search

john30 / ebusd-configuration

ebusd configuration files
GNU General Public License v3.0
182 stars 283 forks source link

ELCO Aerotop Split #212

Open ck-coke opened 3 years ago

ck-coke commented 3 years ago

Hi,

I'm thinking about buying an ebus adapter for my Elco Aerotop Split Heat Pump. How high is the chance that I can scan and find out all codes to integrate the heatpump later on in Iobroker? Does it make sense to buy an adapter or not?

john30 commented 3 years ago

to be honest: the chances are almost zero to get matching configuration files for this device immediately. However, with an adapter you can sniff into the eBUS traffic and if all goes well, the device might just use the standard messages from the eBUS PDFs. In this case, it is rather easy to add the definitions. Otherwise you'd have to find the meaning of the grabbed messages one by one.

wrongisthenewright commented 2 years ago

Hi CK-Coke, I'm working on a configutation settings for a similar machine. I've got an Ariston Nimbus 70/m, from what I've seen online this is a similar machine if not the same with another brand, I'll let you know how it works...

wrongisthenewright commented 2 years ago

I've set up a separate repo for Bridgenet specific configuration, it's still a pretty raw setup but in my case ti works to gather many metrics from the system, hoping to not break some rule I link it here:

https://github.com/wrongisthenewright/ebusd-configuration-ariston-bridgenet