VMS8D - AuroStep Plus (VIH250/4) - unknown device?

[Strobistar]

Hi all, new to eBusd, but curious to know what it can mean to my setup:

• Ecotec plus VCW376 (that is found within BAI)
• Aurostep plus VIH250 with VMS8D interior
• both interconnected on the ebus, but NO thermostat (only a basic on-off connected to the VCW)

Installed ebusd with USB adapter on a raspberry pi. Scanning results are:

ebusd -f -d /dev/ttyUSB0 --configpath=http://ebusd.eu/config/ --scanconfig=full --pollinterval=180

2019-12-06 18:16:06.298 [main notice] ebusd 3.4.v3.3-51-g57eae05 started with full scan 2019-12-06 18:16:06.531 [bus notice] bus started with own address 31/36 2019-12-06 18:16:06.552 [bus notice] signal acquired 2019-12-06 18:16:16.532 [main notice] starting initial full scan 2019-12-06 18:16:18.313 [bus notice] new master 01, master count 2 2019-12-06 18:16:18.314 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2019-12-06 18:16:18.314 [update notice] store 06 ident: done 2019-12-06 18:16:18.314 [update notice] sent scan-read scan.06 QQ=31: Vaillant;VMD01;0108;1703 2019-12-06 18:16:18.314 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2019-12-06 18:16:18.484 [bus notice] new master 03, master count 3 2019-12-06 18:16:18.485 [bus notice] scan 08: ;Vaillant;BAI00;0104;7803 2019-12-06 18:16:18.485 [update notice] store 08 ident: done 2019-12-06 18:16:18.485 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0104;7803 2019-12-06 18:16:18.485 [bus notice] scan 08: ;Vaillant;BAI00;0104;7803 2019-12-06 18:16:22.219 [main error] unable to load scan config 06: no file from vaillant with prefix 06 matches ID "vmd01", SW0108, HW1703 2019-12-06 18:16:22.219 [main error] scan config 06: ERR: element not found 2019-12-06 18:16:24.800 [main notice] read common config file vaillant/scan.csv 2019-12-06 18:16:24.858 [main notice] read common config file vaillant/general.csv 2019-12-06 18:16:24.917 [main notice] read common config file vaillant/broadcast.csv 2019-12-06 18:16:24.978 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0104, HW7803 2019-12-06 18:16:25.742 [update notice] sent scan-read scan.08 id QQ=31: 2019-12-06 18:16:26.459 [update notice] sent scan-read scan.08 id QQ=31: 2019-12-06 18:16:27.176 [update notice] sent scan-read scan.08 id QQ=31: 2019-12-06 18:16:27.895 [update notice] sent scan-read scan.08 id QQ=31: 21;18;07;0010021845;1300;257184;N9 2019-12-06 18:16:28.148 [main notice] found messages: 211 (3 conditional on 25 conditions, 0 poll, 9 update) 2019-12-06 18:16:29.178 [update notice] sent scan-read scan.08 id QQ=31: 21;18;07;0010021845;1300;257184;N9 2019-12-06 18:16:29.900 [update notice] sent scan-read scan.08 id QQ=31: 21;18;07;0010021845;1300;257184;N9 2019-12-06 18:16:30.618 [update notice] sent scan-read scan.08 id QQ=31: 21;18;07;0010021845;1300;257184;N9 2019-12-06 18:16:31.333 [update notice] sent scan-read scan.08 id QQ=31: 21;18;07;0010021845;1300;257184;N9 2019-12-06 18:16:31.333 [bus notice] scan 08: ;21;18;07;0010021845;1300;257184;N9 2019-12-06 18:18:14.641 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2019-12-06 18:18:14.641 [update notice] store ed ident: done 2019-12-06 18:18:14.641 [update notice] sent scan-read scan.ed QQ=31: Vaillant;VMD01;0108;1703 2019-12-06 18:18:14.641 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2019-12-06 18:18:23.480 [update notice] sent unknown MS cmd: 31edb5090124 / 09003231313832303030 2019-12-06 18:18:23.666 [update notice] sent scan-read scan.ed id QQ=31: 2019-12-06 18:18:23.853 [update notice] sent scan-read scan.ed id QQ=31: 2019-12-06 18:18:24.038 [update notice] sent scan-read scan.ed id QQ=31: 21;18;20;0010017717;3110;004422;N2 2019-12-06 18:18:24.038 [bus notice] scan ed: ;21;18;20;0010017717;3110;004422;N2 2019-12-06 18:18:24.097 [main error] unable to load scan config ed: no file from vaillant with prefix ed matches ID "vmd01", SW0108, HW1703 2019-12-06 18:18:24.097 [main error] scan config ed: ERR: element not found 2019-12-06 18:20:26.159 [main notice] update check: revision v3.4 available

ebusd command line gives:

ebusctl i version: ebusd 3.4.v3.3-51-g57eae05 update check: revision v3.4 available signal: acquired symbol rate: 23 max symbol rate: 86 min arbitration micros: 721 max arbitration micros: 977 min symbol latency: 5 max symbol latency: 14 reconnects: 0 masters: 3 messages: 213 conditional: 3 poll: 0 update: 9 address 01: master #6 address 03: master #11 address 06: slave #6, scanned "MF=Vaillant;ID=VMD01;SW=0108;HW=1703" address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0104;HW=7803", loaded "vaillant/bai.308523.inc", "vaillant/08.bai.csv" address 31: master #8, ebusd address 36: slave #8, ebusd address ed: slave, scanned "MF=Vaillant;ID=VMD01;SW=0108;HW=1703"

ebusctl find -d scan.06 = Vaillant;VMD01;0108;1703 scan.08 = Vaillant;BAI00;0104;7803 scan.08 id = 21;18;07;0010021845;1300;257184;N9

I can read some stuff:

ebusctl read -V flame bai Flame =off [Flammensignal]

But when using hot water (with solar boiler under threshold temperature), the flame remained off whilst the VCW was actively heating the water.

Other commands are failing:

ebusctl read time ERR: element not found

So my questions are:

• is this solar boiler (VMS) not available hence I cannot query it?
• is a (vaillant) thermostat a required element on the ebus before you can query stuff from the VCW?
• can I "promote" the ebus USB connector as a "real" vaillant thermostat so the VCW actually talks to it?

Thanks for your feedback!

[Strobistar]

Hello Was,

if I run an "ebusctl info" against my working environment, I get this:

@.***:~# ebusctl info version: ebusd 22.3.p20220508 update check: version 23.1 available, broadcast.csv: different version available, memory.csv: different version available, vaillant/08.bai.csv: newer version available, vaillant/15.700.csv: newer version available, vaillant/bai.308523.inc: different version available, vaillant/broadcast.csv: different version available, vaillant/ec.sol.sc.csv: different version available, vaillant/errors.inc: different version available, vaillant/general.csv: different version available, vaillant/hcmode.inc: different version available, vaillant/iotestbsol.inc: different version available, vaillant/yield3f40.inc: different version available device: /dev/ttyUSB1 signal: acquired symbol rate: 124 max symbol rate: 526 min arbitration micros: 311 max arbitration micros: 8980 min symbol latency: 0 max symbol latency: 29 reconnects: 1 masters: 5 messages: 800 conditional: 3 poll: 1 update: 10 address 01: master #6 address 03: master #11 address 06: slave #6, scanned "MF=Vaillant;ID=VMD01;SW=0108;HW=1703", loaded "vaillant/06.vmd.csv" address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0104;HW=7803", loaded "vaillant/bai.308523.inc", "vaillant/08.bai.csv" address 10: master #2 address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0614;HW=6903", loaded "vaillant/15.700.csv" address 30: master #3 address 31: master #8, ebusd address 35: slave #3, scanned "MF=Vaillant;ID=VR_91;SW=0415;HW=4803" address 36: slave #8, ebusd address 52: slave, scanned "MF=Vaillant;ID=VR_70;SW=0109;HW=2903", loaded "vaillant/52.vr_70.csv" address ec: slave, scanned "MF=Vaillant;ID=SOL00;SW=0614;HW=6903", loaded "vaillant/ec.sol.sc.csv" address ed: slave, scanned "MF=Vaillant;ID=VMD01;SW=0108;HW=1703"

So aside I'm running a bit behind, you got almost the same setup as I have, except you got an "ed.xxx.csv" loaded for the VMD01 (your last line), and I haven't one.

Keep in mind that I still run on a "forked" git repository (which did not contain a working "06.vmd.csv", hence I replicated (back in the days) all the csv, and I manually copied over 06.pms.csv to 06.vmd.csv which still works till this day...

eg: 2023-01-21 16:37:55.274 [update notice] sent read vmd SolPumpPower QQ=31: 0 2023-01-21 16:37:55.484 [update notice] sent read bai extWP QQ=31: off 2023-01-21 16:37:55.675 [update notice] sent read bai Flame QQ=31: off 2023-01-21 16:37:55.844 [update notice] sent read vmd Ntc1Sensor QQ=31: 15.06;ok 2023-01-21 16:37:56.036 [update notice] sent read vmd Ntc3Sensor QQ=31: 23.81;ok 2023-01-21 16:37:56.227 [update notice] sent read vmd Ntc5Sensor QQ=31: 22.06;ok 2023-01-21 16:37:56.420 [update notice] sent read vmd Ntc6Sensor QQ=31: 19.25;ok 2023-01-21 16:37:56.662 [update notice] sent read 700 DisplayedOutsideTemp QQ=31: 1.0625 2023-01-21 16:37:56.897 [update notice] sent read 700 z1RoomTemp QQ=31: 18.5625 2023-01-21 16:37:57.118 [update notice] sent read 700 z2RoomTemp QQ=31: 19.0625 2023-01-21 16:37:57.351 [update notice] sent read 700 Hc1MixerMovement QQ=31: -100 2023-01-21 16:37:57.570 [update notice] sent read 700 Hc2MixerMovement QQ=31: -100 2023-01-21 16:37:57.794 [update notice] sent read 700 z1ValveStatus QQ=31: 0 2023-01-21 16:37:57.972 [update notice] sent read 700 z2ValveStatus QQ=31: 0 2023-01-21 16:37:58.162 [update notice] sent read bai CirPump QQ=31: off

Good luck! S.

On Fri, Jan 20, 2023 at 3:35 PM Wassman2020 @.***> wrote:

Hi all, New to eBusd We have Ecotec plus, Aurostep plus VIH250 with VMS8D interior both interconnected on the ebus, and thermostat new to eBusd, I have read the entire thread and followed the instructions of @pagaille https://github.com/pagaille @Strobistar https://github.com/Strobistar and @john30 https://github.com/john30 to load the cvs of @pagaille https://github.com/pagaille. Ebusd load all Csv correctly. [image: image] https://user-images.githubusercontent.com/101360964/213723123-f744bdd3-5c72-4c85-a74f-dce923912584.png [image: image] https://user-images.githubusercontent.com/101360964/213723266-4c99169c-98fd-473c-bfbd-8c07a18b5466.png

But for VMS8D only detect PowerOnCounter, the rest os sensor not are detected. What could be the problem?power

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1398477159, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM65FXY7HK6MWJPMT6C3WTKPBXANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[pagaille]

I would not load the driver for both 06 and ed adresses. From my own experience the vmd exposes those adresses but both are reporting exactly the same data.

So just delete ed.vmd.csv and try again.

Beside this, having three devices on the ebus may allow us to discover new properties (registers) by observing the dialog between them. The grab tool could be used for that.

[Wassman2020]

I have deleted the file corresponding to the ed device and I have tried with the 06.vmd of @pagaille and also replaced 06.vmd with the original 06.pmd with the data from VMD01. When doing the scan located the devices.

And upload the CSV files.

But I let a couple of hours go by and it doesn't find any VMD01 sensor. Only detect sensor of 700, bai and VR70 700 AdaptHeatCurve = no 700 BankHolidayEndPeriod = no data stored 700 BankHolidayStartPeriod = no data stored 700 ccTimer.Friday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Saturday = 07:30;23:30;-:-;-:-;-:-;-:- 700 ccTimer.Sunday = 07:30;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Thursday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Tuesday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Wednesday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ContinuosHeating = no data stored 700 currenterror = -;-;-;-;- 700 CylinderChargeHyst = no data stored 700 CylinderChargeOffset = no data stored 700 Date = 24.01.2023 700 DisplayedOutsideTemp = 8.8125 700 errorhistory = no data stored 700 FrostOverRideTime = no data stored 700 GlobalSystemOff = no 700 Hc1ActualFlowTempDesired = 0.0 700 Hc1AutoOffMode = night 700 Hc1CircuitType = mixer 700 Hc1ExcessTemp = 0.0 700 Hc1FlowTemp = 15.5 700 Hc1HeatCurve = 4 700 Hc1HeatCurveAdaption = 0.0 700 Hc1MaxFlowTempDesired = 75 700 Hc1MinFlowTempDesired = 30 700 Hc1MixerMovement = no data stored 700 Hc1PumpStatus = 0 700 Hc1RoomTempSwitchOn = thermostat 700 Hc1Status = 0 700 Hc1SummerTempLimit = 25 700 Hc2ActualFlowTempDesired = 0.0 700 Hc2AutoOffMode = night 700 Hc2CircuitType = mixer 700 Hc2ExcessTemp = 0.0 700 Hc2FlowTemp = 19.875 700 Hc2HeatCurve = 4 700 Hc2HeatCurveAdaption = 0.0 700 Hc2MaxFlowTempDesired = 75 700 Hc2MinFlowTempDesired = 30 700 Hc2MixerMovement = no data stored 700 Hc2PumpStatus = 0 700 Hc2RoomTempSwitchOn = thermostat 700 Hc2Status = 0 700 Hc2SummerTempLimit = 25 700 Hc3ActualFlowTempDesired = 0.0 700 Hc3AutoOffMode = eco 700 Hc3CircuitType = no data stored 700 Hc3ExcessTemp = 0.0 700 Hc3FlowTemp = - 700 Hc3HeatCurve = 1.2 700 Hc3HeatCurveAdaption = 0.0 700 Hc3MaxFlowTempDesired = 90 700 Hc3MinFlowTempDesired = 15 700 Hc3MixerMovement = no data stored 700 Hc3PumpStatus = 0 700 Hc3RoomTempSwitchOn = off 700 Hc3Status = 0 700 Hc3SummerTempLimit = 21 700 HcStorageTempBottom = - 700 HcStorageTempTop = - 700 HolidayEndPeriod = 01.01.2015 700 HolidayStartPeriod = 01.01.2015 700 HolidayTemp = 5 700 HwcBankHolidayEndPeriod = no data stored 700 HwcBankHolidayStartPeriod = no data stored 700 HwcFlowTemp = 0.0 700 HwcHolidayEndPeriod = no data stored 700 HwcHolidayStartPeriod = no data stored 700 HwcLockTime = no data stored 700 HwcMaxFlowTempDesired = 80 700 HwcOpMode = auto 700 HwcParallelLoading = no data stored 700 HwcSFMode = auto 700 HwcStorageTemp = 18.5 700 HwcStorageTempBottom = - 700 HwcStorageTempTop = - 700 HwcTempDesired = 65 700 hwcTimer.Friday = 06:00;07:30;-:-;-:-;-:-;-:- 700 hwcTimer.Monday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Saturday = -:-;-:-;-:-;-:-;-:-;-:- 700 hwcTimer.Sunday = -:-;-:-;-:-;-:-;-:-;-:- 700 hwcTimer.Thursday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Tuesday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Wednesday = 06:00;07:30;20:00;20:40;00:00;00:00 700 HydraulicScheme = no data stored 700 Installer1 = no data stored 700 Installer2 = no data stored 700 KeyCodeforConfigMenu = no data stored 700 MaintenanceDate = no data stored 700 MaintenanceDue = no data stored 700 ManualCooling = 0 700 MaxCylinderChargeTime = no data stored 700 MaxRoomHumidity = no data stored 700 MultiRelaySetting = no data stored 700 noiseReductionTimer.Friday = no data stored 700 noiseReductionTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 noiseReductionTimer.Saturday = no data stored 700 noiseReductionTimer.Sunday = no data stored 700 noiseReductionTimer.Thursday = no data stored 700 noiseReductionTimer.Tuesday = no data stored 700 noiseReductionTimer.Wednesday = no data stored 700 OpMode = off 700 OpModeCooling = auto 700 OpModeEffect = 2 700 OpModeVentilation = auto 700 OutsideTempAvg = 7.25781 700 PhoneNumber1 = no data stored 700 PhoneNumber2 = no data stored 700 PrEnergySum = 15 700 PrEnergySumHc = 15 700 PrEnergySumHcLastMonth = 0 700 PrEnergySumHcThisMonth = 0 700 PrEnergySumHwc = 0 700 PrEnergySumHwcLastMonth = 0 700 PrEnergySumHwcThisMonth = 0 700 PrFuelSum = no data stored 700 PrFuelSumHc = no data stored 700 PrFuelSumHcLastMonth = no data stored 700 PrFuelSumHcThisMonth = no data stored 700 PrFuelSumHwc = no data stored 700 PrFuelSumHwcLastMonth = no data stored 700 PrFuelSumHwcThisMonth = no data stored 700 PumpAdditionalTime = no data stored 700 SFMode = auto 700 SolarYieldTotal = 0 700 SystemFlowTemp = 15.5 700 tariffTimer.Friday = no data stored 700 tariffTimer.Monday = no data stored 700 tariffTimer.Saturday = no data stored 700 tariffTimer.Sunday = no data stored 700 tariffTimer.Thursday = no data stored 700 tariffTimer.Tuesday = no data stored 700 tariffTimer.Wednesday = no data stored 700 Time = 15:46:00 700 VentilationDay = 0 700 VentilationNight = 0 700 ventilationTimer.Friday = no data stored 700 ventilationTimer.Monday = no data stored 700 ventilationTimer.Saturday = no data stored 700 ventilationTimer.Sunday = no data stored 700 ventilationTimer.Thursday = no data stored 700 ventilationTimer.Tuesday = no data stored 700 ventilationTimer.Wednesday = no data stored 700 WaterPressure = 1 700 YieldTotal = 0 700 z1ActualRoomTempDesired = 18.5 700 z1BankHolidayEndPeriod = no data stored 700 z1BankHolidayStartPeriod = no data stored 700 z1CoolingTemp = 24 700 z1CoolingTimer.Friday = no data stored 700 z1CoolingTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 z1CoolingTimer.Saturday = no data stored 700 z1CoolingTimer.Sunday = no data stored 700 z1CoolingTimer.Thursday = no data stored 700 z1CoolingTimer.Tuesday = no data stored 700 z1CoolingTimer.Wednesday = no data stored 700 z1DayTemp = 22 700 z1HolidayEndPeriod = no data stored 700 z1HolidayStartPeriod = no data stored 700 z1HolidayTemp = 5 700 z1Name1 = PLANT 700 z1Name2 = A 2
700 z1NightTemp = 18.5 700 z1OpMode = night 700 z1OpModeCooling = auto 700 z1QuickVetoTemp = 26 700 z1RoomTemp = 21.8125 700 z1RoomZoneMapping = no data stored 700 z1SFMode = auto 700 z1Shortname = no data stored 700 z1Timer.Friday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Monday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Saturday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Sunday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Thursday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Tuesday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Wednesday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1ValveStatus = 0 700 z2ActualRoomTempDesired = 5 700 z2BankHolidayEndPeriod = no data stored 700 z2BankHolidayStartPeriod = no data stored 700 z2CoolingTemp = 24 700 z2CoolingTimer.Friday = no data stored 700 z2CoolingTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 z2CoolingTimer.Saturday = no data stored 700 z2CoolingTimer.Sunday = no data stored 700 z2CoolingTimer.Thursday = no data stored 700 z2CoolingTimer.Tuesday = no data stored 700 z2CoolingTimer.Wednesday = no data stored 700 z2DayTemp = 22 700 z2HolidayEndPeriod = no data stored 700 z2HolidayStartPeriod = no data stored 700 z2HolidayTemp = 5 700 z2Name1 = PLANT 700 z2Name2 = A 1
700 z2NightTemp = 18.5 700 z2OpMode = off 700 z2OpModeCooling = auto 700 z2QuickVetoTemp = 23 700 z2RoomTemp = 21.375 700 z2RoomZoneMapping = no data stored 700 z2SFMode = auto 700 z2Shortname = no data stored 700 z2Timer.Friday = 17:30;23:30;00:00;00:00;00:00;00:00 700 z2Timer.Monday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Saturday = 11:00;-:-;00:00;00:00;00:00;00:00 700 z2Timer.Sunday = 11:00;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Thursday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Tuesday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Wednesday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2ValveStatus = 0 700 z3ActualRoomTempDesired = 0.0 700 z3BankHolidayEndPeriod = no data stored 700 z3BankHolidayStartPeriod = no data stored 700 z3CoolingTemp = 24 700 z3DayTemp = 20 700 z3HolidayEndPeriod = no data stored 700 z3HolidayStartPeriod = no data stored 700 z3HolidayTemp = 5 700 z3Name1 = no data stored 700 z3Name2 = no data stored 700 z3NightTemp = 15 700 z3OpMode = auto 700 z3OpModeCooling = auto 700 z3QuickVetoTemp = 21 700 z3RoomTemp = - 700 z3RoomZoneMapping = no data stored 700 z3SFMode = auto 700 z3Shortname = no data stored 700 z3ValveStatus = 0 bai AccessoriesOne = no data stored bai AccessoriesTwo = no data stored bai AntiCondensValue = no data stored bai averageIgnitiontime = no data stored bai BlockTimeHcMax = no data stored bai BoilerType = no data stored bai ChangesDSN = no data stored bai CirPump = no data stored bai CodingResistor = no data stored bai CounterStartattempts1 = 177 bai CounterStartattempts2 = 14 bai CounterStartAttempts3 = 1 bai CounterStartAttempts4 = 0 bai currenterror = -;-;-;-;- bai DateTime = nosignal;-:-:-;-.-.-;8.812 bai dcfState = no data stored bai DCFTimeDate = no data stored bai DCRoomthermostat = no data stored bai DeactivationsIFC = no data stored bai DeactivationsTemplimiter = 0 bai DeltaFlowReturnMax = no data stored bai DisplayMode = 2 bai DSN = no data stored bai DSNOffset = no data stored bai DSNStart = no data stored bai EbusSourceOn = no data stored bai EbusVoltage = no data stored bai errorhistory = no data stored bai ExternalFaultmessage = no data stored bai externalHwcSwitch = no data stored bai ExternGasvalve = no data stored bai ExtFlowTempDesiredMin = 40.00 bai ExtStorageModulCon = no data stored bai extWP = no data stored bai FanHours = 787 bai FanMaxSpeedOperation = no data stored bai FanMinSpeedOperation = no data stored bai FanPWMSum = no data stored bai FanPWMTest = no data stored bai FanSpeed = no data stored bai FanSpeedOffsetMax = no data stored bai FanSpeedOffsetMin = no data stored bai FanStarts = 24396 bai Flame = no data stored bai FlameSensingASIC = no data stored bai FloorHeatingContact = no data stored bai FlowsetHcMax = no data stored bai FlowsetHwcMax = no data stored bai FlowTemp = 18.69;ok bai FlowTempDesired = 0.00 bai FlowTempMax = 87.44 bai Fluegasvalve = no data stored bai FluegasvalveOpen = no data stored bai Gasvalve3UC = no data stored bai GasvalveASICFeedback = no data stored bai GasvalveUC = no data stored bai GasvalveUCFeedback = no data stored bai HcHours = 610 bai HcPumpMode = 3 bai HcPumpStarts = 10264 bai HcStarts = 1300 bai HcUnderHundredStarts = 11 bai HeatingSwitch = no data stored bai HoursTillService = - bai HwcDemand = no data stored bai HwcHours = 96 bai HwcImpellorSwitch = no data stored bai HwcStarts = 15900 bai HwcSwitch = no data stored bai HwcTemp = -13.50;cutoff bai HwcTempMax = 65.00 bai HwcTypes = no data stored bai HwcUnderHundredStarts = 26 bai HwcWaterflowMax = no data stored bai Ignitor = no data stored bai InitialisationEEPROM = no data stored bai IonisationVoltageLevel = no data stored bai maintenancedata_HwcTempMax = 0.00 bai maxIgnitiontime = no data stored bai minIgnitiontime = no data stored bai ModulationTempDesired = 81.7 bai OptionalRelais = no data stored bai OutdoorstempSensor = 8.81;ok bai OverflowCounter = yes bai ParamToken = no data stored bai PartloadHcKW = no data stored bai PartnumberBox = no data stored bai PositionValveSet = no data stored bai PowerValue = 16 06 56 18 64 1c bai PrAPSCounter = 0 bai PrAPSSum = no data stored bai PrEnergyCountHc1 = 2361718 bai PrEnergyCountHc2 = 0 bai PrEnergyCountHc3 = 0 bai PrEnergyCountHwc1 = 677538 bai PrEnergyCountHwc2 = 0 bai PrEnergyCountHwc3 = 0 bai PrEnergySumHc1 = 736035015 bai PrEnergySumHc2 = 0 bai PrEnergySumHc3 = 0 bai PrEnergySumHwc1 = 254615672 bai PrEnergySumHwc2 = 0 bai PrEnergySumHwc3 = 0 bai PrimaryCircuitFlowrate = no data stored bai ProductionByte = no data stored bai PrVortexFlowSensorValue = 0 bai PumpHours = 1020 bai PumpHwcFlowNumber = no data stored bai PumpHwcFlowSum = no data stored bai PumpPower = 0 bai PumpPowerDesired = auto bai RemainingBoilerblocktime = no data stored bai ReturnRegulation = no data stored bai ReturnTemp = 19.25;65227;ok bai ReturnTempExternal = -1.81;cutoff bai ReturnTempMax = 88.31 bai SerialNumber = no data stored bai SetFactoryValues = no data stored bai SetMode = auto;0.0;-;-;1;0;1;0;0;0 bai SHEMaxDeltaHwcFlow = no data stored bai SHEMaxFlowTemp = 0.00 bai Statenumber = no data stored bai Status01 = 18.5;18.5;8.812;-;18.5;off bai Status02 = on;60;75.0;70;65.0 bai Status16 = (ERR: invalid position for 3108b5040116 / 00) bai Status = (ERR: invalid position for 3108b5110103 / 00) bai StatusCirPump = on bai StorageDelay = no data stored bai StorageExitTemp = 116.06;circuit bai Storageloadpump = no data stored bai StorageLoadPumpHours = 299 bai StorageloadPumpStarts = 7549 bai StorageLoadTimeMax = no data stored bai StorageTemp = 19.25;ok bai StorageTempDesired = 55.00 bai StorageTempMax = 78.12 bai TargetFanSpeed = no data stored bai TargetFanSpeedOutput = no data stored bai TempDiffBlock = 0 bai TempDiffFailure = 0 bai TempGradientFailure = 0 bai Templimiter = off bai TemplimiterWithNTC = yes bai TempMaxDiffExtTFT = 0.00 bai Testbyte = no data stored bai TimerInputHc = no data stored bai ValveStarts = 4772 bai VolatileLockout = no data stored bai VolatileLockoutIFCGV = no data stored bai WarmstartDemand = no data stored bai WaterHcFlowMax = no data stored bai WaterPressure = no data stored bai WaterpressureBranchControlOff = no data stored bai WaterpressureMeasureCounter = 87 bai WaterpressureVariantSum = no data stored bai WP = no data stored bai WPPostrunTime = 5 bai WPSecondStage = no data stored broadcast datetime = no data stored broadcast error = no data stored broadcast hwcStatus = no data stored broadcast id = no data stored broadcast id = no data stored broadcast load = no data stored broadcast outsidetemp = 8.812 broadcast signoflife = no data stored broadcast vdatetime = 15:46:10;24.01.2023 general valuerange = no data stored memory eeprom = no data stored memory ram = no data stored scan id = no data stored scan.05 = Vaillant;VR920;2706;5703 scan.06 = Vaillant;VMD01;0108;1703 scan.06 id = 21;19;13;0010017718;3110;002717;N6 scan.08 = Vaillant;BAI00;0205;9602 scan.08 id = 21;19;19;0010021819;0001;005340;N4 scan.15 = Vaillant;70000;0613;6903 scan.15 id = 21;19;02;0020171318;0082;005145;N5 scan.35 = Vaillant;VR_91;0415;4803 scan.35 id = 21;19;09;0020171335;0082;005106;N5 scan.52 = Vaillant;VR_70;0109;2903 scan.52 id = 21;18;50;00????????;????;??????;?5 scan.ed = Vaillant;VMD01;0108;1703 scan.ed id = 21;19;13;0010017718;3110;002717;N6 vr_70 currenterror = -;-;-;-;- vr_70 errorhistory = no data stored vr_70 SensorData = -;-;-;-;15.31;19.94;c8 7d 00

I have looked for messages without being able to interpret, but there are no messages from unit 06.

Would it be possible to send a hexadecimal string to the bus in order to read any of the VMD01 sensors and see if they respond?

[Strobistar]

Can you show your full ebusd startup cmd line with parameters ? Did you issue a full scan?

Op di 24 jan. 2023 om 16:25 schreef Wassman2020 @.***>

I have deleted the file corresponding to the ed device and I have tried with the 06.vmd of @pagaille https://github.com/pagaille and also replaced 06.vmd with the original 06.pmd with the data from VMD01. When doing the scan located the devices. [image: image] https://user-images.githubusercontent.com/101360964/214334844-d73b059c-170a-4ada-b5b1-8a28746d4328.png

And upload the CSV files. [image: image] https://user-images.githubusercontent.com/101360964/214334916-285758f5-66e6-4317-8980-e6a95987358a.png

But I let a couple of hours go by and it doesn't find any VMD01 sensor. Only detect sensor of 700, bai and VR70 700 AdaptHeatCurve = no 700 BankHolidayEndPeriod = no data stored 700 BankHolidayStartPeriod = no data stored 700 ccTimer.Friday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Saturday = 07:30;23:30;-:-;-:-;-:-;-:- 700 ccTimer.Sunday = 07:30;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Thursday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Tuesday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ccTimer.Wednesday = 06:00;22:00;-:-;-:-;-:-;-:- 700 ContinuosHeating = no data stored 700 currenterror = -;-;-;-;- 700 CylinderChargeHyst = no data stored 700 CylinderChargeOffset = no data stored 700 Date = 24.01.2023 700 DisplayedOutsideTemp = 8.8125 700 errorhistory = no data stored 700 FrostOverRideTime = no data stored 700 GlobalSystemOff = no 700 Hc1ActualFlowTempDesired = 0.0 700 Hc1AutoOffMode = night 700 Hc1CircuitType = mixer 700 Hc1ExcessTemp = 0.0 700 Hc1FlowTemp = 15.5 700 Hc1HeatCurve = 4 700 Hc1HeatCurveAdaption = 0.0 700 Hc1MaxFlowTempDesired = 75 700 Hc1MinFlowTempDesired = 30 700 Hc1MixerMovement = no data stored 700 Hc1PumpStatus = 0 700 Hc1RoomTempSwitchOn = thermostat 700 Hc1Status = 0 700 Hc1SummerTempLimit = 25 700 Hc2ActualFlowTempDesired = 0.0 700 Hc2AutoOffMode = night 700 Hc2CircuitType = mixer 700 Hc2ExcessTemp = 0.0 700 Hc2FlowTemp = 19.875 700 Hc2HeatCurve = 4 700 Hc2HeatCurveAdaption = 0.0 700 Hc2MaxFlowTempDesired = 75 700 Hc2MinFlowTempDesired = 30 700 Hc2MixerMovement = no data stored 700 Hc2PumpStatus = 0 700 Hc2RoomTempSwitchOn = thermostat 700 Hc2Status = 0 700 Hc2SummerTempLimit = 25 700 Hc3ActualFlowTempDesired = 0.0 700 Hc3AutoOffMode = eco 700 Hc3CircuitType = no data stored 700 Hc3ExcessTemp = 0.0 700 Hc3FlowTemp = - 700 Hc3HeatCurve = 1.2 700 Hc3HeatCurveAdaption = 0.0 700 Hc3MaxFlowTempDesired = 90 700 Hc3MinFlowTempDesired = 15 700 Hc3MixerMovement = no data stored 700 Hc3PumpStatus = 0 700 Hc3RoomTempSwitchOn = off 700 Hc3Status = 0 700 Hc3SummerTempLimit = 21 700 HcStorageTempBottom = - 700 HcStorageTempTop = - 700 HolidayEndPeriod = 01.01.2015 700 HolidayStartPeriod = 01.01.2015 700 HolidayTemp = 5 700 HwcBankHolidayEndPeriod = no data stored 700 HwcBankHolidayStartPeriod = no data stored 700 HwcFlowTemp = 0.0 700 HwcHolidayEndPeriod = no data stored 700 HwcHolidayStartPeriod = no data stored 700 HwcLockTime = no data stored 700 HwcMaxFlowTempDesired = 80 700 HwcOpMode = auto 700 HwcParallelLoading = no data stored 700 HwcSFMode = auto 700 HwcStorageTemp = 18.5 700 HwcStorageTempBottom = - 700 HwcStorageTempTop = - 700 HwcTempDesired = 65 700 hwcTimer.Friday = 06:00;07:30;-:-;-:-;-:-;-:- 700 hwcTimer.Monday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Saturday = -:-;-:-;-:-;-:-;-:-;-:- 700 hwcTimer.Sunday = -:-;-:-;-:-;-:-;-:-;-:- 700 hwcTimer.Thursday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Tuesday = 06:00;07:30;20:00;20:40;00:00;00:00 700 hwcTimer.Wednesday = 06:00;07:30;20:00;20:40;00:00;00:00 700 HydraulicScheme = no data stored 700 Installer1 = no data stored 700 Installer2 = no data stored 700 KeyCodeforConfigMenu = no data stored 700 MaintenanceDate = no data stored 700 MaintenanceDue = no data stored 700 ManualCooling = 0 700 MaxCylinderChargeTime = no data stored 700 MaxRoomHumidity = no data stored 700 MultiRelaySetting = no data stored 700 noiseReductionTimer.Friday = no data stored 700 noiseReductionTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 noiseReductionTimer.Saturday = no data stored 700 noiseReductionTimer.Sunday = no data stored 700 noiseReductionTimer.Thursday = no data stored 700 noiseReductionTimer.Tuesday = no data stored 700 noiseReductionTimer.Wednesday = no data stored 700 OpMode = off 700 OpModeCooling = auto 700 OpModeEffect = 2 700 OpModeVentilation = auto 700 OutsideTempAvg = 7.25781 700 PhoneNumber1 = no data stored 700 PhoneNumber2 = no data stored 700 PrEnergySum = 15 700 PrEnergySumHc = 15 700 PrEnergySumHcLastMonth = 0 700 PrEnergySumHcThisMonth = 0 700 PrEnergySumHwc = 0 700 PrEnergySumHwcLastMonth = 0 700 PrEnergySumHwcThisMonth = 0 700 PrFuelSum = no data stored 700 PrFuelSumHc = no data stored 700 PrFuelSumHcLastMonth = no data stored 700 PrFuelSumHcThisMonth = no data stored 700 PrFuelSumHwc = no data stored 700 PrFuelSumHwcLastMonth = no data stored 700 PrFuelSumHwcThisMonth = no data stored 700 PumpAdditionalTime = no data stored 700 SFMode = auto 700 SolarYieldTotal = 0 700 SystemFlowTemp = 15.5 700 tariffTimer.Friday = no data stored 700 tariffTimer.Monday = no data stored 700 tariffTimer.Saturday = no data stored 700 tariffTimer.Sunday = no data stored 700 tariffTimer.Thursday = no data stored 700 tariffTimer.Tuesday = no data stored 700 tariffTimer.Wednesday = no data stored 700 Time = 15:46:00 700 VentilationDay = 0 700 VentilationNight = 0 700 ventilationTimer.Friday = no data stored 700 ventilationTimer.Monday = no data stored 700 ventilationTimer.Saturday = no data stored 700 ventilationTimer.Sunday = no data stored 700 ventilationTimer.Thursday = no data stored 700 ventilationTimer.Tuesday = no data stored 700 ventilationTimer.Wednesday = no data stored 700 WaterPressure = 1 700 YieldTotal = 0 700 z1ActualRoomTempDesired = 18.5 700 z1BankHolidayEndPeriod = no data stored 700 z1BankHolidayStartPeriod = no data stored 700 z1CoolingTemp = 24 700 z1CoolingTimer.Friday = no data stored 700 z1CoolingTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 z1CoolingTimer.Saturday = no data stored 700 z1CoolingTimer.Sunday = no data stored 700 z1CoolingTimer.Thursday = no data stored 700 z1CoolingTimer.Tuesday = no data stored 700 z1CoolingTimer.Wednesday = no data stored 700 z1DayTemp = 22 700 z1HolidayEndPeriod = no data stored 700 z1HolidayStartPeriod = no data stored 700 z1HolidayTemp = 5 700 z1Name1 = PLANT 700 z1Name2 = A 2 700 z1NightTemp = 18.5 700 z1OpMode = night 700 z1OpModeCooling = auto 700 z1QuickVetoTemp = 26 700 z1RoomTemp = 21.8125 700 z1RoomZoneMapping = no data stored 700 z1SFMode = auto 700 z1Shortname = no data stored 700 z1Timer.Friday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Monday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Saturday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Sunday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Thursday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Tuesday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1Timer.Wednesday = 20:00;22:00;00:00;00:00;00:00;00:00 700 z1ValveStatus = 0 700 z2ActualRoomTempDesired = 5 700 z2BankHolidayEndPeriod = no data stored 700 z2BankHolidayStartPeriod = no data stored 700 z2CoolingTemp = 24 700 z2CoolingTimer.Friday = no data stored 700 z2CoolingTimer.Monday = 06:00;22:00;-:-;-:-;-:-;-:- 700 z2CoolingTimer.Saturday = no data stored 700 z2CoolingTimer.Sunday = no data stored 700 z2CoolingTimer.Thursday = no data stored 700 z2CoolingTimer.Tuesday = no data stored 700 z2CoolingTimer.Wednesday = no data stored 700 z2DayTemp = 22 700 z2HolidayEndPeriod = no data stored 700 z2HolidayStartPeriod = no data stored 700 z2HolidayTemp = 5 700 z2Name1 = PLANT 700 z2Name2 = A 1 700 z2NightTemp = 18.5 700 z2OpMode = off 700 z2OpModeCooling = auto 700 z2QuickVetoTemp = 23 700 z2RoomTemp = 21.375 700 z2RoomZoneMapping = no data stored 700 z2SFMode = auto 700 z2Shortname = no data stored 700 z2Timer.Friday = 17:30;23:30;00:00;00:00;00:00;00:00 700 z2Timer.Monday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Saturday = 11:00;-:-;00:00;00:00;00:00;00:00 700 z2Timer.Sunday = 11:00;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Thursday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Tuesday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2Timer.Wednesday = 17:30;23:00;00:00;00:00;00:00;00:00 700 z2ValveStatus = 0 700 z3ActualRoomTempDesired = 0.0 700 z3BankHolidayEndPeriod = no data stored 700 z3BankHolidayStartPeriod = no data stored 700 z3CoolingTemp = 24 700 z3DayTemp = 20 700 z3HolidayEndPeriod = no data stored 700 z3HolidayStartPeriod = no data stored 700 z3HolidayTemp = 5 700 z3Name1 = no data stored 700 z3Name2 = no data stored 700 z3NightTemp = 15 700 z3OpMode = auto 700 z3OpModeCooling = auto 700 z3QuickVetoTemp = 21 700 z3RoomTemp = - 700 z3RoomZoneMapping = no data stored 700 z3SFMode = auto 700 z3Shortname = no data stored 700 z3ValveStatus = 0 bai AccessoriesOne = no data stored bai AccessoriesTwo = no data stored bai AntiCondensValue = no data stored bai averageIgnitiontime = no data stored bai BlockTimeHcMax = no data stored bai BoilerType = no data stored bai ChangesDSN = no data stored bai CirPump = no data stored bai CodingResistor = no data stored bai CounterStartattempts1 = 177 bai CounterStartattempts2 = 14 bai CounterStartAttempts3 = 1 bai CounterStartAttempts4 = 0 bai currenterror = -;-;-;-;- bai DateTime = nosignal;-:-:-;-.-.-;8.812 bai dcfState = no data stored bai DCFTimeDate = no data stored bai DCRoomthermostat = no data stored bai DeactivationsIFC = no data stored bai DeactivationsTemplimiter = 0 bai DeltaFlowReturnMax = no data stored bai DisplayMode = 2 bai DSN = no data stored bai DSNOffset = no data stored bai DSNStart = no data stored bai EbusSourceOn = no data stored bai EbusVoltage = no data stored bai errorhistory = no data stored bai ExternalFaultmessage = no data stored bai externalHwcSwitch = no data stored bai ExternGasvalve = no data stored bai ExtFlowTempDesiredMin = 40.00 bai ExtStorageModulCon = no data stored bai extWP = no data stored bai FanHours = 787 bai FanMaxSpeedOperation = no data stored bai FanMinSpeedOperation = no data stored bai FanPWMSum = no data stored bai FanPWMTest = no data stored bai FanSpeed = no data stored bai FanSpeedOffsetMax = no data stored bai FanSpeedOffsetMin = no data stored bai FanStarts = 24396 bai Flame = no data stored bai FlameSensingASIC = no data stored bai FloorHeatingContact = no data stored bai FlowsetHcMax = no data stored bai FlowsetHwcMax = no data stored bai FlowTemp = 18.69;ok bai FlowTempDesired = 0.00 bai FlowTempMax = 87.44 bai Fluegasvalve = no data stored bai FluegasvalveOpen = no data stored bai Gasvalve3UC = no data stored bai GasvalveASICFeedback = no data stored bai GasvalveUC = no data stored bai GasvalveUCFeedback = no data stored bai HcHours = 610 bai HcPumpMode = 3 bai HcPumpStarts = 10264 bai HcStarts = 1300 bai HcUnderHundredStarts = 11 bai HeatingSwitch = no data stored bai HoursTillService = - bai HwcDemand = no data stored bai HwcHours = 96 bai HwcImpellorSwitch = no data stored bai HwcStarts = 15900 bai HwcSwitch = no data stored bai HwcTemp = -13.50;cutoff bai HwcTempMax = 65.00 bai HwcTypes = no data stored bai HwcUnderHundredStarts = 26 bai HwcWaterflowMax = no data stored bai Ignitor = no data stored bai InitialisationEEPROM = no data stored bai IonisationVoltageLevel = no data stored bai maintenancedata_HwcTempMax = 0.00 bai maxIgnitiontime = no data stored bai minIgnitiontime = no data stored bai ModulationTempDesired = 81.7 bai OptionalRelais = no data stored bai OutdoorstempSensor = 8.81;ok bai OverflowCounter = yes bai ParamToken = no data stored bai PartloadHcKW = no data stored bai PartnumberBox = no data stored bai PositionValveSet = no data stored bai PowerValue = 16 06 56 18 64 1c bai PrAPSCounter = 0 bai PrAPSSum = no data stored bai PrEnergyCountHc1 = 2361718 bai PrEnergyCountHc2 = 0 bai PrEnergyCountHc3 = 0 bai PrEnergyCountHwc1 = 677538 bai PrEnergyCountHwc2 = 0 bai PrEnergyCountHwc3 = 0 bai PrEnergySumHc1 = 736035015 bai PrEnergySumHc2 = 0 bai PrEnergySumHc3 = 0 bai PrEnergySumHwc1 = 254615672 bai PrEnergySumHwc2 = 0 bai PrEnergySumHwc3 = 0 bai PrimaryCircuitFlowrate = no data stored bai ProductionByte = no data stored bai PrVortexFlowSensorValue = 0 bai PumpHours = 1020 bai PumpHwcFlowNumber = no data stored bai PumpHwcFlowSum = no data stored bai PumpPower = 0 bai PumpPowerDesired = auto bai RemainingBoilerblocktime = no data stored bai ReturnRegulation = no data stored bai ReturnTemp = 19.25;65227;ok bai ReturnTempExternal = -1.81;cutoff bai ReturnTempMax = 88.31 bai SerialNumber = no data stored bai SetFactoryValues = no data stored bai SetMode = auto;0.0;-;-;1;0;1;0;0;0 bai SHEMaxDeltaHwcFlow = no data stored bai SHEMaxFlowTemp = 0.00 bai Statenumber = no data stored bai Status01 = 18.5;18.5;8.812;-;18.5;off bai Status02 = on;60;75.0;70;65.0 bai Status16 = (ERR: invalid position for 3108b5040116 / 00) bai Status = (ERR: invalid position for 3108b5110103 / 00) bai StatusCirPump = on bai StorageDelay = no data stored bai StorageExitTemp = 116.06;circuit bai Storageloadpump = no data stored bai StorageLoadPumpHours = 299 bai StorageloadPumpStarts = 7549 bai StorageLoadTimeMax = no data stored bai StorageTemp = 19.25;ok bai StorageTempDesired = 55.00 bai StorageTempMax = 78.12 bai TargetFanSpeed = no data stored bai TargetFanSpeedOutput = no data stored bai TempDiffBlock = 0 bai TempDiffFailure = 0 bai TempGradientFailure = 0 bai Templimiter = off bai TemplimiterWithNTC = yes bai TempMaxDiffExtTFT = 0.00 bai Testbyte = no data stored bai TimerInputHc = no data stored bai ValveStarts = 4772 bai VolatileLockout = no data stored bai VolatileLockoutIFCGV = no data stored bai WarmstartDemand = no data stored bai WaterHcFlowMax = no data stored bai WaterPressure = no data stored bai WaterpressureBranchControlOff = no data stored bai WaterpressureMeasureCounter = 87 bai WaterpressureVariantSum = no data stored bai WP = no data stored bai WPPostrunTime = 5 bai WPSecondStage = no data stored broadcast datetime = no data stored broadcast error = no data stored broadcast hwcStatus = no data stored broadcast id = no data stored broadcast id = no data stored broadcast load = no data stored broadcast outsidetemp = 8.812 broadcast signoflife = no data stored broadcast vdatetime = 15:46:10;24.01.2023 general valuerange = no data stored memory eeprom = no data stored memory ram = no data stored scan id = no data stored scan.05 = Vaillant;VR920;2706;5703 scan.06 = Vaillant;VMD01;0108;1703 scan.06 id = 21;19;13;0010017718;3110;002717;N6 scan.08 = Vaillant;BAI00;0205;9602 scan.08 id = 21;19;19;0010021819;0001;005340;N4 scan.15 = Vaillant;70000;0613;6903 scan.15 id = 21;19;02;0020171318;0082;005145;N5 scan.35 = Vaillant;VR_91;0415;4803 scan.35 id = 21;19;09;0020171335;0082;005106;N5 scan.52 = Vaillant;VR_70;0109;2903 scan.52 id = 21;18;50;00????????;????;??????;?5 scan.ed = Vaillant;VMD01;0108;1703 scan.ed id = 21;19;13;0010017718;3110;002717;N6 vr_70 currenterror = -;-;-;-;- vr_70 errorhistory = no data stored vr_70 SensorData = -;-;-;-;15.31;19.94;c8 7d 00

I have looked for messages without being able to interpret, but there are no messages from unit 06. [image: image] https://user-images.githubusercontent.com/101360964/214335161-684a32f3-7530-449a-8e5f-c95eae61cc39.png

Would it be possible to send a hexadecimal string to the bus in order to read any of the VMD01 sensors and see if they respond?

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1402131785, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM67OKOW5CKQGKY5KTUDWT7X7XANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[Wassman2020]

Hi.

this is the log of ebus star.

s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started

ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=eehohWeiZoo6Ahchai8oog8eej4vaep1ri3acaeCoo2Iath0kahjoo5Kahhahf6o --scanconfig --mqttjson --lograwdata --configpath=config/ebusd --latency=10 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --lograwdatafile=/config/ebus/raw.log --lograwdatasize=500 --device=enh:192.168.2.32:9999 --log=all:notice --log=main:notice --log=bus:notice --log=update:notice --log=network:notice --log=other:notice --enablehex 2023-01-24 17:27:57.030 [main notice] ebusd 23.1.p20230106 started with auto scan on enhanced device 192.168.2.32:9999 2023-01-24 17:27:57.067 [bus notice] device status: resetting 2023-01-24 17:27:57.069 [bus notice] bus started with own address 31/36 2023-01-24 17:27:57.078 [mqtt notice] connection established 2023-01-24 17:27:57.194 [bus notice] signal acquired 2023-01-24 17:27:57.320 [bus notice] device status: reset, supports info 2023-01-24 17:27:57.333 [bus notice] new master 00, master count 2 023-01-24 17:27:57.383 [bus notice] new master 10, master count 3 2023-01-24 17:27:57.384 [update notice] received unknown MS cmd: 0015b52406020001000500 / 080101050000008841 2023-01-24 17:27:57.428 [bus notice] device status: extra info: firmware 1.1[7f16].2[73c8], jumpers 0x3b 2023-01-24 17:27:59.423 [bus notice] new master 03, master count 4 2023-01-24 17:27:59.423 [update notice] received unknown MS cmd: 1008b5110101 / 092121a008ff220000ff 2023-01-24 17:27:59.732 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080f8003d01c87d00 2023-01-24 17:27:59.986 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-24 17:28:00.769 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-24 17:28:01.000 [update notice] received unknown MS cmd: 0015b52406020001000400 / 080301040000008242 2023-01-24 17:28:01.074 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-24 17:28:01.515 [update notice] received unknown MS cmd: 0015b52406020003001c00 / 0501031c0000 2023-01-24 17:28:01.739 [update notice] received unknown MS cmd: 0015b52406020003000e00 / 0503030e0000 2023-01-24 17:28:01.975 [update notice] received unknown MS cmd: 0015b52406020003000700 / 08030307000000b041 2023-01-24 17:28:02.049 [bus notice] max. symbols per second: 103 2023-01-24 17:28:02.708 [update notice] received unknown MS cmd: 0015b52406020003000f00 / 0801030f000000b141 2023-01-24 17:28:02.994 [update notice] received unknown MS cmd: 0015b52406020003001700 / 0a03031700504c414e5400 2023-01-24 17:28:03.239 [update notice] received unknown MS cmd: 0015b52406020003001800 / 0a03031800412032202000 2023-01-24 17:28:03.468 [update notice] received unknown MS cmd: 0015b52406020003000600 / 06030306000300 2023-01-24 17:28:03.694 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:28:03.921 [update notice] received unknown MS cmd: 0015b52406020003000100 / 06020301000100 2023-01-24 17:28:04.013 [bus notice] max. symbols per second: 109 2023-01-24 17:28:04.145 [update notice] received unknown MS cmd: 0015b52406020003001900 / 050103190000 2023-01-24 17:28:04.382 [update notice] received unknown MS cmd: 0015b52406020003000900 / 080303090000009441 2023-01-24 17:28:04.617 [update notice] received unknown MS cmd: 0015b52406020003000800 / 08030308000000d041 2023-01-24 17:28:04.854 [update notice] received unknown MS cmd: 0015b52406020003000200 / 08020302000000c041 2023-01-24 17:28:05.001 [bus notice] max. symbols per second: 113 2023-01-24 17:28:05.090 [update notice] received unknown MS cmd: 0015b52406020003001400 / 080303140000009441 2023-01-24 17:28:05.318 [update notice] received unknown MS cmd: 0015b52406020003001b00 / 0601031b000000 2023-01-24 17:28:05.806 [update notice] received unknown MS cmd: 0015b52406020001000300 / 06030103000100 2023-01-24 17:28:06.292 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:28:06.863 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:28:07.272 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-24 17:28:07.273 [update notice] store 05 ident: done 2023-01-24 17:28:07.273 [update notice] sent scan-read scan.05 QQ=31: Vaillant;VR920;2706;5703 2023-01-24 17:28:07.273 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-24 17:28:07.278 [main error] unable to load scan config 05: no file from vaillant with prefix 05 matches ID "vr920", SW2706, HW5703 2023-01-24 17:28:07.278 [main error] scan config 05: ERR: element not found 2023-01-24 17:28:07.377 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:28:08.109 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:28:08.640 [update notice] received unknown MS cmd: 0015b52406020002000200 / 06030202000100 2023-01-24 17:28:09.454 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.455 [update notice] store 08 ident: done 2023-01-24 17:28:09.455 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.455 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.469 [main notice] read common config file vaillant/general.csv 2023-01-24 17:28:09.470 [main notice] read common config file vaillant/scan.csv 2023-01-24 17:28:09.471 [main notice] read common config file vaillant/a_06.vmd.csv 2023-01-24 17:28:09.471 [main notice] read common config file vaillant/0_quitar_ed.vmd.csv 2023-01-24 17:28:09.473 [main notice] read common config file vaillant/broadcast.csv 2023-01-24 17:28:09.474 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0205, HW9602 2023-01-24 17:28:09.557 [update notice] received unknown MS cmd: 0015b52406020002010200 / 06030202000100 2023-01-24 17:28:09.660 [update notice] received unknown MS cmd: 1008b5110101 / 092121a008ff220000ff 2023-01-24 17:28:09.825 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.060 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.229 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080f7003b01c87d00 2023-01-24 17:28:10.367 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:28:10.547 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.680 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-24 17:28:10.823 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:10.850 [main notice] found messages: 203 (2 conditional on 27 conditions, 0 poll, 10 update) 2023-01-24 17:28:11.004 [bus notice] max. symbols per second: 128 2023-01-24 17:28:11.059 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.157 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-24 17:28:11.314 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.510 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.633 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-24 17:28:11.808 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.808 [bus notice] scan 08: ;21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:13.507 [update notice] sent poll-read bai CounterStartattempts1 QQ=31: 177 2023-01-24 17:28:13.606 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-24 17:28:14.002 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-24 17:28:14.002 [update notice] store 15 ident: done 2023-01-24 17:28:14.003 [update notice] sent scan-read scan.15 QQ=31: Vaillant;70000;0613;6903 2023-01-24 17:28:14.003 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-24 17:28:14.122 [update notice] received unknown MS cmd: 0015b52406020003000600 / 06030306000300 2023-01-24 17:28:14.251 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231313930323030 2023-01-24 17:28:14.434 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-24 17:28:14.618 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-24 17:28:14.727 [update notice] received unknown MS cmd: 0015b52406020003010600 / 06030306000000 2023-01-24 17:28:14.852 [update notice] sent scan-read scan.15 id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-24 17:28:14.852 [bus notice] scan 15: ;21;19;02;0020171318;0082;005145;N5 2023-01-24 17:28:14.944 [main notice] read scan config file vaillant/15.700.csv for ID "70000", SW0613, HW6903 2023-01-24 17:28:14.945 [main notice] found messages: 642 (2 conditional on 27 conditions, 68 poll, 10 update) 2023-01-24 17:28:15.040 [bus notice] max. symbols per second: 137 2023-01-24 17:28:15.187 [update notice] received read 700 z1DayTemp QQ=00: 22 2023-01-24 17:28:15.682 [update notice] received read 700 z2DayTemp QQ=00: 22 2023-01-24 17:28:16.225 [update notice] received read 700 z1NightTemp QQ=00: 18.5 2023-01-24 17:28:16.719 [update notice] received read 700 z2NightTemp QQ=00: 18.5 2023-01-24 17:28:17.159 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.159 [update notice] store 52 ident: done 2023-01-24 17:28:17.160 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.160 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.282 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-24 17:28:17.435 [update notice] sent unknown MS cmd: 3152b5090124 / 09003231313835303030 2023-01-24 17:28:17.643 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-24 17:28:17.764 [update notice] received read 700 z1Name2 QQ=00: A 2
2023-01-24 17:28:17.939 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-24 17:28:18.015 [bus notice] max. symbols per second: 142 2023-01-24 17:28:18.164 [update notice] sent scan-read scan.52 id QQ=31: 21;18;50;00????????;????;??????;?5 2023-01-24 17:28:18.164 [bus notice] scan 52: ;21;18;50;00????????;????;??????;?5 2023-01-24 17:28:18.170 [main notice] read scan config file vaillant/52.vr_70.csv for ID "vr_70", SW0109, HW2903 2023-01-24 17:28:18.171 [main notice] found messages: 651 (2 conditional on 27 conditions, 68 poll, 10 update) 2023-01-24 17:28:18.285 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-24 17:28:18.875 [update notice] received read 700 z2Name2 QQ=00: A 1
2023-01-24 17:28:19.182 [update notice] sent poll-read bai CounterStartattempts2 QQ=31: 14 2023-01-24 17:28:19.502 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:19.795 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;20.00;c8 7d 00 2023-01-24 17:28:20.066 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:20.323 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:28:20.595 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-24 17:28:20.838 [update notice] received update-read broadcast vdatetime QQ=10: 17:25:29;24.01.2023 2023-01-24 17:28:21.091 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:21.357 [update notice] received unknown MS cmd: 1008b5110100 / 080a010a001f100000 2023-01-24 17:28:21.603 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:21.819 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-24 17:28:25.209 [update notice] sent poll-read bai CounterStartAttempts3 QQ=31: 1 023-01-24 17:28:29.545 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:29.839 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.69;c8 7d 00 2023-01-24 17:28:30.120 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:30.885 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:31.130 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:31.315 [update notice] sent poll-read bai CounterStartAttempts4 QQ=31: 0 2023-01-24 17:28:37.192 [update notice] sent poll-read bai DeactivationsTemplimiter QQ=31: 0 2023-01-24 17:28:39.584 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:39.881 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.69;c8 7d 00 2023-01-24 17:28:40.153 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:40.529 [bus notice] new master 30, master count 5 2023-01-24 17:28:40.587 [update notice] received unknown MS cmd: 3015b5240108 / 080000030108012530 2023-01-24 17:28:40.930 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:41.176 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:43.182 [update notice] sent poll-read bai DisplayMode QQ=31: 2 2023-01-24 17:28:49.213 [update notice] sent poll-read bai ExtFlowTempDesiredMin QQ=31: 40.00 2023-01-24 17:28:49.317 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-24 17:28:49.587 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:49.877 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.94;c8 7d 00 2023-01-24 17:28:50.111 [update notice] received read 700 Time QQ=00: 17:26:00 2023-01-24 17:28:50.209 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:50.429 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.429 [update notice] store 35 ident: done 2023-01-24 17:28:50.429 [update notice] sent scan-read scan.35 QQ=31: Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.429 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.629 [update notice] sent unknown MS cmd: 3135b5090124 / 09003231313930393030 2023-01-24 17:28:50.719 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:28:50.936 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-24 17:28:51.180 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-24 17:28:51.315 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:51.554 [update notice] sent scan-read scan.35 id QQ=31: 21;19;09;0020171335;0082;005106;N5 2023-01-24 17:28:51.554 [bus notice] scan 35: ;21;19;09;0020171335;0082;005106;N5 2023-01-24 17:28:51.558 [main error] unable to load scan config 35: no file from vaillant with prefix 35 matches ID "vr_91", SW0415, HW4803 2023-01-24 17:28:51.558 [main error] scan config 35: ERR: element not found 2023-01-24 17:28:51.720 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:53.337 [update notice] received read 700 Date QQ=00: 24.01.2023 2023-01-24 17:28:53.874 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-24 17:28:54.356 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-24 17:28:54.839 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-24 17:28:55.185 [update notice] sent poll-read bai FanHours QQ=31: 787 2023-01-24 17:28:55.296 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 17 2023-01-24 17:28:55.750 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-24 17:28:56.240 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-24 17:28:56.718 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:28:57.128 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:28:57.569 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:28:58.064 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:28:58.598 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-24 17:28:59.218 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-24 17:28:59.613 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:59.905 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.50;c8 7d 00 2023-01-24 17:29:00.088 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:29:00.225 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:00.958 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:01.179 [update notice] sent poll-read bai FanStarts QQ=31: 24396 2023-01-24 17:29:01.303 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:03.518 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-24 17:29:04.065 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-24 17:29:04.492 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-24 17:29:04.945 [update notice] received read 700 z1DayTemp QQ=00: 22 2023-01-24 17:29:05.439 [update notice] received read 700 z2DayTemp QQ=00: 22 2023-01-24 17:29:05.896 [update notice] received read 700 z1NightTemp QQ=00: 18.5 2023-01-24 17:29:06.344 [update notice] received read 700 z2NightTemp QQ=00: 18.5 2023-01-24 17:29:06.849 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-24 17:29:07.214 [update notice] sent poll-read bai FlowTemp QQ=31: 16.62;ok 2023-01-24 17:29:07.339 [update notice] received read 700 z1Name2 QQ=00: A 2
2023-01-24 17:29:07.801 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-24 17:29:08.261 [update notice] received read 700 z2Name2 QQ=00: A 1
2023-01-24 17:29:09.652 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:09.947 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.75;c8 7d 00 2023-01-24 17:29:10.217 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:10.995 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:11.243 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:13.206 [update notice] sent poll-read bai FlowTempDesired QQ=31: 0.00 2023-01-24 17:29:19.192 [update notice] sent poll-read bai FlowTempMax QQ=31: 87.44 2023-01-24 17:29:19.682 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:19.977 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.88;c8 7d 00 2023-01-24 17:29:20.246 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:20.499 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:29:20.787 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-24 17:29:21.006 [update notice] received update-read broadcast vdatetime QQ=10: 17:26:29;24.01.2023 2023-01-24 17:29:21.264 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:21.528 [update notice] received unknown MS cmd: 1008b5110100 / 080a010a001f100000 2023-01-24 17:29:21.775 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:21.994 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-24 17:29:22.236 [update notice] received unknown MS cmd: 1008b5100305ff01 / 0101 2023-01-24 17:29:22.475 [update notice] received update-write bai StatusCirPump QQ=10: on 2023-01-24 17:29:22.722 [update notice] received unknown MS cmd: 1008b5120204ff / 0101 2023-01-24 17:29:22.953 [update notice] received unknown MS cmd: 1008b513020508 / 00 2023-01-24 17:29:23.163 [update notice] received unknown BC cmd: 10feb510020601 2023-01-24 17:29:25.124 [bus error] poll bai HcHours failed: ERR: SYN received 2023-01-24 17:29:29.727 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:30.018 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.50;c8 7d 00 2023-01-24 17:29:30.290 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:31.064 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:31.263 [update notice] sent poll-read bai HcPumpMode QQ=31: 3 2023-01-24 17:29:31.430 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:37.197 [update notice] sent poll-read bai HcPumpStarts QQ=31: 10264 2023-01-24 17:29:39.770 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:40.058 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.88;c8 7d 00 2023-01-24 17:29:40.325 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:41.103 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:41.347 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:43.192 [update notice] sent poll-read bai HcStarts QQ=31: 1300 2023-01-24 17:29:49.221 [update notice] sent poll-read bai HcUnderHundredStarts QQ=31: 11 2023-01-24 17:29:49.325 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-24 17:29:49.809 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:50.101 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.81;c8 7d 00 2023-01-24 17:29:50.371 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:50.628 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:29:51.155 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:51.397 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:52.713 [update notice] received read 700 Time QQ=00: 17:27:03 2023-01-24 17:29:53.285 [update notice] received read 700 Date QQ=00: 24.01.2023 2023-01-24 17:29:53.919 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-24 17:29:54.393 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-24 17:29:54.878 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-24 17:29:55.207 [update notice] sent poll-read bai HoursTillService QQ=31: - 2023-01-24 17:29:55.367 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 17 2023-01-24 17:29:55.869 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-24 17:29:56.353 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-24 17:29:56.836 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:29:57.297 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:29:57.718 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:29:58.226 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:29:58.760 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-24 17:29:59.451 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-24 17:29:59.849 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:30:00.141 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.56;c8 7d 00 2023-01-24 17:30:00.234 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001

[Strobistar]

From what I see in this logfile: you got a reference to "vaillant/a_06.vmd.csv"... Did you create this yourself? It does get accepted one way or another.

What I would do: create an offline git clone of https://github.com/john30/ebusd-configuration/tree/master/ebusd-2.x.x/, in this repo copy over the 06.pms.csv to 06.vmd.csv, point.

Restart the ebusd service with updated "--configpath=/etc/ebusd/" parameter, and "--scanconfig=full" add the following for "friendliness" --pollinterval=180 --latency 5000 --acquiretimeout=15000

Report back in with your new log.

On Tue, Jan 24, 2023 at 5:32 PM Wassman2020 @.***> wrote:

Hi.

this is the log of ebus star.

s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started

ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=eehohWeiZoo6Ahchai8oog8eej4vaep1ri3acaeCoo2Iath0kahjoo5Kahhahf6o --scanconfig --mqttjson --lograwdata --configpath=config/ebusd --latency=10 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --lograwdatafile=/config/ebus/raw.log --lograwdatasize=500 --device=enh: 192.168.2.32:9999 --log=all:notice --log=main:notice --log=bus:notice --log=update:notice --log=network:notice --log=other:notice --enablehex 2023-01-24 17:27:57.030 [main notice] ebusd 23.1.p20230106 started with auto scan on enhanced device 192.168.2.32:9999 2023-01-24 17:27:57.067 [bus notice] device status: resetting 2023-01-24 17:27:57.069 [bus notice] bus started with own address 31/36 2023-01-24 17:27:57.078 [mqtt notice] connection established 2023-01-24 17:27:57.194 [bus notice] signal acquired 2023-01-24 17:27:57.320 [bus notice] device status: reset, supports info 2023-01-24 17:27:57.333 [bus notice] new master 00, master count 2 023-01-24 17:27:57.383 [bus notice] new master 10, master count 3 2023-01-24 17:27:57.384 [update notice] received unknown MS cmd: 0015b52406020001000500 / 080101050000008841 2023-01-24 17:27:57.428 [bus notice] device status: extra info: firmware 1.1[7f16].2[73c8], jumpers 0x3b 2023-01-24 17:27:59.423 [bus notice] new master 03, master count 4 2023-01-24 17:27:59.423 [update notice] received unknown MS cmd: 1008b5110101 / 092121a008ff220000ff 2023-01-24 17:27:59.732 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080f8003d01c87d00 2023-01-24 17:27:59.986 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-24 17:28:00.769 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-24 17:28:01.000 [update notice] received unknown MS cmd: 0015b52406020001000400 / 080301040000008242 2023-01-24 17:28:01.074 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-24 17:28:01.515 [update notice] received unknown MS cmd: 0015b52406020003001c00 / 0501031c0000 2023-01-24 17:28:01.739 [update notice] received unknown MS cmd: 0015b52406020003000e00 / 0503030e0000 2023-01-24 17:28:01.975 [update notice] received unknown MS cmd: 0015b52406020003000700 / 08030307000000b041 2023-01-24 17:28:02.049 [bus notice] max. symbols per second: 103 2023-01-24 17:28:02.708 [update notice] received unknown MS cmd: 0015b52406020003000f00 / 0801030f000000b141 2023-01-24 17:28:02.994 [update notice] received unknown MS cmd: 0015b52406020003001700 / 0a03031700504c414e5400 2023-01-24 17:28:03.239 [update notice] received unknown MS cmd: 0015b52406020003001800 / 0a03031800412032202000 2023-01-24 17:28:03.468 [update notice] received unknown MS cmd: 0015b52406020003000600 / 06030306000300 2023-01-24 17:28:03.694 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:28:03.921 [update notice] received unknown MS cmd: 0015b52406020003000100 / 06020301000100 2023-01-24 17:28:04.013 [bus notice] max. symbols per second: 109 2023-01-24 17:28:04.145 [update notice] received unknown MS cmd: 0015b52406020003001900 / 050103190000 2023-01-24 17:28:04.382 [update notice] received unknown MS cmd: 0015b52406020003000900 / 080303090000009441 2023-01-24 17:28:04.617 [update notice] received unknown MS cmd: 0015b52406020003000800 / 08030308000000d041 2023-01-24 17:28:04.854 [update notice] received unknown MS cmd: 0015b52406020003000200 / 08020302000000c041 2023-01-24 17:28:05.001 [bus notice] max. symbols per second: 113 2023-01-24 17:28:05.090 [update notice] received unknown MS cmd: 0015b52406020003001400 / 080303140000009441 2023-01-24 17:28:05.318 [update notice] received unknown MS cmd: 0015b52406020003001b00 / 0601031b000000 2023-01-24 17:28:05.806 [update notice] received unknown MS cmd: 0015b52406020001000300 / 06030103000100 2023-01-24 17:28:06.292 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:28:06.863 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:28:07.272 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-24 17:28:07.273 [update notice] store 05 ident: done 2023-01-24 17:28:07.273 [update notice] sent scan-read scan.05 QQ=31: Vaillant;VR920;2706;5703 2023-01-24 17:28:07.273 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-24 17:28:07.278 [main error] unable to load scan config 05: no file from vaillant with prefix 05 matches ID "vr920", SW2706, HW5703 2023-01-24 17:28:07.278 [main error] scan config 05: ERR: element not found 2023-01-24 17:28:07.377 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:28:08.109 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:28:08.640 [update notice] received unknown MS cmd: 0015b52406020002000200 / 06030202000100 2023-01-24 17:28:09.454 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.455 [update notice] store 08 ident: done 2023-01-24 17:28:09.455 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.455 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-24 17:28:09.469 [main notice] read common config file vaillant/general.csv 2023-01-24 17:28:09.470 [main notice] read common config file vaillant/scan.csv 2023-01-24 17:28:09.471 [main notice] read common config file vaillant/a_06.vmd.csv 2023-01-24 17:28:09.471 [main notice] read common config file vaillant/0_quitar_ed.vmd.csv 2023-01-24 17:28:09.473 [main notice] read common config file vaillant/broadcast.csv 2023-01-24 17:28:09.474 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0205, HW9602 2023-01-24 17:28:09.557 [update notice] received unknown MS cmd: 0015b52406020002010200 / 06030202000100 2023-01-24 17:28:09.660 [update notice] received unknown MS cmd: 1008b5110101 / 092121a008ff220000ff 2023-01-24 17:28:09.825 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.060 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.229 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080f7003b01c87d00 2023-01-24 17:28:10.367 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:28:10.547 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-24 17:28:10.680 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-24 17:28:10.823 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:10.850 [main notice] found messages: 203 (2 conditional on 27 conditions, 0 poll, 10 update) 2023-01-24 17:28:11.004 [bus notice] max. symbols per second: 128 2023-01-24 17:28:11.059 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.157 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-24 17:28:11.314 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.510 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.633 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-24 17:28:11.808 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:11.808 [bus notice] scan 08: ;21;19;19;0010021819;0001;005340;N4 2023-01-24 17:28:13.507 [update notice] sent poll-read bai CounterStartattempts1 QQ=31: 177 2023-01-24 17:28:13.606 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-24 17:28:14.002 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-24 17:28:14.002 [update notice] store 15 ident: done 2023-01-24 17:28:14.003 [update notice] sent scan-read scan.15 QQ=31: Vaillant;70000;0613;6903 2023-01-24 17:28:14.003 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-24 17:28:14.122 [update notice] received unknown MS cmd: 0015b52406020003000600 / 06030306000300 2023-01-24 17:28:14.251 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231313930323030 2023-01-24 17:28:14.434 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-24 17:28:14.618 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-24 17:28:14.727 [update notice] received unknown MS cmd: 0015b52406020003010600 / 06030306000000 2023-01-24 17:28:14.852 [update notice] sent scan-read scan.15 id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-24 17:28:14.852 [bus notice] scan 15: ;21;19;02;0020171318;0082;005145;N5 2023-01-24 17:28:14.944 [main notice] read scan config file vaillant/15.700.csv for ID "70000", SW0613, HW6903 2023-01-24 17:28:14.945 [main notice] found messages: 642 (2 conditional on 27 conditions, 68 poll, 10 update) 2023-01-24 17:28:15.040 [bus notice] max. symbols per second: 137 2023-01-24 17:28:15.187 [update notice] received read 700 z1DayTemp QQ=00: 22 2023-01-24 17:28:15.682 [update notice] received read 700 z2DayTemp QQ=00: 22 2023-01-24 17:28:16.225 [update notice] received read 700 z1NightTemp QQ=00: 18.5 2023-01-24 17:28:16.719 [update notice] received read 700 z2NightTemp QQ=00: 18.5 2023-01-24 17:28:17.159 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.159 [update notice] store 52 ident: done 2023-01-24 17:28:17.160 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.160 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-24 17:28:17.282 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-24 17:28:17.435 [update notice] sent unknown MS cmd: 3152b5090124 / 09003231313835303030 2023-01-24 17:28:17.643 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-24 17:28:17.764 [update notice] received read 700 z1Name2 QQ=00: A 2 2023-01-24 17:28:17.939 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-24 17:28:18.015 [bus notice] max. symbols per second: 142 2023-01-24 17:28:18.164 [update notice] sent scan-read scan.52 id QQ=31: 21;18;50;00????????;????;??????;?5 2023-01-24 17:28:18.164 [bus notice] scan 52: ;21;18;50;00????????;????;??????;?5 2023-01-24 17:28:18.170 [main notice] read scan config file vaillant/52.vr_70.csv for ID "vr_70", SW0109, HW2903 2023-01-24 17:28:18.171 [main notice] found messages: 651 (2 conditional on 27 conditions, 68 poll, 10 update) 2023-01-24 17:28:18.285 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-24 17:28:18.875 [update notice] received read 700 z2Name2 QQ=00: A 1 2023-01-24 17:28:19.182 [update notice] sent poll-read bai CounterStartattempts2 QQ=31: 14 2023-01-24 17:28:19.502 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:19.795 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;20.00;c8 7d 00 2023-01-24 17:28:20.066 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:20.323 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:28:20.595 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-24 17:28:20.838 [update notice] received update-read broadcast vdatetime QQ=10: 17:25:29;24.01.2023 2023-01-24 17:28:21.091 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:21.357 [update notice] received unknown MS cmd: 1008b5110100 / 080a010a001f100000 2023-01-24 17:28:21.603 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:21.819 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-24 17:28:25.209 [update notice] sent poll-read bai CounterStartAttempts3 QQ=31: 1 023-01-24 17:28:29.545 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:29.839 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.69;c8 7d 00 2023-01-24 17:28:30.120 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:30.885 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:31.130 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:31.315 [update notice] sent poll-read bai CounterStartAttempts4 QQ=31: 0 2023-01-24 17:28:37.192 [update notice] sent poll-read bai DeactivationsTemplimiter QQ=31: 0 2023-01-24 17:28:39.584 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:39.881 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.69;c8 7d 00 2023-01-24 17:28:40.153 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:40.529 [bus notice] new master 30, master count 5 2023-01-24 17:28:40.587 [update notice] received unknown MS cmd: 3015b5240108 / 080000030108012530 2023-01-24 17:28:40.930 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:41.176 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:43.182 [update notice] sent poll-read bai DisplayMode QQ=31: 2 2023-01-24 17:28:49.213 [update notice] sent poll-read bai ExtFlowTempDesiredMin QQ=31: 40.00 2023-01-24 17:28:49.317 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-24 17:28:49.587 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:49.877 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.94;c8 7d 00 2023-01-24 17:28:50.111 [update notice] received read 700 Time QQ=00: 17:26:00 2023-01-24 17:28:50.209 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:28:50.429 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.429 [update notice] store 35 ident: done 2023-01-24 17:28:50.429 [update notice] sent scan-read scan.35 QQ=31: Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.429 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-24 17:28:50.629 [update notice] sent unknown MS cmd: 3135b5090124 / 09003231313930393030 2023-01-24 17:28:50.719 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:28:50.936 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-24 17:28:51.180 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-24 17:28:51.315 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:28:51.554 [update notice] sent scan-read scan.35 id QQ=31: 21;19;09;0020171335;0082;005106;N5 2023-01-24 17:28:51.554 [bus notice] scan 35: ;21;19;09;0020171335;0082;005106;N5 2023-01-24 17:28:51.558 [main error] unable to load scan config 35: no file from vaillant with prefix 35 matches ID "vr_91", SW0415, HW4803 2023-01-24 17:28:51.558 [main error] scan config 35: ERR: element not found 2023-01-24 17:28:51.720 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:28:53.337 [update notice] received read 700 Date QQ=00: 24.01.2023 2023-01-24 17:28:53.874 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-24 17:28:54.356 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-24 17:28:54.839 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-24 17:28:55.185 [update notice] sent poll-read bai FanHours QQ=31: 787 2023-01-24 17:28:55.296 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 17 2023-01-24 17:28:55.750 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-24 17:28:56.240 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-24 17:28:56.718 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:28:57.128 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:28:57.569 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:28:58.064 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:28:58.598 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-24 17:28:59.218 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-24 17:28:59.613 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:28:59.905 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.50;c8 7d 00 2023-01-24 17:29:00.088 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-24 17:29:00.225 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:00.958 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:01.179 [update notice] sent poll-read bai FanStarts QQ=31: 24396 2023-01-24 17:29:01.303 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:03.518 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-24 17:29:04.065 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-24 17:29:04.492 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-24 17:29:04.945 [update notice] received read 700 z1DayTemp QQ=00: 22 2023-01-24 17:29:05.439 [update notice] received read 700 z2DayTemp QQ=00: 22 2023-01-24 17:29:05.896 [update notice] received read 700 z1NightTemp QQ=00: 18.5 2023-01-24 17:29:06.344 [update notice] received read 700 z2NightTemp QQ=00: 18.5 2023-01-24 17:29:06.849 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-24 17:29:07.214 [update notice] sent poll-read bai FlowTemp QQ=31: 16.62;ok 2023-01-24 17:29:07.339 [update notice] received read 700 z1Name2 QQ=00: A 2 2023-01-24 17:29:07.801 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-24 17:29:08.261 [update notice] received read 700 z2Name2 QQ=00: A 1 2023-01-24 17:29:09.652 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:09.947 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.75;c8 7d 00 2023-01-24 17:29:10.217 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:10.995 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:11.243 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:13.206 [update notice] sent poll-read bai FlowTempDesired QQ=31: 0.00 2023-01-24 17:29:19.192 [update notice] sent poll-read bai FlowTempMax QQ=31: 87.44 2023-01-24 17:29:19.682 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:19.977 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.88;c8 7d 00 2023-01-24 17:29:20.246 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:20.499 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:29:20.787 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-24 17:29:21.006 [update notice] received update-read broadcast vdatetime QQ=10: 17:26:29;24.01.2023 2023-01-24 17:29:21.264 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:21.528 [update notice] received unknown MS cmd: 1008b5110100 / 080a010a001f100000 2023-01-24 17:29:21.775 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:21.994 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-24 17:29:22.236 [update notice] received unknown MS cmd: 1008b5100305ff01 / 0101 2023-01-24 17:29:22.475 [update notice] received update-write bai StatusCirPump QQ=10: on 2023-01-24 17:29:22.722 [update notice] received unknown MS cmd: 1008b5120204ff / 0101 2023-01-24 17:29:22.953 [update notice] received unknown MS cmd: 1008b513020508 / 00 2023-01-24 17:29:23.163 [update notice] received unknown BC cmd: 10feb510020601 2023-01-24 17:29:25.124 [bus error] poll bai HcHours failed: ERR: SYN received 2023-01-24 17:29:29.727 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:30.018 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.50;c8 7d 00 2023-01-24 17:29:30.290 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:31.064 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:31.263 [update notice] sent poll-read bai HcPumpMode QQ=31: 3 2023-01-24 17:29:31.430 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:37.197 [update notice] sent poll-read bai HcPumpStarts QQ=31: 10264 2023-01-24 17:29:39.770 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:40.058 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.50;19.88;c8 7d 00 2023-01-24 17:29:40.325 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:41.103 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:41.347 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:43.192 [update notice] sent poll-read bai HcStarts QQ=31: 1300 2023-01-24 17:29:49.221 [update notice] sent poll-read bai HcUnderHundredStarts QQ=31: 11 2023-01-24 17:29:49.325 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-24 17:29:49.809 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:29:50.101 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.44;19.81;c8 7d 00 2023-01-24 17:29:50.371 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-24 17:29:50.628 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-24 17:29:51.155 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-24 17:29:51.397 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-24 17:29:52.713 [update notice] received read 700 Time QQ=00: 17:27:03 2023-01-24 17:29:53.285 [update notice] received read 700 Date QQ=00: 24.01.2023 2023-01-24 17:29:53.919 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-24 17:29:54.393 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-24 17:29:54.878 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-24 17:29:55.207 [update notice] sent poll-read bai HoursTillService QQ=31: - 2023-01-24 17:29:55.367 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 17 2023-01-24 17:29:55.869 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-24 17:29:56.353 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-24 17:29:56.836 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-24 17:29:57.297 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-24 17:29:57.718 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-24 17:29:58.226 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-24 17:29:58.760 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-24 17:29:59.451 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-24 17:29:59.849 [update notice] received poll-read bai Status01 QQ=10: 16.5;16.5;8.625;-;17.0;off 2023-01-24 17:30:00.141 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;15.38;19.56;c8 7d 00 2023-01-24 17:30:00.234 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1402237250, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM652HUARB7VU3EJRUY3WT77Z7ANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[Wassman2020]

Hi.

I changed the parameters and now stating to show new fields and new devices in the bus.

s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started

ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=eehohWeiZoo6Ahchai8oog8eej4vaep1ri3acaeCoo2Iath0kahjoo5Kahhahf6o --mqttjson --lograwdata --configpath=config/ebusd --latency=5000 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --lograwdatafile=/config/ebus/raw.log --lograwdatasize=500 --device=enh:192.168.2.32:9999 --log=all:notice --log=main:notice --log=bus:notice --log=update:notice --log=network:notice --log=other:notice --enablehex --scanconfig=full --pollinterval=180 --acquiretimeout=15000 2023-01-25 15:10:06.222 [main notice] ebusd 23.1.p20230106 started with full scan on enhanced device 192.168.2.32:9999 2023-01-25 15:10:06.262 [bus notice] device status: resetting 2023-01-25 15:10:06.263 [bus notice] bus started with own address 31/36 2023-01-25 15:10:06.280 [bus notice] signal acquired 2023-01-25 15:10:06.400 [bus notice] device status: reset, supports info 2023-01-25 15:10:06.490 [bus notice] device status: extra info: firmware 1.1[7f16].2[73c8], jumpers 0x3b 2023-01-25 15:10:06.791 [mqtt notice] connection established 2023-01-25 15:10:07.263 [bus notice] new master 10, master count 2 2023-01-25 15:10:07.319 [bus notice] new master 03, master count 3 2023-01-25 15:10:07.319 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:07.614 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e1002201c87d00 2023-01-25 15:10:07.883 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:08.533 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:08.780 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:15.127 [bus notice] new master 00, master count 4 2023-01-25 15:10:15.196 [update notice] received unknown MS cmd: 0008b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:15.560 [update notice] received unknown MS cmd: 0008b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:15.926 [update notice] received unknown MS cmd: 0008b503020004 / 0affffffffffffffffffff 2023-01-25 15:10:16.272 [main notice] starting initial full scan 2023-01-25 15:10:16.384 [update notice] received unknown MS cmd: 0015b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:17.644 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:17.721 [update notice] received unknown MS cmd: 0015b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:17.869 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-25 15:10:17.869 [update notice] store 05 ident: done 2023-01-25 15:10:17.869 [update notice] sent scan-read scan.05 QQ=31: Vaillant;VR920;2706;5703 2023-01-25 15:10:17.870 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-25 15:10:18.107 [bus notice] new master 01, master count 5 2023-01-25 15:10:18.107 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.107 [update notice] store 06 ident: done 2023-01-25 15:10:18.107 [update notice] sent scan-read scan.06 QQ=31: Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.107 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.240 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e3002a01c87d00 2023-01-25 15:10:18.375 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-25 15:10:18.375 [update notice] store 08 ident: done 2023-01-25 15:10:18.375 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0205;9602 2023-01-25 15:10:18.375 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-25 15:10:19.689 [bus notice] new master 30, master count 6 2023-01-25 15:10:19.689 [update notice] received unknown MS cmd: 0035b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:19.782 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:20.508 [update notice] received unknown MS cmd: 0035b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:21.222 [update notice] received unknown MS cmd: 0006b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:21.307 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:10:22.005 [update notice] received unknown MS cmd: 0052b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:22.752 [update notice] received unknown MS cmd: 0052b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:22.801 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:23.493 [update notice] received unknown MS cmd: 0052b503020004 / 0affffffffffffffffffff 2023-01-25 15:10:24.171 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:24.362 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-25 15:10:24.362 [update notice] store 15 ident: done 2023-01-25 15:10:24.362 [update notice] sent scan-read scan.15 QQ=31: Vaillant;70000;0613;6903 2023-01-25 15:10:24.362 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-25 15:10:26.275 [main error] unable to load scan config 05: no file from vaillant with prefix 05 matches ID "vr920", SW2706, HW5703 2023-01-25 15:10:26.276 [main error] scan config 05: ERR: element not found 2023-01-25 15:10:27.379 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:28.289 [main notice] read common config file vaillant/general.csv 2023-01-25 15:10:28.290 [main notice] read common config file vaillant/scan.csv 2023-01-25 15:10:28.291 [main notice] read common config file vaillant/0_quitar_ed.vmd.csv 2023-01-25 15:10:28.292 [main notice] read common config file vaillant/broadcast.csv 2023-01-25 15:10:28.297 [main notice] read scan config file vaillant/06.vmd.csv for ID "vmd01", SW0108, HW1703 2023-01-25 15:10:28.298 [main notice] found messages: 87 (0 conditional on 0 conditions, 0 poll, 8 update) 2023-01-25 15:10:29.225 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002401c87d00 2023-01-25 15:10:29.968 [update notice] sent unknown MS cmd: 3106b5090124 / 09003231313931333030 2023-01-25 15:10:30.679 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:31.471 [update notice] sent scan-read scan.06 id QQ=31: 2023-01-25 15:10:31.608 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:31.850 [update notice] sent scan-read scan.06 id QQ=31: 2023-01-25 15:10:32.561 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:33.350 [update notice] sent scan-read scan.06 id QQ=31: 21;19;13;0010017718;3110;002717;N6 2023-01-25 15:10:33.350 [bus notice] scan 06: ;21;19;13;0010017718;3110;002717;N6 2023-01-25 15:10:36.357 [update notice] received unknown MS cmd: 0015b52406020000004300 / 06020043000000 2023-01-25 15:10:37.071 [update notice] received unknown MS cmd: 0015b52406020000003400 / 0703003400190117 2023-01-25 15:10:37.794 [update notice] received unknown MS cmd: 0015b52406020000008200 / 08030082000000a040 2023-01-25 15:10:37.885 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:38.476 [main error] scan config 08: ERR: arbitration lost 2023-01-25 15:10:38.559 [update notice] received unknown MS cmd: 0015b52406020000009000 / 050100900000 2023-01-25 15:10:39.287 [update notice] received unknown MS cmd: 0015b52406020000000600 / 06020006000000 2023-01-25 15:10:39.411 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002401c87d00 2023-01-25 15:10:40.077 [update notice] received unknown MS cmd: 0015b52406020000003900 / 08010039000000803f 2023-01-25 15:10:40.784 [update notice] received unknown MS cmd: 0015b52406020000004200 / 06020042000000 2023-01-25 15:10:40.879 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:41.035 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231313930323030 2023-01-25 15:10:41.148 [update notice] received unknown MS cmd: 0015b52406020000004b00 / 0801004b0000006241 2023-01-25 15:10:41.870 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-25 15:10:41.971 [update notice] received unknown MS cmd: 0015b52406020000007400 / 050300740000 2023-01-25 15:10:42.056 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:42.197 [update notice] received unknown MS cmd: 0015b52406020000007800 / 06030078000000 2023-01-25 15:10:42.908 [update notice] received unknown MS cmd: 0015b52406020000006900 / 06030069000200 2023-01-25 15:10:42.977 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:43.129 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.129 [update notice] store 35 ident: done 2023-01-25 15:10:43.129 [update notice] sent scan-read scan.35 QQ=31: Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.129 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.232 [update notice] received unknown MS cmd: 0015b52406020000001600 / 06020016000100 2023-01-25 15:10:43.362 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-25 15:10:43.526 [update notice] received unknown MS cmd: 0015b52406020000007300 / 080100730000000a41 2023-01-25 15:10:43.706 [update notice] sent scan-read scan.15 id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-25 15:10:43.706 [bus notice] scan 15: ;21;19;02;0020171318;0082;005145;N5 2023-01-25 15:10:43.744 [main notice] read scan config file vaillant/15.700.csv for ID "70000", SW0613, HW6903 2023-01-25 15:10:43.745 [main notice] found messages: 527 (0 conditional on 0 conditions, 25 poll, 8 update) 2023-01-25 15:10:43.820 [update notice] received read 700 HolidayEndPeriod QQ=00: 01.01.2015 2023-01-25 15:10:44.068 [bus notice] max. symbols per second: 140 2023-01-25 15:10:45.053 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:10:45.777 [update notice] received read 700 HolidayStartPeriod QQ=00: 01.01.2015 2023-01-25 15:10:46.493 [update notice] received read 700 Time QQ=00: 15:07:55 2023-01-25 15:10:47.206 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:10:47.935 [update notice] received read 700 Hc2FlowTemp QQ=00: 18.25 2023-01-25 15:10:48.058 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:10:48.621 [main error] scan config 35: ERR: arbitration lost 2023-01-25 15:10:48.711 [update notice] received read 700 Hc2PumpStatus QQ=00: 0 2023-01-25 15:10:49.418 [update notice] received read 700 Hc2AutoOffMode QQ=00: night 2023-01-25 15:10:49.538 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002901c87d00 2023-01-25 15:10:50.201 [update notice] received unknown MS cmd: 0015b52406020002010600 / 050202060000 2023-01-25 15:10:50.942 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-25 15:10:51.047 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:51.215 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.215 [update notice] store 52 ident: done 2023-01-25 15:10:51.215 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.215 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.923 [update notice] received unknown MS cmd: 0015b52406020003011c00 / 0501031c0001 2023-01-25 15:10:52.008 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:10:52.660 [update notice] received read 700 z2SFMode QQ=00: auto 2023-01-25 15:10:53.377 [update notice] received read 700 z2RoomTemp QQ=00: 18.5 2023-01-25 15:10:53.479 [update notice] received unknown MS cmd: 1008b5040100 / 0a00ffffffffffffffa008 2023-01-25 15:10:54.048 [main error] scan config 52: ERR: arbitration lost 2023-01-25 15:10:54.156 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-25 15:10:54.873 [update notice] received read 700 z2Name2 QQ=00: A 1
2023-01-25 15:10:54.934 [update notice] received update-read broadcast vdatetime QQ=10: 15:07:56;25.01.2023 2023-01-25 15:10:55.649 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:10:55.780 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:58.160 [update notice] received unknown MS cmd: 1008b5110100 / 08fd000a001f100000 2023-01-25 15:10:58.886 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:10:58.993 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:59.100 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:11:00.341 [update notice] received poll-read 700 z2QuickVetoTemp QQ=00: 23 2023-01-25 15:11:00.426 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:01.093 [update notice] received poll-read 700 z2OpModeCooling QQ=00: auto 2023-01-25 15:11:01.802 [update notice] received unknown MS cmd: 0015b52406020003011900 / 050103190000 2023-01-25 15:11:01.929 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002701c87d00 2023-01-25 15:11:02.614 [update notice] received poll-read 700 z2ActualRoomTempDesired QQ=00: 5 2023-01-25 15:11:02.793 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-25 15:11:02.793 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:11:02.906 [update notice] received poll-read 700 z2CoolingTemp QQ=00: 24 2023-01-25 15:11:02.949 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:11:03.674 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:11:03.814 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:03.930 [update notice] received unknown MS cmd: 0015b52406020003011b00 / 0601031b000000 2023-01-25 15:11:05.148 [update notice] received read 700 Time QQ=00: 15:08:14 2023-01-25 15:11:05.232 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:11:05.916 [update notice] received poll-read 700 Hc1FlowTemp QQ=00: 14.125 2023-01-25 15:11:06.632 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:11:06.697 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:07.376 [update notice] received poll-read 700 Hc1PumpStatus QQ=00: 0 2023-01-25 15:11:08.065 [update notice] received poll-read 700 Hc1AutoOffMode QQ=00: night 2023-01-25 15:11:08.133 [update notice] received unknown MS cmd: 1008b5100305ff01 / 0101 2023-01-25 15:11:08.704 [main error] scan config 08: ERR: arbitration lost 2023-01-25 15:11:08.790 [update notice] received unknown MS cmd: 0015b52406020002000600 / 050202060000 2023-01-25 15:11:09.505 [update notice] received read 700 Date QQ=00: 25.01.2023 2023-01-25 15:11:09.576 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:10.249 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:11:10.975 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:11:11.067 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:11.271 [update notice] sent unknown MS cmd: 3135b5090124 / 09003231313930393030 2023-01-25 15:11:11.378 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:11:12.190 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-25 15:11:12.301 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:11:12.422 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e1002301c87d00 2023-01-25 15:11:12.754 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-25 15:11:12.883 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-25 15:11:13.505 [update notice] received unknown MS cmd: 1008b512020064 / 00 2023-01-25 15:11:13.594 [update notice] received unknown MS cmd: 0006b50903290500 / 050500400400 2023-01-25 15:11:14.342 [update notice] sent scan-read scan.35 id QQ=31: 21;19;09;0020171335;0082;005106;N5 2023-01-25 15:11:14.342 [bus notice] scan 35: ;21;19;09;0020171335;0082;005106;N5 2023-01-25 15:11:14.344 [main error] unable to load scan config 35: no file from vaillant with prefix 35 matches ID "vr_91", SW0415, HW4803 2023-01-25 15:11:14.344 [main error] scan config 35: ERR: element not found 2023-01-25 15:11:14.477 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:11:14.542 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:15.278 [update notice] received unknown MS cmd: 0015b52406020003001c00 / 0501031c0000 2023-01-25 15:11:15.407 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:11:16.111 [update notice] received poll-read 700 z1SFMode QQ=00: auto 2023-01-25 15:11:16.227 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:17.006 [update notice] sent unknown MS cmd: 3152b5090124 / 09003231313835303030 2023-01-25 15:11:17.177 [update notice] received unknown MS cmd: 1008b5120204ff / 0101 2023-01-25 15:11:17.961 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-25 15:11:18.041 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:18.775 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-25 15:11:19.501 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:11:19.594 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:20.359 [update notice] sent scan-read scan.52 id QQ=31: 21;18;50;00????????;????;??????;?5 2023-01-25 15:11:20.360 [bus notice] scan 52: ;21;18;50;00????????;????;??????;?5 2023-01-25 15:11:20.363 [main notice] read scan config file vaillant/52.vr_70.csv for ID "vr_70", SW0109, HW2903 2023-01-25 15:11:20.364 [main notice] found messages: 537 (0 conditional on 0 conditions, 118 poll, 8 update) 2023-01-25 15:11:20.579 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:11:21.295 [update notice] received poll-read 700 z1RoomTemp QQ=00: 20.9375 2023-01-25 15:11:21.411 [update notice] received unknown MS cmd: 1008b513020508 / 00 2023-01-25 15:11:21.522 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:11:22.773 [update notice] received read 700 z1Name2 QQ=00: A 2
2023-01-25 15:11:22.870 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:23.014 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:11:23.723 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:11:23.810 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:24.490 [update notice] received poll-read 700 z1OpModeCooling QQ=00: auto 2023-01-25 15:11:25.192 [update notice] received unknown MS cmd: 0015b52406020003001900 / 050103190000 2023-01-25 15:11:25.271 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:25.944 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:11:26.658 [update notice] received poll-read 700 z1QuickVetoTemp QQ=00: 26 2023-01-25 15:11:26.699 [update notice] received unknown BC cmd: 10feb510020601 2023-01-25 15:11:27.368 [update notice] received poll-read 700 z1CoolingTemp QQ=00: 24 2023-01-25 15:11:28.082 [update notice] received poll-read 700 z1ActualRoomTempDesired QQ=00: 18.5 2023-01-25 15:11:28.163 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:11:28.831 [update notice] received unknown MS cmd: 0015b52406020003001b00 / 0601031b000000 2023-01-25 15:11:29.546 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:11:29.641 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:30.328 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:11:31.043 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:11:31.169 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.19;18.62;c8 7d 00 2023-01-25 15:11:31.835 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:11:32.540 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-25 15:11:32.640 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:32.774 [update notice] sent unknown MS cmd: 3108b5090124 / 09003231313931393030 2023-01-25 15:11:33.505 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-25 15:11:33.581 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:34.233 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-25 15:11:34.920 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:35.025 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-25 15:11:35.734 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-25 15:11:35.839 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:11:35.915 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:36.098 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-25 15:11:36.922 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-25 15:11:36.922 [bus notice] scan 08: ;21;19;19;0010021819;0001;005340;N4 2023-01-25 15:11:36.928 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0205, HW9602 2023-01-25 15:11:36.952 [main notice] found messages: 720 (2 conditional on 27 conditions, 118 poll, 10 update) 2023-01-25 15:11:37.634 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:11:39.481 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:11:39.603 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.38;c8 7d 00 2023-01-25 15:11:40.274 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:11:40.965 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:11:41.060 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:11:42.450 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:11:43.156 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:11:43.242 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:43.914 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:11:44.632 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:11:44.705 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:45.384 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:11:46.095 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:11:46.821 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:11:47.555 [update notice] received read 700 z1Name2 QQ=00: A 2
2023-01-25 15:11:47.649 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:11:48.328 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-25 15:11:49.060 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.19;c8 7d 00 2023-01-25 15:11:49.174 [update notice] received read 700 z2Name2 QQ=00: A 1
2023-01-25 15:11:50.965 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:11:52.812 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:11:54.679 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-25 15:11:56.498 [update notice] received update-read broadcast vdatetime QQ=10: 15:08:56;25.01.2023 2023-01-25 15:11:57.756 [update notice] received unknown MS cmd: 3015b5240a06010a010f000080a741 / 02000a 2023-01-25 15:11:57.839 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 023-01-25 15:11:59.677 [update notice] received unknown MS cmd: 3015b5240a06010a01070000001842 / 02000a 2023-01-25 15:11:59.764 [update notice] received unknown MS cmd: 1008b5110100 / 08fd000a001f100000 2023-01-25 15:12:01.592 [update notice] received unknown MS cmd: 3015b5240108 / 080000030108012530 2023-01-25 15:12:01.665 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:04.076 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:05.945 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.50;c8 7d 00 2023-01-25 15:12:07.722 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:12:09.618 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:11.477 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:13.302 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:15.144 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:17.058 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:18.930 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.06;c8 7d 00 2023-01-25 15:12:20.756 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:12:22.650 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:25.209 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:27.075 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:28.943 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:12:30.782 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:32.615 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:34.448 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:36.358 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.19;18.62;c8 7d 00 2023-01-25 15:12:38.206 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:40.057 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:41.908 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:42.096 [bus notice] scan ec: ;Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.096 [update notice] store ec ident: done 2023-01-25 15:12:42.096 [update notice] sent scan-read scan.ec QQ=31: Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.096 [bus notice] scan ec: ;Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.348 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.348 [update notice] store ed ident: done 2023-01-25 15:12:42.348 [update notice] sent scan-read scan.ed QQ=31: Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.348 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.428 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:44.841 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:46.714 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.38;c8 7d 00 2023-01-25 15:12:48.584 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-25 15:12:48.680 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:49.348 [update notice] received read 700 Time QQ=00: 15:09:58 2023-01-25 15:12:49.529 [update notice] sent unknown MS cmd: 31ecb5090124 / 09003231313930323030 2023-01-25 15:12:49.618 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:12:50.296 [update notice] received read 700 Date QQ=00: 25.01.2023 2023-01-25 15:12:50.497 [update notice] sent scan-read scan.ec id QQ=31: 2023-01-25 15:12:50.594 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:50.750 [update notice] sent scan-read scan.ec id QQ=31: 2023-01-25 15:12:50.875 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-25 15:12:51.025 [update notice] sent scan-read scan.ec id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-25 15:12:51.025 [bus notice] scan ec: ;21;19;02;0020171318;0082;005145;N5 2023-01-25 15:12:51.039 [main notice] read scan config file vaillant/ec.sol.sc.csv for ID "sol00", SW0613, HW6903 2023-01-25 15:12:51.098 [main notice] found messages: 796 (2 conditional on 27 conditions, 186 poll, 10 update) 2023-01-25 15:12:51.157 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:51.320 [update notice] sent poll-read sc YieldThisYear QQ=31: 2023-01-25 15:12:51.489 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:12:51.490 [bus error] poll sc YieldThisYear failed: ERR: SYN received 2023-01-25 15:12:51.789 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:51.882 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:12:52.105 [update notice] received unknown MS cmd: 1008b5110100 / 08fb000a001f100000 2023-01-25 15:12:52.339 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:12:52.442 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:52.726 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.06;c8 7d 00 2023-01-25 15:12:52.843 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:12:53.061 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:53.305 [update notice] sent unknown MS cmd: 31edb5090124 / 09003231313931333030 2023-01-25 15:12:53.409 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:12:53.450 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:12:53.676 [update notice] sent scan-read scan.ed id QQ=31: 2023-01-25 15:12:53.892 [update notice] sent scan-read scan.ed id QQ=31: 2023-01-25 15:12:54.036 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-25 15:12:54.202 [update notice] sent scan-read scan.ed id QQ=31: 21;19;13;0010017718;3110;002717;N6 2023-01-25 15:12:54.203 [bus notice] scan ed: ;21;19;13;0010017718;3110;002717;N6 2023-01-25 15:12:54.205 [main error] unable to load scan config ed: no file from vaillant with prefix ed matches ID "vmd01", SW0108, HW1703 2023-01-25 15:12:54.205 [main error] scan config ed: ERR: element not found 2023-01-25 15:12:54.311 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-25 15:12:54.467 [update notice] received update-read broadcast vdatetime QQ=10: 15:09:56;25.01.2023 2023-01-25 15:12:54.777 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:54.969 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:55.063 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-25 15:12:55.267 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:57.847 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:58.161 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:12:58.279 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-25 15:12:58.463 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:58.743 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-25 15:12:59.091 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:59.277 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:12:59.406 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:59.841 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:13:00.284 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:13:00.728 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:13:01.211 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:13:02.065 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:13:02.518 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:13:02.969 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:13:03.426 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:13:03.918 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:13:04.424 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:13:05.232 [update notice] received read 700 z1Name2 QQ=00: A 2

[pagaille]

That’s not the right csv. Mine only defines 4 temperature sensors and some other fields. 

[Strobistar]

Hi Mathieu,

that's true, I wanted to make sure first that the VMD is picked up. And that's now the case. So now the finetuning: that 06.pms.csv did not contain all correct parameters, so please edit your 06.vmd.csv and remote all "NtcXSensor" lines and add the following lines - then you got the important temperature sensors (T1-T5-T6-T7).

r,,Ntc1Sensor,NTC 1 Sensor,,,,"0500",,,tempsensor,,,Temperature in solar flow (from solar collector) T5 r,,Ntc3Sensor,NTC 3 Sensor,,,,"0C00",,,tempsensor,,,Temperature on top of buffer T7 r,,Ntc5Sensor,NTC 5 Sensor,,,,"0700",,,tempsensor,,,Temperature in buffer flow (to buffer) T1 r,,Ntc6Sensor,NTC 6 Sensor,,,,"A100",,,tempsensor,,,Temperature in middle T6

Good luck!

On Wed, Jan 25, 2023 at 4:45 PM Matthieu @.***> wrote:

That’s not the right csv. Mine only defines 4 temperature sensors and some other fields. Matthieu G. (en mode mobile)Le 25 janv. 2023 à 15:52, Wassman2020 @.***> a écrit : Hi. I changed the parameters and now stating to show new fields and new devices in the bus.

s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started

ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=eehohWeiZoo6Ahchai8oog8eej4vaep1ri3acaeCoo2Iath0kahjoo5Kahhahf6o --mqttjson --lograwdata --configpath=config/ebusd --latency=5000 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --lograwdatafile=/config/ebus/raw.log --lograwdatasize=500 --device=enh: 192.168.2.32:9999 --log=all:notice --log=main:notice --log=bus:notice --log=update:notice --log=network:notice --log=other:notice --enablehex --scanconfig=full --pollinterval=180 --acquiretimeout=15000 2023-01-25 15:10:06.222 [main notice] ebusd 23.1.p20230106 started with full scan on enhanced device 192.168.2.32:9999 2023-01-25 15:10:06.262 [bus notice] device status: resetting 2023-01-25 15:10:06.263 [bus notice] bus started with own address 31/36 2023-01-25 15:10:06.280 [bus notice] signal acquired 2023-01-25 15:10:06.400 [bus notice] device status: reset, supports info 2023-01-25 15:10:06.490 [bus notice] device status: extra info: firmware 1.1[7f16].2[73c8], jumpers 0x3b 2023-01-25 15:10:06.791 [mqtt notice] connection established 2023-01-25 15:10:07.263 [bus notice] new master 10, master count 2 2023-01-25 15:10:07.319 [bus notice] new master 03, master count 3 2023-01-25 15:10:07.319 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:07.614 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e1002201c87d00 2023-01-25 15:10:07.883 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:08.533 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:08.780 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:15.127 [bus notice] new master 00, master count 4 2023-01-25 15:10:15.196 [update notice] received unknown MS cmd: 0008b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:15.560 [update notice] received unknown MS cmd: 0008b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:15.926 [update notice] received unknown MS cmd: 0008b503020004 / 0affffffffffffffffffff 2023-01-25 15:10:16.272 [main notice] starting initial full scan 2023-01-25 15:10:16.384 [update notice] received unknown MS cmd: 0015b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:17.644 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:17.721 [update notice] received unknown MS cmd: 0015b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:17.869 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-25 15:10:17.869 [update notice] store 05 ident: done 2023-01-25 15:10:17.869 [update notice] sent scan-read scan.05 QQ=31: Vaillant;VR920;2706;5703 2023-01-25 15:10:17.870 [bus notice] scan 05: ;Vaillant;VR920;2706;5703 2023-01-25 15:10:18.107 [bus notice] new master 01, master count 5 2023-01-25 15:10:18.107 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.107 [update notice] store 06 ident: done 2023-01-25 15:10:18.107 [update notice] sent scan-read scan.06 QQ=31: Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.107 [bus notice] scan 06: ;Vaillant;VMD01;0108;1703 2023-01-25 15:10:18.240 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e3002a01c87d00 2023-01-25 15:10:18.375 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-25 15:10:18.375 [update notice] store 08 ident: done 2023-01-25 15:10:18.375 [update notice] sent scan-read scan.08 QQ=31: Vaillant;BAI00;0205;9602 2023-01-25 15:10:18.375 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602 2023-01-25 15:10:19.689 [bus notice] new master 30, master count 6 2023-01-25 15:10:19.689 [update notice] received unknown MS cmd: 0035b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:19.782 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:20.508 [update notice] received unknown MS cmd: 0035b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:21.222 [update notice] received unknown MS cmd: 0006b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:21.307 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:10:22.005 [update notice] received unknown MS cmd: 0052b503020001 / 0affffffffffffffffffff 2023-01-25 15:10:22.752 [update notice] received unknown MS cmd: 0052b503020002 / 0affffffffffffffffffff 2023-01-25 15:10:22.801 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:23.493 [update notice] received unknown MS cmd: 0052b503020004 / 0affffffffffffffffffff 2023-01-25 15:10:24.171 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:24.362 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-25 15:10:24.362 [update notice] store 15 ident: done 2023-01-25 15:10:24.362 [update notice] sent scan-read scan.15 QQ=31: Vaillant;70000;0613;6903 2023-01-25 15:10:24.362 [bus notice] scan 15: ;Vaillant;70000;0613;6903 2023-01-25 15:10:26.275 [main error] unable to load scan config 05: no file from vaillant with prefix 05 matches ID "vr920", SW2706, HW5703 2023-01-25 15:10:26.276 [main error] scan config 05: ERR: element not found 2023-01-25 15:10:27.379 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:28.289 [main notice] read common config file vaillant/general.csv 2023-01-25 15:10:28.290 [main notice] read common config file vaillant/scan.csv 2023-01-25 15:10:28.291 [main notice] read common config file vaillant/0_quitar_ed.vmd.csv 2023-01-25 15:10:28.292 [main notice] read common config file vaillant/broadcast.csv 2023-01-25 15:10:28.297 [main notice] read scan config file vaillant/06.vmd.csv for ID "vmd01", SW0108, HW1703 2023-01-25 15:10:28.298 [main notice] found messages: 87 (0 conditional on 0 conditions, 0 poll, 8 update) 2023-01-25 15:10:29.225 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002401c87d00 2023-01-25 15:10:29.968 [update notice] sent unknown MS cmd: 3106b5090124 / 09003231313931333030 2023-01-25 15:10:30.679 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:31.471 [update notice] sent scan-read scan.06 id QQ=31: 2023-01-25 15:10:31.608 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:31.850 [update notice] sent scan-read scan.06 id QQ=31: 2023-01-25 15:10:32.561 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:33.350 [update notice] sent scan-read scan.06 id QQ=31: 21;19;13;0010017718;3110;002717;N6 2023-01-25 15:10:33.350 [bus notice] scan 06: ;21;19;13;0010017718;3110;002717;N6 2023-01-25 15:10:36.357 [update notice] received unknown MS cmd: 0015b52406020000004300 / 06020043000000 2023-01-25 15:10:37.071 [update notice] received unknown MS cmd: 0015b52406020000003400 / 0703003400190117 2023-01-25 15:10:37.794 [update notice] received unknown MS cmd: 0015b52406020000008200 / 08030082000000a040 2023-01-25 15:10:37.885 [update notice] received unknown MS cmd: 1008b5110101 / 091f20a008ff200000ff 2023-01-25 15:10:38.476 [main error] scan config 08: ERR: arbitration lost 2023-01-25 15:10:38.559 [update notice] received unknown MS cmd: 0015b52406020000009000 / 050100900000 2023-01-25 15:10:39.287 [update notice] received unknown MS cmd: 0015b52406020000000600 / 06020006000000 2023-01-25 15:10:39.411 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002401c87d00 2023-01-25 15:10:40.077 [update notice] received unknown MS cmd: 0015b52406020000003900 / 08010039000000803f 2023-01-25 15:10:40.784 [update notice] received unknown MS cmd: 0015b52406020000004200 / 06020042000000 2023-01-25 15:10:40.879 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:41.035 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231313930323030 2023-01-25 15:10:41.148 [update notice] received unknown MS cmd: 0015b52406020000004b00 / 0801004b0000006241 2023-01-25 15:10:41.870 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-25 15:10:41.971 [update notice] received unknown MS cmd: 0015b52406020000007400 / 050300740000 2023-01-25 15:10:42.056 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:42.197 [update notice] received unknown MS cmd: 0015b52406020000007800 / 06030078000000 2023-01-25 15:10:42.908 [update notice] received unknown MS cmd: 0015b52406020000006900 / 06030069000200 2023-01-25 15:10:42.977 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:43.129 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.129 [update notice] store 35 ident: done 2023-01-25 15:10:43.129 [update notice] sent scan-read scan.35 QQ=31: Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.129 [bus notice] scan 35: ;Vaillant;VR_91;0415;4803 2023-01-25 15:10:43.232 [update notice] received unknown MS cmd: 0015b52406020000001600 / 06020016000100 2023-01-25 15:10:43.362 [update notice] sent scan-read scan.15 id QQ=31: 2023-01-25 15:10:43.526 [update notice] received unknown MS cmd: 0015b52406020000007300 / 080100730000000a41 2023-01-25 15:10:43.706 [update notice] sent scan-read scan.15 id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-25 15:10:43.706 [bus notice] scan 15: ;21;19;02;0020171318;0082;005145;N5 2023-01-25 15:10:43.744 [main notice] read scan config file vaillant/15.700.csv for ID "70000", SW0613, HW6903 2023-01-25 15:10:43.745 [main notice] found messages: 527 (0 conditional on 0 conditions, 25 poll, 8 update) 2023-01-25 15:10:43.820 [update notice] received read 700 HolidayEndPeriod QQ=00: 01.01.2015 2023-01-25 15:10:44.068 [bus notice] max. symbols per second: 140 2023-01-25 15:10:45.053 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:10:45.777 [update notice] received read 700 HolidayStartPeriod QQ=00: 01.01.2015 2023-01-25 15:10:46.493 [update notice] received read 700 Time QQ=00: 15:07:55 2023-01-25 15:10:47.206 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:10:47.935 [update notice] received read 700 Hc2FlowTemp QQ=00: 18.25 2023-01-25 15:10:48.058 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:10:48.621 [main error] scan config 35: ERR: arbitration lost 2023-01-25 15:10:48.711 [update notice] received read 700 Hc2PumpStatus QQ=00: 0 2023-01-25 15:10:49.418 [update notice] received read 700 Hc2AutoOffMode QQ=00: night 2023-01-25 15:10:49.538 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002901c87d00 2023-01-25 15:10:50.201 [update notice] received unknown MS cmd: 0015b52406020002010600 / 050202060000 2023-01-25 15:10:50.942 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-25 15:10:51.047 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:10:51.215 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.215 [update notice] store 52 ident: done 2023-01-25 15:10:51.215 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.215 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:10:51.923 [update notice] received unknown MS cmd: 0015b52406020003011c00 / 0501031c0001 2023-01-25 15:10:52.008 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:10:52.660 [update notice] received read 700 z2SFMode QQ=00: auto 2023-01-25 15:10:53.377 [update notice] received read 700 z2RoomTemp QQ=00: 18.5 2023-01-25 15:10:53.479 [update notice] received unknown MS cmd: 1008b5040100 / 0a00ffffffffffffffa008 2023-01-25 15:10:54.048 [main error] scan config 52: ERR: arbitration lost 2023-01-25 15:10:54.156 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-25 15:10:54.873 [update notice] received read 700 z2Name2 QQ=00: A 1 2023-01-25 15:10:54.934 [update notice] received update-read broadcast vdatetime QQ=10: 15:07:56;25.01.2023 2023-01-25 15:10:55.649 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:10:55.780 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:10:58.160 [update notice] received unknown MS cmd: 1008b5110100 / 08fd000a001f100000 2023-01-25 15:10:58.886 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:10:58.993 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:10:59.100 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:11:00.341 [update notice] received poll-read 700 z2QuickVetoTemp QQ=00: 23 2023-01-25 15:11:00.426 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:01.093 [update notice] received poll-read 700 z2OpModeCooling QQ=00: auto 2023-01-25 15:11:01.802 [update notice] received unknown MS cmd: 0015b52406020003011900 / 050103190000 2023-01-25 15:11:01.929 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e2002701c87d00 2023-01-25 15:11:02.614 [update notice] received poll-read 700 z2ActualRoomTempDesired QQ=00: 5 2023-01-25 15:11:02.793 [update notice] sent scan-read scan.52 QQ=31: Vaillant;VR_70;0109;2903 2023-01-25 15:11:02.793 [bus notice] scan 52: ;Vaillant;VR_70;0109;2903 2023-01-25 15:11:02.906 [update notice] received poll-read 700 z2CoolingTemp QQ=00: 24 2023-01-25 15:11:02.949 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:11:03.674 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:11:03.814 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:03.930 [update notice] received unknown MS cmd: 0015b52406020003011b00 / 0601031b000000 2023-01-25 15:11:05.148 [update notice] received read 700 Time QQ=00: 15:08:14 2023-01-25 15:11:05.232 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:11:05.916 [update notice] received poll-read 700 Hc1FlowTemp QQ=00: 14.125 2023-01-25 15:11:06.632 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:11:06.697 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:07.376 [update notice] received poll-read 700 Hc1PumpStatus QQ=00: 0 2023-01-25 15:11:08.065 [update notice] received poll-read 700 Hc1AutoOffMode QQ=00: night 2023-01-25 15:11:08.133 [update notice] received unknown MS cmd: 1008b5100305ff01 / 0101 2023-01-25 15:11:08.704 [main error] scan config 08: ERR: arbitration lost 2023-01-25 15:11:08.790 [update notice] received unknown MS cmd: 0015b52406020002000600 / 050202060000 2023-01-25 15:11:09.505 [update notice] received read 700 Date QQ=00: 25.01.2023 2023-01-25 15:11:09.576 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:10.249 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:11:10.975 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:11:11.067 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:11.271 [update notice] sent unknown MS cmd: 3135b5090124 / 09003231313930393030 2023-01-25 15:11:11.378 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:11:12.190 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-25 15:11:12.301 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:11:12.422 [update notice] received unknown MS cmd: 1052b5230103 / 0f0080008000800080e1002301c87d00 2023-01-25 15:11:12.754 [update notice] sent scan-read scan.35 id QQ=31: 2023-01-25 15:11:12.883 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-25 15:11:13.505 [update notice] received unknown MS cmd: 1008b512020064 / 00 2023-01-25 15:11:13.594 [update notice] received unknown MS cmd: 0006b50903290500 / 050500400400 2023-01-25 15:11:14.342 [update notice] sent scan-read scan.35 id QQ=31: 21;19;09;0020171335;0082;005106;N5 2023-01-25 15:11:14.342 [bus notice] scan 35: ;21;19;09;0020171335;0082;005106;N5 2023-01-25 15:11:14.344 [main error] unable to load scan config 35: no file from vaillant with prefix 35 matches ID "vr_91", SW0415, HW4803 2023-01-25 15:11:14.344 [main error] scan config 35: ERR: element not found 2023-01-25 15:11:14.477 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:11:14.542 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:15.278 [update notice] received unknown MS cmd: 0015b52406020003001c00 / 0501031c0000 2023-01-25 15:11:15.407 [update notice] received unknown MS cmd: 1052b523080100ff0000ffff00 / 0101 2023-01-25 15:11:16.111 [update notice] received poll-read 700 z1SFMode QQ=00: auto 2023-01-25 15:11:16.227 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:17.006 [update notice] sent unknown MS cmd: 3152b5090124 / 09003231313835303030 2023-01-25 15:11:17.177 [update notice] received unknown MS cmd: 1008b5120204ff / 0101 2023-01-25 15:11:17.961 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-25 15:11:18.041 [update notice] received unknown MS cmd: 1052b5230402010000 / 02019c 2023-01-25 15:11:18.775 [update notice] sent scan-read scan.52 id QQ=31: 2023-01-25 15:11:19.501 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:11:19.594 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:20.359 [update notice] sent scan-read scan.52 id QQ=31: 21;18;50;00????????;????;??????;?5 2023-01-25 15:11:20.360 [bus notice] scan 52: ;21;18;50;00????????;????;??????;?5 2023-01-25 15:11:20.363 [main notice] read scan config file vaillant/52.vr_70.csv for ID "vr_70", SW0109, HW2903 2023-01-25 15:11:20.364 [main notice] found messages: 537 (0 conditional on 0 conditions, 118 poll, 8 update) 2023-01-25 15:11:20.579 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:11:21.295 [update notice] received poll-read 700 z1RoomTemp QQ=00: 20.9375 2023-01-25 15:11:21.411 [update notice] received unknown MS cmd: 1008b513020508 / 00 2023-01-25 15:11:21.522 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:11:22.773 [update notice] received read 700 z1Name2 QQ=00: A 2 2023-01-25 15:11:22.870 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:23.014 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:11:23.723 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:11:23.810 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:24.490 [update notice] received poll-read 700 z1OpModeCooling QQ=00: auto 2023-01-25 15:11:25.192 [update notice] received unknown MS cmd: 0015b52406020003001900 / 050103190000 2023-01-25 15:11:25.271 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:25.944 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:11:26.658 [update notice] received poll-read 700 z1QuickVetoTemp QQ=00: 26 2023-01-25 15:11:26.699 [update notice] received unknown BC cmd: 10feb510020601 2023-01-25 15:11:27.368 [update notice] received poll-read 700 z1CoolingTemp QQ=00: 24 2023-01-25 15:11:28.082 [update notice] received poll-read 700 z1ActualRoomTempDesired QQ=00: 18.5 2023-01-25 15:11:28.163 [update notice] received unknown MS cmd: 1008b5110102 / 06013c96468282 2023-01-25 15:11:28.831 [update notice] received unknown MS cmd: 0015b52406020003001b00 / 0601031b000000 2023-01-25 15:11:29.546 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:11:29.641 [update notice] received unknown MS cmd: 1008b5110101 / 091f1fa008ff200000ff 2023-01-25 15:11:30.328 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:11:31.043 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:11:31.169 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.19;18.62;c8 7d 00 2023-01-25 15:11:31.835 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:11:32.540 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-25 15:11:32.640 [update notice] received unknown MS cmd: 1008b51009000000ffffff050000 / 0101 2023-01-25 15:11:32.774 [update notice] sent unknown MS cmd: 3108b5090124 / 09003231313931393030 2023-01-25 15:11:33.505 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-25 15:11:33.581 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:34.233 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-25 15:11:34.920 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:35.025 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-25 15:11:35.734 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-25 15:11:35.839 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:11:35.915 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:36.098 [update notice] sent scan-read scan.08 id QQ=31: 2023-01-25 15:11:36.922 [update notice] sent scan-read scan.08 id QQ=31: 21;19;19;0010021819;0001;005340;N4 2023-01-25 15:11:36.922 [bus notice] scan 08: ;21;19;19;0010021819;0001;005340;N4 2023-01-25 15:11:36.928 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0205, HW9602 2023-01-25 15:11:36.952 [main notice] found messages: 720 (2 conditional on 27 conditions, 118 poll, 10 update) 2023-01-25 15:11:37.634 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:11:39.481 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:11:39.603 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.38;c8 7d 00 2023-01-25 15:11:40.274 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:11:40.965 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:11:41.060 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:11:42.450 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:11:43.156 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:11:43.242 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:11:43.914 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:11:44.632 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:11:44.705 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:11:45.384 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:11:46.095 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:11:46.821 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:11:47.555 [update notice] received read 700 z1Name2 QQ=00: A 2 2023-01-25 15:11:47.649 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:11:48.328 [update notice] received read 700 z2Name1 QQ=00: PLANT 2023-01-25 15:11:49.060 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.19;c8 7d 00 2023-01-25 15:11:49.174 [update notice] received read 700 z2Name2 QQ=00: A 1 2023-01-25 15:11:50.965 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:11:52.812 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:11:54.679 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-25 15:11:56.498 [update notice] received update-read broadcast vdatetime QQ=10: 15:08:56;25.01.2023 2023-01-25 15:11:57.756 [update notice] received unknown MS cmd: 3015b5240a06010a010f000080a741 / 02000a 2023-01-25 15:11:57.839 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 023-01-25 15:11:59.677 [update notice] received unknown MS cmd: 3015b5240a06010a01070000001842 / 02000a 2023-01-25 15:11:59.764 [update notice] received unknown MS cmd: 1008b5110100 / 08fd000a001f100000 2023-01-25 15:12:01.592 [update notice] received unknown MS cmd: 3015b5240108 / 080000030108012530 2023-01-25 15:12:01.665 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:04.076 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:05.945 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.50;c8 7d 00 2023-01-25 15:12:07.722 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:12:09.618 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:11.477 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:13.302 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:15.144 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:17.058 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:18.930 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.06;c8 7d 00 2023-01-25 15:12:20.756 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:12:22.650 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:25.209 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:27.075 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:28.943 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:12:30.782 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:32.615 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:34.448 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:36.358 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.19;18.62;c8 7d 00 2023-01-25 15:12:38.206 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:40.057 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:41.908 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:42.096 [bus notice] scan ec: ;Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.096 [update notice] store ec ident: done 2023-01-25 15:12:42.096 [update notice] sent scan-read scan.ec QQ=31: Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.096 [bus notice] scan ec: ;Vaillant;SOL00;0613;6903 2023-01-25 15:12:42.348 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.348 [update notice] store ed ident: done 2023-01-25 15:12:42.348 [update notice] sent scan-read scan.ed QQ=31: Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.348 [bus notice] scan ed: ;Vaillant;VMD01;0108;1703 2023-01-25 15:12:42.428 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:44.841 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:46.714 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.38;c8 7d 00 2023-01-25 15:12:48.584 [update notice] received unknown MS cmd: 0015b52406020000004800 / 06010048000000 2023-01-25 15:12:48.680 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:49.348 [update notice] received read 700 Time QQ=00: 15:09:58 2023-01-25 15:12:49.529 [update notice] sent unknown MS cmd: 31ecb5090124 / 09003231313930323030 2023-01-25 15:12:49.618 [update notice] received poll-read bai Status02 QQ=10: on;60;75.0;70;65.0 2023-01-25 15:12:50.296 [update notice] received read 700 Date QQ=00: 25.01.2023 2023-01-25 15:12:50.497 [update notice] sent scan-read scan.ec id QQ=31: 2023-01-25 15:12:50.594 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:50.750 [update notice] sent scan-read scan.ec id QQ=31: 2023-01-25 15:12:50.875 [update notice] received poll-read 700 DisplayedOutsideTemp QQ=00: 8.625 2023-01-25 15:12:51.025 [update notice] sent scan-read scan.ec id QQ=31: 21;19;02;0020171318;0082;005145;N5 2023-01-25 15:12:51.025 [bus notice] scan ec: ;21;19;02;0020171318;0082;005145;N5 2023-01-25 15:12:51.039 [main notice] read scan config file vaillant/ec.sol.sc.csv for ID "sol00", SW0613, HW6903 2023-01-25 15:12:51.098 [main notice] found messages: 796 (2 conditional on 27 conditions, 186 poll, 10 update) 2023-01-25 15:12:51.157 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:51.320 [update notice] sent poll-read sc YieldThisYear QQ=31: 2023-01-25 15:12:51.489 [update notice] received read 700 GlobalSystemOff QQ=00: no 2023-01-25 15:12:51.490 [bus error] poll sc YieldThisYear failed: ERR: SYN received 2023-01-25 15:12:51.789 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:51.882 [update notice] received poll-read 700 HwcSFMode QQ=00: auto 2023-01-25 15:12:52.105 [update notice] received unknown MS cmd: 1008b5110100 / 08fb000a001f100000 2023-01-25 15:12:52.339 [update notice] received poll-read 700 HwcStorageTemp QQ=00: 16 2023-01-25 15:12:52.442 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:52.726 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.06;18.06;c8 7d 00 2023-01-25 15:12:52.843 [update notice] received poll-read 700 HwcTempDesired QQ=00: 65 2023-01-25 15:12:53.061 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:53.305 [update notice] sent unknown MS cmd: 31edb5090124 / 09003231313931333030 2023-01-25 15:12:53.409 [update notice] received poll-read 700 HwcOpMode QQ=00: auto 2023-01-25 15:12:53.450 [update notice] received update-read broadcast outsidetemp QQ=10: 8.625 2023-01-25 15:12:53.676 [update notice] sent scan-read scan.ed id QQ=31: 2023-01-25 15:12:53.892 [update notice] sent scan-read scan.ed id QQ=31: 2023-01-25 15:12:54.036 [update notice] received read bai DateTime QQ=10: nosignal;-:-:-;-.-.-;8.625 2023-01-25 15:12:54.202 [update notice] sent scan-read scan.ed id QQ=31: 21;19;13;0010017718;3110;002717;N6 2023-01-25 15:12:54.203 [bus notice] scan ed: ;21;19;13;0010017718;3110;002717;N6 2023-01-25 15:12:54.205 [main error] unable to load scan config ed: no file from vaillant with prefix ed matches ID "vmd01", SW0108, HW1703 2023-01-25 15:12:54.205 [main error] scan config ed: ERR: element not found 2023-01-25 15:12:54.311 [update notice] received unknown MS cmd: 0015b52406020001000100 / 06030101000100 2023-01-25 15:12:54.467 [update notice] received update-read broadcast vdatetime QQ=10: 15:09:56;25.01.2023 2023-01-25 15:12:54.777 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:54.969 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:55.063 [update notice] received unknown MS cmd: 0015b52406020001000f00 / 0601010f000000 2023-01-25 15:12:55.267 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:57.847 [update notice] received read bai Status01 QQ=10: 15.5;15.5;8.625;-;16.0;off 2023-01-25 15:12:58.161 [update notice] received read vr_70 SensorData QQ=10: -;-;-;-;14.12;18.31;c8 7d 00 2023-01-25 15:12:58.279 [update notice] received unknown MS cmd: 0015b5240602000000b600 / 050300b60000 2023-01-25 15:12:58.463 [update notice] received update-write bai SetMode QQ=10: auto;0.0;-;-;1;0;1;0;0;0 2023-01-25 15:12:58.743 [update notice] received unknown MS cmd: 0015b5240602000000a200 / 080200a20000002041 2023-01-25 15:12:59.091 [update notice] received write vr_70 SetActorState QQ=10: off;-;off;off;-;-;off 2023-01-25 15:12:59.277 [update notice] received read 700 Hc1CircuitType QQ=00: mixer 2023-01-25 15:12:59.406 [update notice] received write vr_70 Mc2FlowTempDesired QQ=10: off;0.0;on;-100 2023-01-25 15:12:59.841 [update notice] received read 700 Hc2CircuitType QQ=00: mixer 2023-01-25 15:13:00.284 [update notice] received unknown MS cmd: 0015b52406020003001100 / 050303110001 2023-01-25 15:13:00.728 [update notice] received unknown MS cmd: 0015b52406020003011100 / 050303110001 2023-01-25 15:13:01.211 [update notice] received poll-read 700 z1OpMode QQ=00: night 2023-01-25 15:13:02.065 [update notice] received poll-read 700 z2OpMode QQ=00: off 2023-01-25 15:13:02.518 [update notice] received poll-read 700 z1DayTemp QQ=00: 22 2023-01-25 15:13:02.969 [update notice] received poll-read 700 z2DayTemp QQ=00: 22 2023-01-25 15:13:03.426 [update notice] received poll-read 700 z1NightTemp QQ=00: 18.5 2023-01-25 15:13:03.918 [update notice] received poll-read 700 z2NightTemp QQ=00: 18.5 2023-01-25 15:13:04.424 [update notice] received read 700 z1Name1 QQ=00: PLANT 2023-01-25 15:13:05.232 [update notice] received read 700 z1Name2 QQ=00: A 2

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1403823673, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM65VYIYLXNAFJ63SBILWUFDCLANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[pagaille]

Sorry, there is some kind of confusion here. My file defines the following registers :

# type (r[1-9];w;u),circuit,name,[comment],[QQ],ZZ,PBSB,[ID],field1,part (m/s),datatypes/templates,divider/values,unit,comment
#,VMD01,VMS 8/D,0020071488 243,,,,,,,,,,
 *r,,,,,,"B509","0D",,,,,,
 *w,,,,,,"B509","0E",,,,,,
 *wi,#install,,,,,"B509","0E",,,,,,
# ##### Generell #####,,,,,,,,,,,,,
r,,T5,T5 Sensor,,,,"0500",,,tempsensor,,,Solar collector Temperature
r,,T1,T1 Sensor,,,,"0700",,,tempsensor,,,Temperature in solar back flow (from solar collector)
r,,T7,T7 Sensor,,,,"0C00",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values))
r,,PowerOnCounter,PowerOnCounter,,,,"1900",,,UIN,,, Power On Counter (in hours)
r,,T6,T6 Sensor,,,,"A100",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values))
 r;wi,,FlowRate,Volumenstrom,,,,"9E00",,,SIN,10,l/min,chosen flow rate of the collector pump (to calculate solar gain)

Don't know from where you picked that source but anyway.

[pagaille]

BTW T6 description is wrong 😊 Should be Temperature at the bottom of the tank.

T7 is a computed value to estimate the average temperature in the tank.

[Strobistar]

I'm pretty sure that's not true either. My VMD initially had a working T6 but lacked the "rooftop" T7 sensor. After Vaillant installed it, the value of T7 became "visible". Hence I updated my 06.vmd.csv that T7 is top temperature in the boiler.

On Wed, Jan 25, 2023 at 5:30 PM Matthieu @.***> wrote:

BTW T6 description is wrong 😊 Should be Temperature at the bottom of the tank.

T7 is a computed value to estimate the average temperature in the tank.

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1403889969, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM63AVPV2LEVRROFFE3LWUFIKZANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[pagaille]

There is no sensor "at the top". It is goes down at mid position. The value displayed by T7 doesn't reflect the actual measured temperature (verified with a second sensor and confirmed by Vaillant btw).

If T7 was really at the top it would almost always be high except when the tank is actually entirely cold (because of stratification). The fact that the value is continuously evolving shows clearly that it is a computed value that takes various parameters into account.

To be fair T6 isn’t exactly the "bottom tank temperature". That’s the solar circuit return (to the solar captors, after the heat exchanger) temperature, but can be assumed to bottom tank temperature when the pump is off. Same for T1 : it's the solar circuit temperature before the heat exchanger, at the middle of the tank. Likewise it can be assumed to be the mid tank temperature when the pump is off.

[Strobistar]

Agree on T1 and T6, however that Vaillant expert claimed T7 is an optional top sensor to be placed in slot 2:

But my ViH didn’t have it so he attached it to the anode under 5, hence my T7 is ‘real’ top temperature I guess.

But I agree, these so called Vaillant gurus don’t know it themselves.

Op wo 25 jan. 2023 om 18:09 schreef Matthieu @.***>

There is no sensor "at the top". It is goes down at mid position. The value displayed by T7 doesn't reflect the actual measured temperature (verified with a second sensor and confirmed by Vaillant btw).

If T7 was really at the top it would almost always be high except when the tank is actually entirely cold (because of stratification). The fact that the value is continuously evolving shows clearly that it is a computed value that takes various parameters into account.

To be fair T6 isn’t exactly the "bottom tank temperature". That’s the solar circuit return (to the solar captors, after the heat exchanger) temperature, but can be assumed to bottom tank temperature when the pump is off. Same for T1 : it's the solar circuit temperature before the heat exchanger, at the middle of the tank. Likewise it can be assumed to be the mid tank temperature when the pump is off.

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1403950298, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM65Q23NGG5CK4XI3DTDWUFM3DANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[pagaille]

Just take any thermometer and put it at the top of the "doigt the gant" : I'm pretty sure that the t° will be much higher than the one displayed on your display, except if the tank is fully heated.

[Strobistar]

Then they did the wiring completely wrong because what I see on the display is NOT corresponding to T7 in ebusd… and yes T7 is much warmer than what shown.

Op wo 25 jan. 2023 om 18:29 schreef Matthieu @.***>

Just take any thermometer and put it at the top of the "doigt the gant" : I'm pretty sure that the t° will be much higher than the one displayed on your display, except if the tank is fully heated.

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-configuration/issues/156#issuecomment-1403980918, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANENM64KO5C3R77DEDHMSNTWUFPF5ANCNFSM4JW5VE2Q . You are receiving this because you were mentioned.Message ID: @.***>

[pagaille]

T7 corresponds to the the value displayed on the screen here.

[Wassman2020]

Hi.

I tested with diferentes CSV. if we use the original 06.pms.csv rename to 06.vmd.csv ebusd detected a los of entitys. If we use .csv of @pagaille

type (r[1-9];w;u),circuit,name,[comment],[QQ],ZZ,PBSB,[ID],field1,part (m/s),datatypes/templates,divider/values,unit,comment

,VMD01,VMS 8/D,0020071488 243,,,,,,,,,,

r,,,,,,"B509","0D",,,,,, w,,,,,,"B509","0E",,,,,, *wi,#install,,,,,"B509","0E",,,,,,

Generell #####,,,,,,,,,,,,,

r,,T5,T5 Sensor,,,,"0500",,,tempsensor,,,Solar collector Temperature r,,T1,T1 Sensor,,,,"0700",,,tempsensor,,,Temperature in solar back flow (from solar collector) r,,T7,T7 Sensor,,,,"0C00",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) r,,PowerOnCounter,PowerOnCounter,,,,"1900",,,UIN,,, Power On Counter (in hours) r,,T6,T6 Sensor,,,,"A100",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) r;wi,,FlowRate,Volumenstrom,,,,"9E00",,,SIN,10,l/min,chosen flow rate of the collector pump (to calculate solar gain)

Ebusd only detect one entity.

If we use .csv of @pagaille with name of sensor changed.

type (r[1-9];w;u),circuit,name,[comment],[QQ],ZZ,PBSB,[ID],field1,part (m/s),datatypes/templates,divider/values,unit,comment

,VMD01,VMS 8/D,0020071488 243,,,,,,,,,,

r,,,,,,"B509","0D",,,,,, w,,,,,,"B509","0E",,,,,, *wi,#install,,,,,"B509","0E",,,,,,

Generell #####,,,,,,,,,,,,,

r,,Ntc2Sensor,Ntc2Sensor,,,,"0600",,,tempsensor,,,Temperature in solar back flow (to solar collector) r,,Ntc4Sensor,Ntc4Sensor,,,,"0800",,,tempsensor,,,Temperature in buffer back flow (from buffer) r,,Ntc1Sensor,Ntc1Sensor,,,,"0500",,,tempsensor,,,Temperature in solar flow (from solar collector) T5 r,,Ntc3Sensor,Ntc3Sensor,,,,"0700",,,tempsensor,,,Temperature in buffer flow (to buffer) T1 r,,Ntc7Sensor,Ntc7Sensor,,,,"0C00",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) T7 r,,PowerOnCounter,PowerOnCounter,,,,"1900",,,UIN,,, Power On Counter (in hours) r,,Ntc6Sensor,Ntc6Sensor,,,,"A100",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) T6 r;wi,,FlowRate,Volumenstrom,,,,"9E00",,,SIN,10,l/min,chosen flow rate of the collector pump (to calculate solar gain) !include,errors.inc,,,,,,,,,,,,

Ebus d detected sensor and valor less Ntc2 and Ntc4

If we changed the name os sensor, eBusd detected sensor but without valor.

type (r[1-9];w;u),circuit,name,[comment],[QQ],ZZ,PBSB,[ID],field1,part (m/s),datatypes/templates,divider/values,unit,comment

,VMD01,VMS 8/D,0020071488 243,,,,,,,,,,

r,,,,,,"B509","0D",,,,,, w,,,,,,"B509","0E",,,,,, *wi,#install,,,,,"B509","0E",,,,,,

Generell #####,,,,,,,,,,,,,

r,,Sensor2,T2 Sensor,,,,"0600",,,tempsensor,,,Temperature in solar back flow (to solar collector) r,,Sensor4,T4 Sensor,,,,"0800",,,tempsensor,,,Temperature in buffer back flow (from buffer) r,,Sensor1,T1 Sensor,,,,"0500",,,tempsensor,,,Temperature in solar flow (from solar collector) T5 r,,Sensor3,T3 Sensor,,,,"0700",,,tempsensor,,,Temperature in buffer flow (to buffer) T1 r,,Sensor7,T7 Sensor,,,,"0C00",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) T7 r,,Tiempo_encendido,Tiempo encendido,,,,"1900",,,UIN,,, Power On Counter (in hours) r,,Sensor6,T6 Sensor,,,,"A100",,,tempsensor,,,Average temperature in tank (computed from T6 and mid tank sensor values)) T6 r;wi,,FlowRate,Volumenstrom,,,,"9E00",,,SIN,10,l/min,chosen flow rate of the collector pump (to calculate solar gain) !include,errors.inc,,,,,,,,,,,,

It's very strange, only changed the name, sensor name and valor are showed. I thinked that the name in .csv is not important but if we use T5 instead of Ntc1Sensor sensor and value not displayed