I can't find any info about support for Vaillant VFW heat pumps and Vaiilant Recovair ventilation. I'd like to create one. Can anyone direct me how to do it? I was trying to read documentation but it's not perfectly clear how to create/decode values.
Strangely "find" shows just a few fields with data. All "700" parameters have "no data stored" - is there a problem with MultiMatic 700 controller parsing? I thought that should be standard even when there is no support for VWF.
I get a lot of following log messages at the moment:
-[update notice] received unknown MS cmd
-[update error] unable to parse scan-read scan.76 id
-[main error] scan config 76: ERR: invalid position
info
version: ebusd 3.4.v3.4-20-gedfe09a
signal: acquired
symbol rate: 50
max symbol rate: 121
min arbitration micros: 92
max arbitration micros: 483
min symbol latency: 4
max symbol latency: 6
reconnects: 0
masters: 5
messages: 482
conditional: 0
poll: 0
update: 10
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0307;HW=0403", loaded "vaillant/08.hmu.csv"
address 10: master #2
address 13: master #12
address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0419;HW=4603", loaded "vaillant/15.700.csv"
address 18: slave #12, scanned "MF=Vaillant;ID=V32;SW=0117;HW=9802"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 71: master #9
address 76: slave #9, scanned "MF=Vaillant;ID=VWZ00;SW=0307;HW=0403"
scan result
08;Vaillant;HMU00;0307;0403;21;17;27;0010016691;0001;005076;N5
15;Vaillant;70000;0419;4603
18;Vaillant;V32;0117;9802
76;Vaillant;VWZ00;0307;0403
john30
commented
3 years ago
Hi
I can't find any info about support for Vaillant VFW heat pumps and Vaiilant Recovair ventilation. I'd like to create one. Can anyone direct me how to do it? I was trying to read documentation but it's not perfectly clear how to create/decode values.
Strangely "find" shows just a few fields with data. All "700" parameters have "no data stored" - is there a problem with MultiMatic 700 controller parsing? I thought that should be standard even when there is no support for VWF.
I get a lot of following log messages at the moment: -[update notice] received unknown MS cmd -[update error] unable to parse scan-read scan.76 id -[main error] scan config 76: ERR: invalid position
info version: ebusd 3.4.v3.4-20-gedfe09a signal: acquired symbol rate: 50 max symbol rate: 121 min arbitration micros: 92 max arbitration micros: 483 min symbol latency: 4 max symbol latency: 6 reconnects: 0 masters: 5 messages: 482 conditional: 0 poll: 0 update: 10 address 03: master #11 address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0307;HW=0403", loaded "vaillant/08.hmu.csv" address 10: master #2 address 13: master #12 address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0419;HW=4603", loaded "vaillant/15.700.csv" address 18: slave #12, scanned "MF=Vaillant;ID=V32;SW=0117;HW=9802" address 31: master #8, ebusd address 36: slave #8, ebusd address 71: master #9 address 76: slave #9, scanned "MF=Vaillant;ID=VWZ00;SW=0307;HW=0403"
scan result 08;Vaillant;HMU00;0307;0403;21;17;27;0010016691;0001;005076;N5 15;Vaillant;70000;0419;4603 18;Vaillant;V32;0117;9802 76;Vaillant;VWZ00;0307;0403