v2268 does not read only from inside the model menu setup "custom functions"

[GoogleCodeExporter]

Which board (stock / gruvin9x / sky9x / Taranis) are you using?
SKY9X REVB
What is your openTx FW version?
2268
What is your openTx EEPROM version?
214
What steps will reproduce the problem?
1. TRY TO READ THE SD CARD FROM INSIDE THE MODEL MENU SETUP (custom functions) 
AND ASSIGN A WAV FILE TO A SWITCH. 
2.
3.

What is the expected output? What do you see instead?
Instead of reading and selecting a wav sound from the sd card when inside the 
custom functions menu in order to assign a wav sound to a 3 pos switch, the 
system responds with a message saying that the sd card contains no sounds
Please provide any additional information below.
I upgraded from version 2168 eeprom 214 and i noticed that the wav sounds when 
i move a switch or when i power up the tx were not played anymore.
Then i navigated inside the model menu setup (custom functions page) and i 
noticed that the system cannot read the sd card but when i entered the TX setup 
menu page #2 the sd card was perfectly read and i could play any wav inside it.
I also created a new model just to check if this will fix the problem but
the system exhibited the same behavior.

Original issue reported on code.google.com by hendri...@gmail.com on 14 Apr 2013 at 8:27

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Please delete my issue.
I found the answer in the forum but i didn;t noticed it because it was in 
French.
After reading it more carefully i remembered some French i took in my early 
school days and solved the problem.
Chris

Original comment by hendri...@gmail.com on 14 Apr 2013 at 9:33

[GoogleCodeExporter]

Original comment by romolo.m...@gmail.com on 14 Apr 2013 at 9:39

• Changed state: Invalid