modelnames does not fit to modelnumbers

[GoogleCodeExporter]

Which board (stock / gruvin9x / sky9x / Taranis) are you using?
stock

What is your openTx FW version?
r2281

What is your openTx EEPROM version?
213-1

What steps will reproduce the problem?
1. Activate model numbered > 7 
2. Go back to main screen
3. Call MODELSEL by pressing RIGHT [long] or MENU [long]

What is the expected output? What do you see instead?
Listed modelnames does not fit to modelnumbers. After a keypress the modelnames 
are sorted the right way.

Please provide any additional information below.
Same behavior in companions Tx-simulation (Ver 1.27 Rev 1834).

Original issue reported on code.google.com by Steinlau...@gmail.com on 15 May 2013 at 7:33

[GoogleCodeExporter]

Bertrand, this is exactly what I was describing to earlier. I didn't connect it 
to the fact that this happens when selecting a model number bigger than 7..
Here are some pictures.
Ahh, for example.. mz model number 6 is called "Buddy Box".. Sometimes appears 
doubled as number 9, but only the name.. If zou leave the menu and come back 
the problem is gone..

Original comment by joaoalve...@googlemail.com on 15 May 2013 at 11:08

Attachments:

• 160520132481.jpg
• 160520132482.jpg

[GoogleCodeExporter]

The first picture shows the normal numbering.. the second shows the mess.. 
buddy box should be number 6 but the name now shows on number 9. and number 6 
displays the ___CCC___ thingy. I have no model with that name :D

Original comment by joaoalve...@googlemail.com on 15 May 2013 at 11:11

[GoogleCodeExporter]

Reproduced on simu. Thanks for the detailed description of the steps to 
reproduce it!

Original comment by bson...@gmail.com on 16 May 2013 at 5:15

• Changed state: Started

[GoogleCodeExporter]

Original comment by bson...@gmail.com on 16 May 2013 at 1:10

• Changed state: Fixed

[GoogleCodeExporter]

Issue 32 has been merged into this issue.

Original comment by bson...@gmail.com on 16 May 2013 at 7:14