search

jmcollin78 / versatile_thermostat

A full featured Thermostat for Home Assistant: presets, window, motion, presence and overpowering management
MIT License
327 stars 34 forks source link

Thermostat commands to heat despite target temperature exceeded #449

Closed Kriss1670 closed 7 months ago

Kriss1670 commented 7 months ago

As shown on screenshots, my thermostat commands heating despite target temperature exceeded. IMG_9212 I use a central configuration with default TPI values. Each radiator is commanded by a switch to send a signal to change from OFF or NORMAL (Fil pilote).

Kriss1670 commented 7 months ago

Doing some testing... maybe some automation interfering.

jmcollin78 commented 7 months ago

Hello @Kriss1670 ,

See in the Troubleshoot section of the readme. You will have some clues to troubleshoot this "common" case.

Kriss1670 commented 7 months ago

Hello,

Thanks for the answer but TPI parameters were default ones. Ther probably was an interaction with a forgotten automation. I deleted it (useless since Versatile thermostat deals with open windows) and reconfigure everything from scratch yesterday and it seems good since then. I close the issue.

Sorry for disturbing and thanks for your work.

De : Jean-Marc Collin @.> Envoyé : lundi 22 avril 2024 08:09 À : jmcollin78/versatile_thermostat @.> Cc : Kriss1670 @.>; Mention @.> Objet : Re: [jmcollin78/versatile_thermostat] Thermostat commands to heat despite target temperature exceeded (Issue #449)

Hello @Kriss1670https://github.com/Kriss1670 ,

See in the Troubleshoot section of the readme. You will have some clues to troubleshoot this "common" case.

— Reply to this email directly, view it on GitHubhttps://github.com/jmcollin78/versatile_thermostat/issues/449#issuecomment-2068562545, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ATIAUWLIEFTC6B55S7CSD7TY6SSQRAVCNFSM6AAAAABGQRMK32VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRYGU3DENJUGU. You are receiving this because you were mentioned.Message ID: @.***>