search

joBr99 / nspanel-lovelace-ui

Custom Firmware for NsPanel with the design of HomeAssistant's lovelace UI in mind, works with Tasmota.
GNU General Public License v3.0
895 stars 190 forks source link

temp up and down does not work in the themorstat page #61

Closed hatran0884 closed 2 years ago

hatran0884 commented 2 years ago

Hi, one more issue related to the temp control in the themorstat page. i actually can turn on or turn off or set modes but unable to increase the temp or descrease temp.

joBr99 commented 2 years ago

Will check later, might be broken with the latest update.

detlefh68 commented 2 years ago

Hi, I also installed my NSPanel with lovelace-ui and I'm totally hooked! Thank you for the great work! Unfortunately, setting the temperature in the ThermoCard doesn't work for me either. The value on the display changes, but the value is not changed in the HomeAssistant.

joBr99 commented 2 years ago

should be fixed with v1.7.3

hatran0884 commented 2 years ago

yes, i confirm that it has been fixed in 1.7.3, however i found that there are 02 temp sensors named: Analog Temp which shows 28.7 degree and ESP32 Temp which shows 41 degree. both 02 sensors show higher temp then the actual my room temp so they do not seem to be the ambient temp sensor. can i get the correct temp sensor to put into the themorstat page ?

joBr99 commented 2 years ago

you need to calibrate the ntc in tasmota, search for adcparam

https://community.home-assistant.io/t/sonoff-nspanel-smart-scene-wall-switch-by-itead-coming-soon-on-kickstarter/332962/102