Unable to compile on Unbutu

I assume I need to run the run_release.sh scrip to compile from sources. When I do that ...

libtoolize: putting auxiliary files in .'. libtoolize: linking file./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, m4'. libtoolize: linking filem4/libtool.m4' libtoolize: linking file m4/ltoptions.m4' libtoolize: linking filem4/ltsugar.m4' libtoolize: linking file m4/ltversion.m4' libtoolize: linking filem4/lt~obsolete.m4' configure.ac: error: no proper invocation of AM_INIT_AUTOMAKE was found. configure.ac: You should verify that configure.ac invokes AM_INIT_AUTOMAKE, configure.ac: that aclocal.m4 is present in the top-level directory, configure.ac: and that aclocal.m4 was recently regenerated (using aclocal) Makefile.am:85: error: DEBUG_SYMBOLS does not appear in AM_CONDITIONAL Makefile.am: installing './INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './README' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './ChangeLog' not found Makefile.am: installing './COPYING' using GNU General Public License v3 file Makefile.am: Consider adding the COPYING file to the version control system Makefile.am: for your code, to avoid questions about which license your project uses configure.ac:49: error: required file 'config.h.in' not found Makefile.am: installing './depcomp' /usr/local/share/automake-1.15/am/depend2.am: error: amfastdepCC does not appear in AM_CONDITIONAL /usr/local/share/automake-1.15/am/depend2.am: The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC' /usr/local/share/automake-1.15/am/depend2.am: to 'configure.ac' and run 'aclocal' and 'autoconf' again /usr/local/share/automake-1.15/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL /usr/local/share/automake-1.15/am/depend2.am: The usual way to define 'AMDEP' is to add one of the compiler tests /usr/local/share/automake-1.15/am/depend2.am: AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX, /usr/local/share/automake-1.15/am/depend2.am: AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC /usr/local/share/automake-1.15/am/depend2.am: to 'configure.ac' and run 'aclocal' and 'autoconf' again /usr/local/share/automake-1.15/am/depend2.am: error: amfastdepCXX does not appear in AM_CONDITIONAL /usr/local/share/automake-1.15/am/depend2.am: The usual way to define 'am__fastdepCXX' is to add 'AC_PROG_CXX' /usr/local/share/automake-1.15/am/depend2.am: to 'configure.ac' and run 'aclocal' and 'autoconf' again configure.ac:5: error: required file './compile' not found configure.ac:5: 'automake --add-missing' can install 'compile' configure.ac:5: error: required file './config.guess' not found configure.ac:5: 'automake --add-missing' can install 'config.guess' configure.ac:5: error: required file './config.sub' not found configure.ac:5: 'automake --add-missing' can install 'config.sub' configure.ac:6: error: required file './install-sh' not found configure.ac:6: 'automake --add-missing' can install 'install-sh' configure.ac:6: error: required file './missing' not found configure.ac:6: 'automake --add-missing' can install 'missing' untar-lzma ... failed! Error tar in /home/andy/Windspring/xdelta/xdelta3/build

I also run into this. Running ./generate_build_files.sh removes most of the errors but I can't get past untar-lzma ... failed.

I'm running:

 git clone git@github.com:jmacd/xdelta && cd xdelta/xdelta3 && sed -i 's/1.15/1.14/g' configure.ac && ./generate_build_files.sh && ./configure && ./run_release.sh

And I get:

``` HEAD is now at 7508fd2 Merge pull request #236 from RobertCochran/generate-build-files libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' configure.ac:5: installing './compile' configure.ac:5: installing './config.guess' configure.ac:5: installing './config.sub' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' Makefile.am: installing './depcomp' checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... gawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes checking whether UID '1000' is supported by ustar format... yes checking whether GID '1000' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking dependency style of gcc... gcc3 checking if pointers to integers require aligned access... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking dependency style of g++... gcc3 checking size of size_t... 8 checking size of unsigned int... 4 checking size of unsigned long... 8 checking size of unsigned long long... 8 checking lzma.h usability... yes checking lzma.h presence... yes checking for lzma.h... yes checking for lzma_easy_buffer_encode in -llzma... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing libtool commands config.status: executing depfiles commands untar-lzma ... failed! ```

This worked:

git clone git@github.com:jmacd/xdelta && cd xdelta && wget http://tukaani.org/xz/xz-5.2.1.tar.gz && cd xdelta3 && sed -i 's/1.15/1.14/g' configure.ac && ./generate_build_files.sh && ./configure && ./run_release.sh

Build is running now but with lots of failures for every platform.

After running a build, it looks like everything but the xz stuff fails to build.

State of the build directory after attempting a build with the above commands:

tree -L 2

``` . ├── i686-w64-mingw32-mconsole │ ├── usize32 │ └── usize64 ├── lib-i686-w64-mingw32-mconsole │ ├── bin │ ├── build-lzma.stderr │ ├── build-lzma.stdout │ ├── config.h │ ├── config.log │ ├── config.status │ ├── configure-lzma.stderr │ ├── configure-lzma.stdout │ ├── debug │ ├── Doxyfile │ ├── include │ ├── install-lzma.stderr │ ├── install-lzma.stdout │ ├── lib │ ├── libtool │ ├── Makefile │ ├── po │ ├── share │ ├── src │ ├── stamp-h1 │ └── tests ├── lib-x86_64-pc-linux-gnu-m32 │ ├── config.log │ ├── configure-lzma.stderr │ └── configure-lzma.stdout ├── lib-x86_64-pc-linux-gnu-m64 │ ├── bin │ ├── build-lzma.stderr │ ├── build-lzma.stdout │ ├── config.h │ ├── config.log │ ├── config.status │ ├── configure-lzma.stderr │ ├── configure-lzma.stdout │ ├── debug │ ├── Doxyfile │ ├── include │ ├── install-lzma.stderr │ ├── install-lzma.stdout │ ├── lib │ ├── libtool │ ├── Makefile │ ├── po │ ├── share │ ├── src │ ├── stamp-h1 │ └── tests ├── lib-x86_64-w64-mingw32-mconsole │ ├── bin │ ├── build-lzma.stderr │ ├── build-lzma.stdout │ ├── config.h │ ├── config.log │ ├── config.status │ ├── configure-lzma.stderr │ ├── configure-lzma.stdout │ ├── debug │ ├── Doxyfile │ ├── include │ ├── install-lzma.stderr │ ├── install-lzma.stdout │ ├── lib │ ├── libtool │ ├── Makefile │ ├── po │ ├── share │ ├── src │ ├── stamp-h1 │ └── tests ├── untar-lzma.stderr ├── untar-lzma.stdout ├── x86_64-pc-linux-gnu-m32 │ ├── usize32 │ └── usize64 ├── x86_64-pc-linux-gnu-m32-afl │ ├── usize32 │ └── usize64 ├── x86_64-pc-linux-gnu-m64 │ ├── usize32 │ └── usize64 ├── x86_64-pc-linux-gnu-m64-afl │ ├── usize32 │ └── usize64 ├── x86_64-w64-mingw32-mconsole │ ├── usize32 │ └── usize64 └── xz-5.2.1 ├── ABOUT-NLS ├── aclocal.m4 ├── AUTHORS ├── autogen.sh ├── build-aux ├── ChangeLog ├── config.h.in ├── configure ├── configure.ac ├── COPYING ├── COPYING.GPLv2 ├── COPYING.GPLv3 ├── COPYING.LGPLv2.1 ├── debug ├── doc ├── dos ├── Doxyfile.in ├── extra ├── INSTALL ├── INSTALL.generic ├── lib ├── m4 ├── macosx ├── Makefile.am ├── Makefile.in ├── NEWS ├── PACKAGERS ├── po ├── README ├── src ├── tests ├── THANKS ├── TODO └── windows 59 directories, 66 files ```

cd x86_64-pc-linux-gnu-m64 && tree

``` . ├── usize32 │ ├── xoff32 │ │ ├── config.log │ │ ├── configure-xdelta.stderr │ │ └── configure-xdelta.stdout │ └── xoff64 │ ├── config.log │ ├── configure-xdelta.stderr │ └── configure-xdelta.stdout └── usize64 └── xoff64 ├── config.log ├── configure-xdelta.stderr └── configure-xdelta.stdout 5 directories, 9 files ```

Contents of config.log

``` This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Xdelta3 configure 3.1.1, which was generated by GNU Autoconf 2.69. Invocation command line was $ /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure --host=x86_64-pc-linux-gnu --prefix=/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64/usize64/xoff64 --enable-static --disable-shared --enable-debug-symbols CFLAGS=-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include CXXFLAGS=-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include CPPFLAGS=-I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include LDFLAGS=-m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib CC= CXX= ## --------- ## ## Platform. ## ## --------- ## hostname = bigblue uname -m = x86_64 uname -r = 3.13.0-123-generic uname -s = Linux uname -v = #172+7.0trisquel2 SMP Thu Jun 29 20:03:33 UTC 2017 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /usr/local/games PATH: /home/retrohacker/.bin PATH: /home/retrohacker/.fzf/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2589: checking build system type configure:2603: result: x86_64-unknown-linux-gnu configure:2623: checking host system type configure:2636: result: x86_64-pc-linux-gnu configure:2677: checking how to print strings configure:2704: result: printf configure:2736: checking for x86_64-pc-linux-gnu-gcc configure:2766: result: no configure:2776: checking for gcc configure:2792: found /usr/bin/gcc configure:2803: result: gcc configure:3032: checking for C compiler version configure:3041: gcc --version >&5 gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3052: $? = 0 configure:3041: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04.3' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) configure:3052: $? = 0 configure:3041: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:3052: $? = 4 configure:3041: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion' gcc: fatal error: no input files compilation terminated. configure:3052: $? = 4 configure:3072: checking whether the C compiler works configure:3094: gcc -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib conftest.c >&5 configure:3098: $? = 0 configure:3146: result: yes configure:3149: checking for C compiler default output file name configure:3151: result: a.out configure:3157: checking for suffix of executables configure:3164: gcc -o conftest -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib conftest.c >&5 configure:3168: $? = 0 configure:3190: result: configure:3212: checking whether we are cross compiling configure:3220: gcc -o conftest -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib conftest.c >&5 configure:3224: $? = 0 configure:3231: ./conftest configure:3235: $? = 0 configure:3250: result: no configure:3255: checking for suffix of object files configure:3277: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:3281: $? = 0 configure:3302: result: o configure:3306: checking whether we are using the GNU C compiler configure:3325: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:3325: $? = 0 configure:3334: result: yes configure:3343: checking whether gcc accepts -g configure:3363: gcc -c -g -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:3363: $? = 0 configure:3404: result: yes configure:3421: checking for gcc option to accept ISO C89 configure:3484: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:3484: $? = 0 configure:3497: result: none needed configure:3522: checking whether gcc understands -c and -o together configure:3544: gcc -c conftest.c -o conftest2.o configure:3547: $? = 0 configure:3544: gcc -c conftest.c -o conftest2.o configure:3547: $? = 0 configure:3559: result: yes configure:3576: checking for a sed that does not truncate output configure:3640: result: /bin/sed configure:3658: checking for grep that handles long lines and -e configure:3716: result: /bin/grep configure:3721: checking for egrep configure:3783: result: /bin/grep -E configure:3788: checking for fgrep configure:3850: result: /bin/grep -F configure:3885: checking for ld used by gcc configure:3952: result: /usr/bin/ld configure:3959: checking if the linker (/usr/bin/ld) is GNU ld configure:3974: result: yes configure:3986: checking for BSD- or MS-compatible name lister (nm) configure:4035: result: no configure:4049: checking for x86_64-pc-linux-gnu-dumpbin configure:4079: result: no configure:4049: checking for x86_64-pc-linux-gnu-link configure:4079: result: no configure:4093: checking for dumpbin configure:4123: result: no configure:4093: checking for link configure:4109: found /usr/bin/link configure:4120: result: link -dump configure:4165: checking the name lister (nm) interface configure:4172: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:4175: nm "conftest.o" configure:4178: output 0000000000000000 B some_variable configure:4185: result: BSD nm configure:4188: checking whether ln -s works configure:4192: result: yes configure:4200: checking the maximum length of command line arguments configure:4331: result: 1572864 configure:4348: checking whether the shell understands some XSI constructs configure:4358: result: yes configure:4362: checking whether the shell understands "+=" configure:4368: result: yes configure:4403: checking how to convert x86_64-unknown-linux-gnu file names to x86_64-pc-linux-gnu format configure:4443: result: func_convert_file_noop configure:4450: checking how to convert x86_64-unknown-linux-gnu file names to toolchain format configure:4470: result: func_convert_file_noop configure:4477: checking for /usr/bin/ld option to reload object files configure:4484: result: -r configure:4518: checking for x86_64-pc-linux-gnu-objdump configure:4548: result: no configure:4558: checking for objdump configure:4574: found /usr/bin/objdump configure:4585: result: objdump configure:4617: checking how to recognize dependent libraries configure:4815: result: pass_all configure:4860: checking for x86_64-pc-linux-gnu-dlltool configure:4890: result: no configure:4900: checking for dlltool configure:4930: result: no configure:4960: checking how to associate runtime and link libraries configure:4987: result: printf %s\n configure:5004: checking for x86_64-pc-linux-gnu-ar configure:5034: result: no configure:5048: checking for ar configure:5064: found /usr/bin/ar configure:5075: result: ar configure:5112: checking for archiver @FILE support configure:5129: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:5129: $? = 0 configure:5132: ar cru libconftest.a @conftest.lst >&5 configure:5135: $? = 0 configure:5140: ar cru libconftest.a @conftest.lst >&5 ar: conftest.o: No such file or directory configure:5143: $? = 1 configure:5155: result: @ configure:5173: checking for x86_64-pc-linux-gnu-strip configure:5203: result: no configure:5213: checking for strip configure:5229: found /usr/bin/strip configure:5240: result: strip configure:5272: checking for x86_64-pc-linux-gnu-ranlib configure:5302: result: no configure:5312: checking for ranlib configure:5328: found /usr/bin/ranlib configure:5339: result: ranlib configure:5416: checking for gawk configure:5432: found /usr/bin/gawk configure:5443: result: gawk configure:5483: checking command to parse nm output from gcc object configure:5603: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:5606: $? = 0 configure:5610: nm conftest.o \| sed -n -e 's/^.*[ ]$[ABCDGIRSTW][ABCDGIRSTW]*$[ ][ ]*$[_A-Za-z][_A-Za-z0-9]*$$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:5613: $? = 0 configure:5679: gcc -o conftest -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib conftest.c conftstm.o >&5 configure:5682: $? = 0 configure:5720: result: ok configure:5757: checking for sysroot configure:5787: result: no configure:5864: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:5867: $? = 0 configure:6016: checking for x86_64-pc-linux-gnu-mt configure:6046: result: no configure:6056: checking for mt configure:6072: found /bin/mt configure:6083: result: mt configure:6106: checking if mt is a manifest tool configure:6112: mt '-?' configure:6120: result: no configure:6762: checking how to run the C preprocessor configure:6793: gcc -E -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c configure:6793: $? = 0 configure:6807: gcc -E -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory #include ^ compilation terminated. configure:6807: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Xdelta3" | #define PACKAGE_TARNAME "xdelta3" | #define PACKAGE_VERSION "3.1.1" | #define PACKAGE_STRING "Xdelta3 3.1.1" | #define PACKAGE_BUGREPORT "josh.macdonald@gmail.com" | #define PACKAGE_URL "http://xdelta.org/" | /* end confdefs.h. */ | #include configure:6832: result: gcc -E configure:6852: gcc -E -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c configure:6852: $? = 0 configure:6866: gcc -E -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory #include ^ compilation terminated. configure:6866: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Xdelta3" | #define PACKAGE_TARNAME "xdelta3" | #define PACKAGE_VERSION "3.1.1" | #define PACKAGE_STRING "Xdelta3 3.1.1" | #define PACKAGE_BUGREPORT "josh.macdonald@gmail.com" | #define PACKAGE_URL "http://xdelta.org/" | /* end confdefs.h. */ | #include configure:6895: checking for ANSI C header files configure:6915: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:6915: $? = 0 configure:6988: gcc -o conftest -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib conftest.c >&5 configure:6988: $? = 0 configure:6988: ./conftest configure:6988: $? = 0 configure:6999: result: yes configure:7012: checking for sys/types.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for sys/stat.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for stdlib.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for string.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for memory.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for strings.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for inttypes.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for stdint.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7012: checking for unistd.h configure:7012: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7012: $? = 0 configure:7012: result: yes configure:7026: checking for dlfcn.h configure:7026: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include conftest.c >&5 configure:7026: $? = 0 configure:7026: result: yes configure:7232: checking for objdir configure:7247: result: .libs configure:7518: checking if gcc supports -fno-rtti -fno-exceptions configure:7536: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default] configure:7540: $? = 0 configure:7553: result: no configure:7880: checking for gcc option to produce PIC configure:7887: result: -fPIC -DPIC configure:7895: checking if gcc PIC flag -fPIC -DPIC works configure:7913: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -fPIC -DPIC -DPIC conftest.c >&5 configure:7917: $? = 0 configure:7930: result: yes configure:7959: checking if gcc static flag -static works configure:7987: result: yes configure:8002: checking if gcc supports -c -o file.o configure:8023: gcc -c -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -o out/conftest2.o conftest.c >&5 configure:8027: $? = 0 configure:8049: result: yes configure:8057: checking if gcc supports -c -o file.o configure:8104: result: yes configure:8137: checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries configure:9294: result: yes configure:9534: checking dynamic linker characteristics configure:10034: gcc -o conftest -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib -Wl,-rpath -Wl,/foo conftest.c >&5 configure:10034: $? = 0 configure:10268: result: GNU/Linux ld.so configure:10375: checking how to hardcode library paths into programs configure:10400: result: immediate configure:10940: checking whether stripping libraries is possible configure:10945: result: yes configure:10980: checking if libtool supports shared libraries configure:10982: result: yes configure:10985: checking whether to build shared libraries configure:11006: result: no configure:11009: checking whether to build static libraries configure:11013: result: yes configure:11066: checking for a BSD-compatible install configure:11134: result: /usr/bin/install -c configure:11145: checking whether build environment is sane configure:11200: result: yes configure:11348: checking for a thread-safe mkdir -p configure:11387: result: /bin/mkdir -p configure:11390: checking whether make sets $(MAKE) configure:11412: result: yes configure:11442: checking for style of include used by make configure:11470: result: GNU configure:11504: checking whether make supports nested variables configure:11521: result: yes configure:11538: error: source directory already configured; run "make distclean" there first ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-unknown-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set=set ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include' ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value=-I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include' ac_cv_env_CXX_set=set ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib' ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=x86_64-pc-linux-gnu ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_header_dlfcn_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-pc-linux-gnu ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_SED=/bin/sed ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=gawk ac_cv_prog_CPP='gcc -E' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_DUMPBIN='link -dump' ac_cv_prog_ac_ct_MANIFEST_TOOL=mt ac_cv_prog_ac_ct_OBJDUMP=objdump ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_make_make_set=yes am_cv_make_support_nested_variables=yes am_cv_prog_cc_c_o=yes lt_cv_ar_at_file=@ lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM=no lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_gnu_ld=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=no lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]$[ABCDGIRSTW][ABCDGIRSTW]*$[ ][ ]*$[_A-Za-z][_A-Za-z0-9]*$$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: $[^ ]*$[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* $[^ ]*$ $[^ ]*$$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: $[^ ]*$[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* $[^ ]*$ $lib[^ ]*$$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* $[^ ]*$ $[^ ]*$$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* $.*$$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* $.*$$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='1' AM_V='$(V)' AR='ar' AUTOCONF='' AUTOHEADER='' AUTOMAKE='' AWK='gawk' CC='gcc' CCDEPMODE='' CFLAGS='-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include' CPP='gcc -E' CPPFLAGS='-I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include' CXX='' CXXCPP='' CXXDEPMODE='' CXXFLAGS='-m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include' CYGPATH_W='' DEBUG_SYMBOLS_FALSE='' DEBUG_SYMBOLS_TRUE='' DEFS='' DEPDIR='.deps' DLLTOOL='false' DSYMUTIL='' DUMPBIN=':' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/grep -E' EXEEXT='' FGREP='/bin/grep -F' GREP='/bin/grep' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='/usr/bin/ld -m elf_x86_64' LDFLAGS='-m64 -L/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/lib' LIBOBJS='' LIBS='' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIPO='' LN_S='ln -s' LTLIBOBJS='' MAKEINFO='' MANIFEST_TOOL=':' MKDIR_P='/bin/mkdir -p' NM='nm' NMEDIT='' OBJDUMP='objdump' OBJEXT='o' OTOOL64='' OTOOL='' PACKAGE='' PACKAGE_BUGREPORT='josh.macdonald@gmail.com' PACKAGE_NAME='Xdelta3' PACKAGE_STRING='Xdelta3 3.1.1' PACKAGE_TARNAME='xdelta3' PACKAGE_URL='http://xdelta.org/' PACKAGE_VERSION='3.1.1' PATH_SEPARATOR=':' RANLIB='ranlib' SED='/bin/sed' SET_MAKE='' SHELL='/bin/bash' STRIP='strip' VERSION='' ac_ct_AR='ar' ac_ct_CC='gcc' ac_ct_CXX='' ac_ct_DUMPBIN='link -dump' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='' am__include='include' am__isrc=' -I$(srcdir)' am__leading_dot='.' am__nodep='_no' am__quote='' am__tar='' am__untar='' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='x86_64-pc-linux-gnu' host_alias='x86_64-pc-linux-gnu' host_cpu='x86_64' host_os='linux-gnu' host_vendor='pc' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/retrohacker/Development/orion/deps/xdelta/xdelta3/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64/usize64/xoff64' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "Xdelta3" #define PACKAGE_TARNAME "xdelta3" #define PACKAGE_VERSION "3.1.1" #define PACKAGE_STRING "Xdelta3 3.1.1" #define PACKAGE_BUGREPORT "josh.macdonald@gmail.com" #define PACKAGE_URL "http://xdelta.org/" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" configure: exit 1 ```

Contents of configure-xdelta.stderr

``` configure: error: source directory already configured; run "make distclean" there first ```

Contents of configure-xdelta.stdout

``` checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for x86_64-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... no checking for x86_64-pc-linux-gnu-dumpbin... no checking for x86_64-pc-linux-gnu-link... no checking for dumpbin... no checking for link... link -dump checking the name lister (nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for x86_64-pc-linux-gnu-strip... no checking for strip... strip checking for x86_64-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking for gawk... gawk checking command to parse nm output from gcc object... ok checking for sysroot... no checking for x86_64-pc-linux-gnu-mt... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... no checking whether to build static libraries... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes ```

Ah, looks like I'm not supposed to be running ./configure myself. Updated command that seems to have built a subset of all platforms:

git clone git@github.com:jmacd/xdelta && cd xdelta && wget http://tukaani.org/xz/xz-5.2.1.tar.gz && cd xdelta3 && sed -i 's/1.15/1.14/g' configure.ac && ./generate_build_files.sh && ./run_release.sh

It isn't entirely clear what to do after running ./run_release.sh, I'm not seeing any shared libraries or anything.

Output of ./run_release.sh

``` untar-lzma ... success Host x86_64-pc-linux-gnu-m32 afl=0 ... liblzma configure-lzma ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/xz-5.2.1/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m32 ... x86_64-pc-linux-gnu-m32-32-32 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32/usize32/xoff32 ... x86_64-pc-linux-gnu-m32-32-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32/usize32/xoff64 ... x86_64-pc-linux-gnu-m32-64-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32/usize64/xoff64 Host x86_64-pc-linux-gnu-m32 afl=1 ... liblzma configure-lzma ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/xz-5.2.1/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m32 ... x86_64-pc-linux-gnu-m32-afl-32-32 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32-afl/usize32/xoff32 ... x86_64-pc-linux-gnu-m32-afl-32-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32-afl/usize32/xoff64 ... x86_64-pc-linux-gnu-m32-afl-64-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m32-afl/usize64/xoff64 Host x86_64-pc-linux-gnu-m64 afl=0 ... liblzma configure-lzma ... success build-lzma ... success install-lzma ... success ... x86_64-pc-linux-gnu-m64-32-32 configure-xdelta ... success ... x86_64-pc-linux-gnu-m64-32-64 configure-xdelta ... success ... x86_64-pc-linux-gnu-m64-64-64 configure-xdelta ... success Host x86_64-pc-linux-gnu-m64 afl=1 ... liblzma configure-lzma ... success build-lzma ... success install-lzma ... success ... x86_64-pc-linux-gnu-m64-afl-32-32 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64-afl/usize32/xoff32 ... x86_64-pc-linux-gnu-m64-afl-32-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64-afl/usize32/xoff64 ... x86_64-pc-linux-gnu-m64-afl-64-64 configure-xdelta ... failed! Error /home/retrohacker/Development/orion/deps/xdelta/xdelta3/configure in /home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64-afl/usize64/xoff64 Host i686-w64-mingw32-mconsole afl=0 ... liblzma configure-lzma ... success build-lzma ... success install-lzma ... success ... i686-w64-mingw32-mconsole-32-32 configure-xdelta ... success ... i686-w64-mingw32-mconsole-32-64 configure-xdelta ... success ... i686-w64-mingw32-mconsole-64-64 configure-xdelta ... success Host x86_64-w64-mingw32-mconsole afl=0 ... liblzma configure-lzma ... success build-lzma ... success install-lzma ... success ... x86_64-w64-mingw32-mconsole-32-32 configure-xdelta ... success ... x86_64-w64-mingw32-mconsole-32-64 configure-xdelta ... success ... x86_64-w64-mingw32-mconsole-64-64 configure-xdelta ... success ```

Contents of build/x86_64-pc-linux-gnu-m64/usize64/xoff64

``` . ├── config.h ├── config.log ├── config.status ├── configure-xdelta.stderr ├── configure-xdelta.stdout ├── libtool ├── Makefile ├── stamp-h1 └── testing 1 directory, 8 files ```

There is a Makefile and a libtool file. I think I'm supposed to run the Makefile, but when I run make:

Output of make

``` make all-am make[1]: Entering directory `/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64/usize64/xoff64' gcc -DHAVE_CONFIG_H -I. -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wformat=2 -Wno-format-nonliteral -Wno-unused-parameter -Wno-unused-function -std=c99 -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -g -DXD3_DEBUG=0 -m64 -DXD3_USE_LARGESIZET=1 -DXD3_USE_LARGEFILE64=1 -I/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/lib-x86_64-pc-linux-gnu-m64/include -MT xdelta3-xdelta3.o -MD -MP -MF .deps/xdelta3-xdelta3.Tpo -c -o xdelta3-xdelta3.o `test -f 'xdelta3.c' || echo '/home/retrohacker/Development/orion/deps/xdelta/xdelta3/'`xdelta3.c In file included from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:30:0, from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.c:264: ./config.h:66:23: error: expected declaration specifiers or ‘...’ before numeric constant #define SIZEOF_SIZE_T 8 ^ /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:170:15: note: in expansion of macro ‘SIZEOF_SIZE_T’ static_assert(SIZEOF_SIZE_T == sizeof(size_t), "SIZEOF_SIZE_T not correctly set"); ^ In file included from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.c:264:0: /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:170:48: error: expected declaration specifiers or ‘...’ before string constant static_assert(SIZEOF_SIZE_T == sizeof(size_t), "SIZEOF_SIZE_T not correctly set"); ^ In file included from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:30:0, from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.c:264: ./config.h:75:35: error: expected declaration specifiers or ‘...’ before numeric constant #define SIZEOF_UNSIGNED_LONG_LONG 8 ^ /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:171:15: note: in expansion of macro ‘SIZEOF_UNSIGNED_LONG_LONG’ static_assert(SIZEOF_UNSIGNED_LONG_LONG == sizeof(unsigned long long), "SIZEOF_UNSIGNED_LONG_LONG not correctly set"); ^ In file included from /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.c:264:0: /home/retrohacker/Development/orion/deps/xdelta/xdelta3/xdelta3.h:171:72: error: expected declaration specifiers or ‘...’ before string constant static_assert(SIZEOF_UNSIGNED_LONG_LONG == sizeof(unsigned long long), "SIZEOF_UNSIGNED_LONG_LONG not correctly set"); ^ make[1]: *** [xdelta3-xdelta3.o] Error 1 make[1]: Leaving directory `/home/retrohacker/Development/orion/deps/xdelta/xdelta3/build/x86_64-pc-linux-gnu-m64/usize64/xoff64' make: *** [all] Error 2 ```

Okay, I can get build/x86_64-pc-linux-gnu-m64/usize32/xoff32 to build using make but usize32/xoff64 and usize64/xoff64 fail with the above error.

Here is the command I used to build a single target on Trisquel Linux x64:

git clone git@github.com:jmacd/xdelta && cd xdelta && wget http://tukaani.org/xz/xz-5.2.1.tar.gz && cd xdelta3 && sed -i 's/1.15/1.14/g' configure.ac && ./generate_build_files.sh && ./run_release.sh && cd build/x86_64-pc-linux-gnu-m64/usize32/xoff32/ && make

But now I'm not quite sure what to do with what comes out of the build:

tree x86_64-pc-linux-gnu-m64/usize32/xoff32

``` . ├── config.h ├── config.log ├── config.status ├── configure-xdelta.stderr ├── configure-xdelta.stdout ├── libtool ├── Makefile ├── stamp-h1 ├── testing │ ├── xdelta3checksum-checksum_test_c.o │ ├── xdelta3checksum-checksum_test.o │ ├── xdelta3regtest-regtest_c.o │ └── xdelta3regtest-regtest.o ├── xdelta3 ├── xdelta3checksum ├── xdelta3decode ├── xdelta3decode-xdelta3.o ├── xdelta3regtest └── xdelta3-xdelta3.o 1 directory, 18 files ```

I don't get any header files, and copying the top level xdelta3.h file into the current directory and trying to build anything with it gives me more errors:

index.c

#include "xdelta3.h"
xd3_stream stream;

int main() {
}

gcc index.c

``` In file included from index.c:1:0: xdelta3.h:170:29: error: expected ‘)’ before ‘==’ token static_assert(SIZEOF_SIZE_T == sizeof(size_t), "SIZEOF_SIZE_T not correctly set"); ^ xdelta3.h:171:41: error: expected ‘)’ before ‘==’ token static_assert(SIZEOF_UNSIGNED_LONG_LONG == sizeof(unsigned long long), "SIZEOF_UNSIGNED_LONG_LONG not correctly set"); ^ xdelta3.h:250:2: error: #error Bad configure script #error Bad configure script ^ xdelta3.h:361:9: error: unknown type name ‘usize_t’ usize_t size); ^ xdelta3.h:367:9: error: unknown type name ‘xoff_t’ xoff_t blkno); ^ xdelta3.h:644:3: error: unknown type name ‘usize_t’ usize_t pos; ^ xdelta3.h:645:3: error: unknown type name ‘usize_t’ usize_t size; ^ xdelta3.h:646:3: error: unknown type name ‘xoff_t’ xoff_t addr; ^ xdelta3.h:663:3: error: unknown type name ‘usize_t’ usize_t size; ^ xdelta3.h:664:3: error: unknown type name ‘usize_t’ usize_t addr; ^ xdelta3.h:672:3: error: unknown type name ‘usize_t’ usize_t size; ^ xdelta3.h:673:3: error: unknown type name ‘xoff_t’ xoff_t addr; ^ xdelta3.h:674:3: error: unknown type name ‘xoff_t’ xoff_t position; /* absolute position of this inst */ ^ xdelta3.h:681:3: error: unknown type name ‘usize_t’ usize_t next; ^ xdelta3.h:682:3: error: unknown type name ‘usize_t’ usize_t avail; ^ xdelta3.h:691:3: error: unknown type name ‘usize_t’ usize_t size; ^ xdelta3.h:692:3: error: unknown type name ‘usize_t’ usize_t pos; ^ xdelta3.h:696:3: error: unknown type name ‘usize_t’ usize_t alloc1; ^ xdelta3.h:700:3: error: unknown type name ‘usize_t’ usize_t alloc2; ^ xdelta3.h:706:3: error: unknown type name ‘usize_t’ usize_t s_near; ^ xdelta3.h:707:3: error: unknown type name ‘usize_t’ usize_t s_same; ^ xdelta3.h:708:3: error: unknown type name ‘usize_t’ usize_t next_slot; /* the circular index for near */ ^ xdelta3.h:709:3: error: unknown type name ‘usize_t’ usize_t *near_array; /* array of size s_near */ ^ xdelta3.h:710:3: error: unknown type name ‘usize_t’ usize_t *same_array; /* array of size s_same*256 */ ^ xdelta3.h:727:3: error: unknown type name ‘usize_t’ usize_t large_look; ^ xdelta3.h:728:3: error: unknown type name ‘usize_t’ usize_t large_step; ^ xdelta3.h:729:3: error: unknown type name ‘usize_t’ usize_t small_look; ^ xdelta3.h:730:3: error: unknown type name ‘usize_t’ usize_t small_chain; ^ xdelta3.h:731:3: error: unknown type name ‘usize_t’ usize_t small_lchain; ^ xdelta3.h:732:3: error: unknown type name ‘usize_t’ usize_t max_lazy; ^ xdelta3.h:733:3: error: unknown type name ‘usize_t’ usize_t long_enough; ^ xdelta3.h:739:3: error: unknown type name ‘usize_t’ usize_t size; // Number of buckets ^ xdelta3.h:740:3: error: unknown type name ‘usize_t’ usize_t shift; ^ xdelta3.h:741:3: error: unknown type name ‘usize_t’ usize_t mask; ^ xdelta3.h:742:3: error: unknown type name ‘usize_t’ usize_t look; // How wide is this checksum ^ xdelta3.h:743:3: error: unknown type name ‘usize_t’ usize_t multiplier; // K * powers[0] ^ xdelta3.h:744:3: error: unknown type name ‘usize_t’ usize_t *powers; // Array of [0,look) where powers[look-1] == 1 ^ xdelta3.h:751:3: error: unknown type name ‘usize_t’ usize_t last_pos; ^ xdelta3.h:756:3: error: unknown type name ‘xoff_t’ xoff_t offset; ^ xdelta3.h:757:3: error: unknown type name ‘usize_t’ usize_t length; ^ xdelta3.h:763:3: error: unknown type name ‘usize_t’ usize_t addslen; ^ xdelta3.h:765:3: error: unknown type name ‘usize_t’ usize_t adds_alloc; ^ xdelta3.h:767:3: error: unknown type name ‘usize_t’ usize_t instlen; ^ xdelta3.h:769:3: error: unknown type name ‘usize_t’ usize_t inst_alloc; ^ xdelta3.h:771:3: error: unknown type name ‘usize_t’ usize_t wininfolen; ^ xdelta3.h:773:3: error: unknown type name ‘usize_t’ usize_t wininfo_alloc; ^ xdelta3.h:775:3: error: unknown type name ‘xoff_t’ xoff_t length; ^ xdelta3.h:786:3: error: unknown type name ‘usize_t’ usize_t ngroups; /* Number of DJW Huffman groups. */ ^ xdelta3.h:787:3: error: unknown type name ‘usize_t’ usize_t sector_size; /* Sector size. */ ^ xdelta3.h:794:3: error: unknown type name ‘usize_t’ usize_t winsize; /* The encoder window size. */ ^ xdelta3.h:795:3: error: unknown type name ‘usize_t’ usize_t sprevsz; /* How far back small string ^ xdelta3.h:797:3: error: unknown type name ‘usize_t’ usize_t iopt_size; /* entries in the ^ xdelta3.h:801:3: error: unknown type name ‘xd3_getblk_func’ xd3_getblk_func *getblk; /* The three callbacks. */ ^ xdelta3.h:802:3: error: unknown type name ‘xd3_alloc_func’ xd3_alloc_func *alloc; ^ xdelta3.h:829:3: error: unknown type name ‘usize_t’ usize_t blksize; /* block size */ ^ xdelta3.h:833:3: error: unknown type name ‘xoff_t’ xoff_t max_winsize; /* maximum visible buffer */ ^ xdelta3.h:836:3: error: unknown type name ‘xoff_t’ xoff_t curblkno; /* current block number: client ^ xdelta3.h:838:3: error: unknown type name ‘usize_t’ usize_t onblk; /* number of bytes on current ^ xdelta3.h:845:3: error: unknown type name ‘usize_t’ usize_t srclen; /* length of this source window */ ^ xdelta3.h:846:3: error: unknown type name ‘xoff_t’ xoff_t srcbase; /* offset of this source window ^ xdelta3.h:848:3: error: unknown type name ‘usize_t’ usize_t shiftby; /* for power-of-two blocksizes */ ^ xdelta3.h:849:3: error: unknown type name ‘usize_t’ usize_t maskby; /* for power-of-two blocksizes */ ^ xdelta3.h:850:3: error: unknown type name ‘xoff_t’ xoff_t cpyoff_blocks; /* offset of dec_cpyoff in blocks */ ^ xdelta3.h:851:3: error: unknown type name ‘usize_t’ usize_t cpyoff_blkoff; /* offset of copy window in ^ xdelta3.h:853:3: error: unknown type name ‘xoff_t’ xoff_t getblkno; /* request block number: xd3 sets ^ xdelta3.h:857:3: error: unknown type name ‘xoff_t’ xoff_t max_blkno; /* Maximum block, if eof is known, ^ xdelta3.h:860:3: error: unknown type name ‘usize_t’ usize_t onlastblk; /* Number of bytes on max_blkno */ ^ xdelta3.h:872:3: error: unknown type name ‘usize_t’ usize_t avail_in; /* number of bytes available at ^ xdelta3.h:874:3: error: unknown type name ‘xoff_t’ xoff_t total_in; /* how many bytes in */ ^ xdelta3.h:878:3: error: unknown type name ‘usize_t’ usize_t avail_out; /* number of bytes available at ^ xdelta3.h:880:3: error: unknown type name ‘usize_t’ usize_t space_out; /* total out space */ ^ xdelta3.h:881:3: error: unknown type name ‘xoff_t’ xoff_t current_window; /* number of windows encoded/decoded */ ^ xdelta3.h:882:3: error: unknown type name ‘xoff_t’ xoff_t total_out; /* how many bytes out */ ^ xdelta3.h:892:3: error: unknown type name ‘usize_t’ usize_t winsize; /* suggested window size */ ^ xdelta3.h:893:3: error: unknown type name ‘usize_t’ usize_t sprevsz; /* small string, previous window ^ xdelta3.h:895:3: error: unknown type name ‘usize_t’ usize_t sprevmask; /* small string, previous window ^ xdelta3.h:897:3: error: unknown type name ‘usize_t’ usize_t iopt_size; ^ xdelta3.h:898:3: error: unknown type name ‘usize_t’ usize_t iopt_unlimited; ^ xdelta3.h:901:3: error: unknown type name ‘xd3_getblk_func’ xd3_getblk_func *getblk; /* set nxtblk, nxtblkno to scanblkno */ ^ xdelta3.h:902:3: error: unknown type name ‘xd3_alloc_func’ xd3_alloc_func *alloc; /* malloc function */ ^ xdelta3.h:915:3: error: unknown type name ‘usize_t’ usize_t *large_table; /* table of large checksums */ ^ xdelta3.h:918:3: error: unknown type name ‘usize_t’ usize_t *small_table; /* table of small checksums */ ^ xdelta3.h:928:3: error: unknown type name ‘usize_t’ usize_t taroff; /* base offset of the target input */ ^ xdelta3.h:929:3: error: unknown type name ‘usize_t’ usize_t input_position; /* current input position */ ^ xdelta3.h:930:3: error: unknown type name ‘usize_t’ usize_t min_match; /* current minimum match ^ xdelta3.h:933:3: error: unknown type name ‘usize_t’ usize_t unencoded_offset; /* current input, first ^ xdelta3.h:947:3: error: unknown type name ‘xoff_t’ xoff_t srcwin_cksum_pos; /* Source checksum position */ ^ xdelta3.h:951:3: error: unknown type name ‘xoff_t’ xoff_t match_srcpos; /* current match source ^ xdelta3.h:954:3: error: unknown type name ‘xoff_t’ xoff_t match_last_srcpos; /* previously attempted ^ xdelta3.h:956:3: error: unknown type name ‘xoff_t’ xoff_t match_minaddr; /* smallest matching address to ^ xdelta3.h:959:3: error: unknown type name ‘xoff_t’ xoff_t match_maxaddr; /* largest matching address to ^ xdelta3.h:962:3: error: unknown type name ‘usize_t’ usize_t match_back; /* match extends back so far */ ^ xdelta3.h:963:3: error: unknown type name ‘usize_t’ usize_t match_maxback; /* match extends back maximum */ ^ xdelta3.h:964:3: error: unknown type name ‘usize_t’ usize_t match_fwd; /* match extends forward so far */ ^ xdelta3.h:965:3: error: unknown type name ‘usize_t’ usize_t match_maxfwd; /* match extends forward maximum */ ^ xdelta3.h:967:3: error: unknown type name ‘xoff_t’ xoff_t maxsrcaddr; /* address of the last source ^ xdelta3.h:971:3: error: unknown type name ‘usize_t’ usize_t buf_avail; /* amount of saved input */ ^ xdelta3.h:974:3: error: unknown type name ‘usize_t’ usize_t buf_leftavail; /* amount of leftover content */ ^ xdelta3.h:991:3: error: unknown type name ‘usize_t’ usize_t enc_appheadsz; /* application header size */ ^ xdelta3.h:995:3: error: unknown type name ‘usize_t’ usize_t dec_hdr_ind; /* VCDIFF header indicator */ ^ xdelta3.h:996:3: error: unknown type name ‘usize_t’ usize_t dec_win_ind; /* VCDIFF window indicator */ ^ xdelta3.h:997:3: error: unknown type name ‘usize_t’ usize_t dec_del_ind; /* VCDIFF delta indicator */ ^ xdelta3.h:1000:3: error: unknown type name ‘usize_t’ usize_t dec_magicbytes; /* Magic position. */ ^ xdelta3.h:1002:3: error: unknown type name ‘usize_t’ usize_t dec_secondid; /* Optional secondary compressor ID. */ ^ xdelta3.h:1004:3: error: unknown type name ‘usize_t’ usize_t dec_codetblsz; /* Optional code table: length. */ ^ xdelta3.h:1006:3: error: unknown type name ‘usize_t’ usize_t dec_codetblbytes; /* Optional code table: position. */ ^ xdelta3.h:1008:3: error: unknown type name ‘usize_t’ usize_t dec_appheadsz; /* Optional application header: ^ xdelta3.h:1012:3: error: unknown type name ‘usize_t’ usize_t dec_appheadbytes; /* Optional application header: ^ xdelta3.h:1015:3: error: unknown type name ‘usize_t’ usize_t dec_cksumbytes; /* Optional checksum: position. */ ^ xdelta3.h:1019:3: error: unknown type name ‘usize_t’ usize_t dec_cpylen; /* length of copy window ^ xdelta3.h:1021:3: error: unknown type name ‘xoff_t’ xoff_t dec_cpyoff; /* offset of copy window ^ xdelta3.h:1023:3: error: unknown type name ‘usize_t’ usize_t dec_enclen; /* length of delta encoding */ ^ xdelta3.h:1024:3: error: unknown type name ‘usize_t’ usize_t dec_tgtlen; /* length of target window */ ^ xdelta3.h:1033:3: error: unknown type name ‘xoff_t’ xoff_t dec_winstart; /* offset of the start of ^ xdelta3.h:1035:3: error: unknown type name ‘xoff_t’ xoff_t dec_window_count; /* == current_window + 1 in ^ xdelta3.h:1037:3: error: unknown type name ‘usize_t’ usize_t dec_winbytes; /* bytes of the three sections ^ xdelta3.h:1039:3: error: unknown type name ‘usize_t’ usize_t dec_hdrsize; /* VCDIFF + app header size */ ^ xdelta3.h:1048:3: error: unknown type name ‘usize_t’ usize_t dec_position; /* current decoder position ^ xdelta3.h:1051:3: error: unknown type name ‘usize_t’ usize_t dec_maxpos; /* maximum decoder position ^ xdelta3.h:1060:3: error: unknown type name ‘usize_t’ usize_t dec_lastlen; /* length of the last target ^ xdelta3.h:1062:3: error: unknown type name ‘xoff_t’ xoff_t dec_laststart; /* offset of the start of last ^ xdelta3.h:1064:3: error: unknown type name ‘usize_t’ usize_t dec_lastspace; /* allocated space of last ^ xdelta3.h:1088:3: error: unknown type name ‘xoff_t’ xoff_t n_scpy; ^ xdelta3.h:1089:3: error: unknown type name ‘xoff_t’ xoff_t n_tcpy; ^ xdelta3.h:1090:3: error: unknown type name ‘xoff_t’ xoff_t n_add; ^ xdelta3.h:1091:3: error: unknown type name ‘xoff_t’ xoff_t n_run; ^ xdelta3.h:1093:3: error: unknown type name ‘xoff_t’ xoff_t l_scpy; ^ xdelta3.h:1094:3: error: unknown type name ‘xoff_t’ xoff_t l_tcpy; ^ xdelta3.h:1095:3: error: unknown type name ‘xoff_t’ xoff_t l_add; ^ xdelta3.h:1096:3: error: unknown type name ‘xoff_t’ xoff_t l_run; ^ xdelta3.h:1098:3: error: unknown type name ‘usize_t’ usize_t i_slots_used; ^ xdelta3.h:1123:7: error: unknown type name ‘usize_t’ usize_t input_size, ^ xdelta3.h:1125:7: error: unknown type name ‘usize_t’ usize_t source_size, ^ xdelta3.h:1127:7: error: unknown type name ‘usize_t’ usize_t *output_size, ^ xdelta3.h:1128:7: error: unknown type name ‘usize_t’ usize_t avail_output, ^ xdelta3.h:1133:7: error: unknown type name ‘usize_t’ usize_t input_size, ^ xdelta3.h:1135:7: error: unknown type name ‘usize_t’ usize_t source_size, ^ xdelta3.h:1137:7: error: unknown type name ‘usize_t’ usize_t *output_size, ^ xdelta3.h:1138:7: error: unknown type name ‘usize_t’ usize_t avail_output, ^ xdelta3.h:1184:7: error: unknown type name ‘usize_t’ usize_t input_size, ^ xdelta3.h:1186:7: error: unknown type name ‘usize_t’ usize_t *output_size, ^ xdelta3.h:1187:7: error: unknown type name ‘usize_t’ usize_t avail_output); ^ xdelta3.h:1192:7: error: unknown type name ‘usize_t’ usize_t input_size, ^ xdelta3.h:1194:7: error: unknown type name ‘usize_t’ usize_t *output_size, ^ xdelta3.h:1195:7: error: unknown type name ‘usize_t’ usize_t avail_size); ^ xdelta3.h:1295:6: error: unknown type name ‘xoff_t’ xoff_t source_size); ^ xdelta3.h:1301:7: error: unknown type name ‘usize_t’ usize_t size); ^ xdelta3.h:1309:7: error: unknown type name ‘usize_t’ usize_t *size); ^ xdelta3.h:1323:8: error: unknown type name ‘usize_t’ usize_t pos, usize_t size, ^ xdelta3.h:1323:21: error: unknown type name ‘usize_t’ usize_t pos, usize_t size, ^ xdelta3.h:1324:8: error: unknown type name ‘xoff_t’ xoff_t addr, int is_source); ^ xdelta3.h:1359:6: error: unknown type name ‘usize_t’ usize_t isize) ^ xdelta3.h:1387:1: error: unknown type name ‘xoff_t’ xoff_t xd3_encoder_srcbase (xd3_stream *stream) { ^ xdelta3.h:1391:1: error: unknown type name ‘usize_t’ usize_t xd3_encoder_srclen (xd3_stream *stream) { ^ xdelta3.h:1418:1: error: unknown type name ‘xoff_t’ void xd3_blksize_div (const xoff_t offset, ^ xdelta3.h:1420:9: error: unknown type name ‘xoff_t’ xoff_t *blkno, ^ xdelta3.h:1421:9: error: unknown type name ‘usize_t’ usize_t *blkoff) { ^ xdelta3.h:1428:23: error: unknown type name ‘xoff_t’ void xd3_blksize_add (xoff_t *blkno, ^ xdelta3.h:1429:9: error: unknown type name ‘usize_t’ usize_t *blkoff, ^ xdelta3.h:1431:9: error: unknown type name ‘usize_t’ const usize_t add) ^ ```

Hmm, this seems to make some of the errors go away:

gcc -DHAVE_CONFIG_H index.c

In file included from xdelta3.h:30:0,
                 from index.c:1:
config.h:66:23: error: expected declaration specifiers or ‘...’ before numeric constant
 #define SIZEOF_SIZE_T 8
                       ^
xdelta3.h:170:15: note: in expansion of macro ‘SIZEOF_SIZE_T’
 static_assert(SIZEOF_SIZE_T == sizeof(size_t), "SIZEOF_SIZE_T not correctly set");
               ^
In file included from index.c:1:0:
xdelta3.h:170:48: error: expected declaration specifiers or ‘...’ before string constant
 static_assert(SIZEOF_SIZE_T == sizeof(size_t), "SIZEOF_SIZE_T not correctly set");
                                                ^
In file included from xdelta3.h:30:0,
                 from index.c:1:
config.h:75:35: error: expected declaration specifiers or ‘...’ before numeric constant
 #define SIZEOF_UNSIGNED_LONG_LONG 8
                                   ^
xdelta3.h:171:15: note: in expansion of macro ‘SIZEOF_UNSIGNED_LONG_LONG’
 static_assert(SIZEOF_UNSIGNED_LONG_LONG == sizeof(unsigned long long), "SIZEOF_UNSIGNED_LONG_LONG not correctly set");
               ^
In file included from index.c:1:0:
xdelta3.h:171:72: error: expected declaration specifiers or ‘...’ before string constant
 static_assert(SIZEOF_UNSIGNED_LONG_LONG == sizeof(unsigned long long), "SIZEOF_UNSIGNED_LONG_LONG not correctly set");
                                                                        ^

I'm having exactly the same problem (Ubuntu 16.04.3 LTS). Running make in build/x86_64-pc-linux-gnu-m64/usize32/xoff32 will successfully create an executable, but all others fail with the same messages relating to SIZEOF_SIZE_T etc.

I assume we're missing a tool or dependency somewhere, but I don't have the level of C/C++/tooling knowledge to figure out what... I've added an issue requesting some basic help: #237

I got it to work partially:

fresh MSys64 installation from here: https://www.msys2.org/ (the x86_64)

commands in msys shell: pacman -S --noconfirm git pacman -S --noconfirm --needed base-devel pacman -S --noconfirm --needed msys2-devel pacman -S --noconfirm --needed mingw-w64-i686-toolchain pacman -S --noconfirm --needed mingw-w64-x86_64-toolchain

git clone --recursive https://github.com/jmacd/xdelta.git cd xdelta/ wget https://kent.dl.sourceforge.net/project/lzmautils/xz-5.2.1.tar.gz cd xdelta3/ ./generate_build_files.sh ./run_release.sh

some errors are fixed but for some reason it fails at build-lzma, (stderr says there are errors in the xz dependency ?)

Download the source from the ubuntu package and compile that instead... (Hey it works...) https://launchpad.net/ubuntu/+source/xdelta3/3.0.11-dfsg-1ubuntu1

Do the following:

wget https://launchpad.net/ubuntu/+archive/primary/+sourcefiles/xdelta3/3.0.11-dfsg-1ubuntu1/xdelta3_3.0.11-dfsg.orig.tar.xz tar -xf xdelta3_3.0.11-dfsg.orig.tar.xz cd xdelta3-3.0.11-dfsg ./configure make

Now use or move the xdelta3 file

Hi, mm, the idea is can compile the last version, 3.1, 3.0.11 still works, seems the problem (as someone say above), is missed the HAVE_CONFIG_H in gcc, is defined but for some reasson not passed...

The problem is the release3_1 branch is not frozen at the state of the actual release. It seems there is live development going on there and it's state is not really stable. Instead of cloning that one should be downloading the tagged release snapshot of the source.

In there there is no generate_build_files.sh. Apparently that came as part of new work after the actual release that is still unfinished. Looks like it needs #241 to compile but it is unknown whether that way of fixing it was the original authors intention.

So anyways, one has to get the zip with the source from the link above and then building is really simple. One just has to do:

autoreconf --install ./configure make

in the folder where the source resides. Also there is configure --help which is well written and lists all available options. Also, one can do make(space)(tab)(tab) on the command line to see all make options,

jmacd / xdelta

Unable to compile on Unbutu #235