Closed cbeham closed 4 years ago
there is just no config file available for that address and it seems to be a bus coupler anyway, so the recommended way to get the device behind it accessible for now is to have another adapter connected to the second eBUS. alternatively, you could wait for https://github.com/john30/ebusd/issues/109 to be solved
Hello John,
this are my ebus-devices:
Vaillant VWF 117/4 VRC700 VR91 (Fernbedienung) RecoVair 360/4 E VR 920 (Internetmodul) vaillant VR70 (Mischermodul) + Pufferspeicher + 2 Heizkreise aguaFLOW exclusive VPM 30/35/2 (Trinkwasserstation)
there is no second ebus-koppler except the vaillant internet modul act like this?
But the main question is why the OTHER DEVICES are not been recognized by ebus?
since 1 day always the same output:
pi@raspberrypi001:~ $ ebusctl i version: ebusd 3.4.v3.4 update check: OK signal: acquired symbol rate: 23 max symbol rate: 72 min arbitration micros: 55 max arbitration micros: 85 min symbol latency: 8 max symbol latency: 9 reconnects: 0 masters: 3 messages: 13 conditional: 0 poll: 0 update: 4 address 00: master #1 address 31: master #8, ebusd address 33: master #13 address 36: slave #8, ebusd address 38: slave #13, scanned "MF=Vaillant;ID=V32;SW=0117;HW=9802"
Can you please help me!!! Thank you.
New Problem: [main error] unable to load scan config 38: no file from vaillant with prefix 38 found
ebusd on Pi3 esera Ebus ethernet adapter
Vaillant VWF 117/4 VRC700 VR91 (Fernbedienung) RecoVair 360/4 E VR 920 (Internetmodul) vaillant VR70 (Mischermodul) + Pufferspeicher + 2 Heizkreise aguaFLOW exclusive VPM 30/35/2 (Trinkwasserstation)
need help! thank you