[BUG] can't flash tft with latest Tasmota (14.2.0)

[mokkin]

I was not able to flash the tft file with the latest tasmota on the ns panel. After downgrading to tasmota 13.3 it worked as described in the documenation.

[joBr99]

I just tried with 14.1.0, can you confirm that this version is working?

https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin

[janprive]

I’m on 14.1.0 and used it to flash tft beta on my nspanels. All went fine!Groeten!Jan Boeren(Verstuurd vanaf mijn telefoon)Op 22 aug 2024 om 19:43 heeft Johannes @.***> het volgende geschreven: I just tried with 14.1.0, can you confirm that this version is working? https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

[sanderpqr]

I had the same issue, with Tasmota 14.2.0 I could not flash the Development panel firmware.

Tasmota console:

CMD: FlashNextion http://nspanel.pky.eu/lui.tft MQT: stat/nsptasmota/RESULT = {"FlashNextion":"Done"} FLH: host: nspanel.pky.eu, port: 80, get: /lui.tft FLH: Send (High Speed) flash start FLH: Something has gone wrong flashing display firmware [bytes('85')]

And the screen was stuck on:

USART Update... 921600 SIZE: 8373568 writing DATA....

[..............................]

Or, the console would report a successful flash, but then the screen would be stuck on:

Model does not match Device Model: NX4832F035_011C

However, after downgrading to 14.1.0 I could flash the Development TFT.

[LenoDuan]

I am not able to flash tft with latest version ,

05:38:58.481 FLH: host: nspanel.pky.eu, port: 80, get: /lui-release.tft 05:39:00.055 FLH: Send (High Speed) flash start 05:39:00.503 FLH: Something has gone wrong flashing display firmware [bytes('0A')]

the screen is freeze after display writing DATA

[joBr99]

Please downgrade to

https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin

[LenoDuan]

Please downgrade to

https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin

how can I downgrade,When I tried from the OTA firmware and input the source URL,it seems downgrade faild,should I use another solution?sorry it's my first time use tasmota

[janprive]

Download the bin file from the url and flash it local. Not ota.Groeten!Jan Boeren(Verstuurd vanaf mijn telefoon)Op 27 aug 2024 om 08:51 heeft LenoDuan @.***> het volgende geschreven:

Please downgrade to https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin

how can I downgrade,When I tried from the OTA firmware and input the source URL,it seems downgrade faild,should I use another solution?sorry it's my first time use tasmota

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

[LenoDuan]

Download the bin file from the url and flash it local. Not ota.Groeten!Jan Boeren(Verstuurd vanaf mijn telefoon)Op 27 aug 2024 om 08:51 heeft LenoDuan @.> het volgende geschreven: Please downgrade to https://ota.tasmota.com/tasmota32/release-14.1.0/tasmota32-nspanel.bin how can I downgrade,When I tried from the OTA firmware and input the source URL,it seems downgrade faild,should I use another solution?sorry it's my first time use tasmota —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.>

I tried to flash it,but unable to bootup(I am not sure,but no wifi hotspot)， I am only able to flash this bin file (https://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.factory.bin) and works properly,but not able to flash tft,with any else bin file,the nspanel is not able to find wifi hotspot