear in HA as switches but ONLY if they are tagged as features on the IntelliCenter panel (and appear under the features page on the IntelliCenter mobile app).
Sent from my iPhone
On Aug 15, 2021, at 9:49 AM, Parag Batavia @.***> wrote:
Currently - circuits that are configured as groups do not show up. This seems to be used for water features in a pool (i.e., waterfalls), where multiple pump states need to be set simultaneously.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.
Got it – it only comes up under groups, so I likely need to change something in the intellicenter panel.
Thanks much – and thanks for developing this!
From: jlvaillant @.> Sent: Sunday, August 15, 2021 1:28 PM To: jlvaillant/intellicenter @.> Cc: Parag Batavia @.>; Author @.> Subject: Re: [jlvaillant/intellicenter] Support for Groups (#26)
They should appear in HA as switches but ONLY if they are tagged as features on the IntelliCenter panel (and appear under the features page on the IntelliCenter mobile app).
Sent from my iPhone
On Aug 15, 2021, at 9:49 AM, Parag Batavia @. <mailto:@.> > wrote:
Currently - circuits that are configured as groups do not show up. This seems to be used for water features in a pool (i.e., waterfalls), where multiple pump states need to be set simultaneously.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/jlvaillant/intellicenter/issues/26#issuecomment-899085081 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AE52CYSSZT63YTCRKRDNUYLT472KRANCNFSM5CGK7BUA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email . https://github.com/notifications/beacon/AE52CYVEHLDBLE24ENWNDE3T472KRA5CNFSM5CGK7BUKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOGWLPGGI.gif
I just turned on my Intellicenter a week ago and after using the intellicenter app for a day, I installed this integration with HACS. My Circuit Group is "Water Slide". It turns my valve 1 (water feature) to on and then changes my valve 2 (Slide) to on. This Circuit Group shows up under "Features" in my intellicenter app, but when I check the Intellicenter Control Panel , there is no box to check "Features" as there are for individual circuits.
I would love to be able to see this Circuit Group in my Home Assistant, as the lights respond much quicker than the pentair app. I can also turn on my waterslide through Home Assistant as well by individually turning on the individual valves, but I would like the Circuit Group so I can make it easier for my wife's dashboard.
Currently - circuits that are configured as groups do not show up. This seems to be used for water features in a pool (i.e., waterfalls), where multiple pump states need to be set simultaneously.