Zero after the decimal point

Versions

Home assistant 2024.11.2 Versatile Thermostat : 6.7.0

Configuration

My VTherm attributes are the following: hvac_modes:

heat
"off" min_temp: 7 max_temp: 35 target_temp_step: 0.1 preset_modes:
none
frost
eco
comfort
boost current_temperature: 18 temperature: 18 hvac_action: heating preset_mode: comfort is_on: true hvac_mode: heat type: null is_controlled_by_central_mode: false last_central_mode: null frost_temp: 13 eco_temp: 16 boost_temp: 19 comfort_temp: 18 frost_away_temp: 0 eco_away_temp: 0 boost_away_temp: 0 comfort_away_temp: 0 power_temp: null target_temperature_step: 0.1 ext_current_temperature: 10.3 ac_mode: false current_power: null current_power_max: null saved_preset_mode: comfort saved_target_temp: 18 saved_hvac_mode: null motion_sensor_entity_id: null motion_state: null power_sensor_entity_id: null max_power_sensor_entity_id: null overpowering_state: null presence_sensor_entity_id: null presence_state: null window_state: "off" window_auto_state: "off" window_bypass_state: false window_sensor_entity_id: null window_delay_sec: null window_auto_enabled: false window_auto_open_threshold: null window_auto_close_threshold: null window_auto_max_duration: null window_action: window_turn_off security_delay_min: 60 security_min_on_percent: 0.5 security_default_on_percent: 0.1 last_temperature_datetime: "2024-11-17T13:10:24.387282+01:00" last_ext_temperature_datetime: "2024-11-17T13:12:00.095014+01:00" security_state: false minimal_activation_delay_sec: 10 device_power: 1 mean_cycle_power: 0.15 total_energy: 5190.08 last_update_datetime: "2024-11-17T13:13:43.822810+01:00" timezone: Europe/Paris temperature_unit: °C is_device_active: true ema_temp: 18 is_used_by_central_boiler: false temperature_slope: 0 hvac_off_reason: null is_over_switch: true is_inversed: false keep_alive_sec: 0 underlying_entities:
switch.flush_pilot_5
switch.flush_pilot_4 on_percent: 0.15 power_percent: 15 on_time_sec: 46 off_time_sec: 253 cycle_min: 5 function: tpi tpi_coef_int: 0.6 tpi_coef_ext: 0.02 friendly_name: Thermostat - Salon supported_features: 401

Bug description

In thermostat configuration, when we want to modify value with decimals, zero cannot be entered immediately after the decimal point unless it is followed by an already existing digit. If you do so, the decimal point and decimals are erased. Only the units remain.

Replicating the bug

In example, to indicate 0.02

type 0.0
it deletes .0
only 0 is displayed

A way around the bug