search

jneilliii / OctoPrint-RTMPStreamer

22 stars 13 forks source link

Stream stops mid print #8

Closed Celtaa closed 4 years ago

Celtaa commented 6 years ago

Hi,

Today I configured the RTMPStreamer plugin. I followed the instructions, tested all ok, configured webcam with actual ip, configured plugin to start stream with print and as soon as I started printing the stream started. All went well for 40 minutes approximately but then the stream stopped, the print still continues and on the #tab_plugin_rtmpstreamer the button says "Stop". Any ideais on why it stopped? Don't know if is there a log I can look at. Thanks!

jneilliii commented 6 years ago

Nothing I can think of off the top of my head outside of possible network disconnects or just overall processing power. What model Pi are you running OctoPrint on?

Celtaa commented 6 years ago

I have a Pi 3 B+, don't know if there is a processing power there. Regarding the internet connection, I sometimes get disconnects, does the plugin try to reconnect or something? I'm using the pi with wifi and I was having and average of 683kbps

jneilliii commented 6 years ago

Pi 3 B+ should be fine. Just wasn't sure if you were using a single core Pi Zero W or something similar. I'm not really sure if it will reconnect or not, but you could press the stop button and then press the start button to reinitialize. Check to see if there are any errors in your octoprint.log too,

stale[bot] commented 4 years ago

This issue has been automatically marked as stale because it has not had activity in 14 days. It will be closed if no further activity occurs in 7 days.