Silverstar
commented
10 months ago It's the controller (15) which is not supported, not the burner (08). No one can magically create a config file, especially if they don't have the device in question. You may try to build one yourself from other configs.
Please add support for the Vaillant ecocompact.
https://www.vaillant.de/heizung/produkte/gas-brennwertsystem-ecocompact-969.html?gad=1&gclid=Cj0KCQjw84anBhCtARIsAISI-xe-RM-JV9GOHa5Q26bs9rKiMOMgZqHTKTiJR51G0JxQu5qCToBpJmcaAhXlEALw_wcB
unable to load scan config 15: no file from vaillant with prefix 15 matches ID "scc00", SW0500, HW3903
ebusctl info version: ebusd 23.2.23.2 update check: OK, device firmware 1[8419] available device: /dev/ttyAMA0, enhanced high speed, firmware 1.1[7f16].2[73c8] signal: acquired symbol rate: 23 max symbol rate: 161 min arbitration micros: 15 max arbitration micros: 19 min symbol latency: 4 max symbol latency: 4 scan: finished reconnects: 0 masters: 3 messages: 204 conditional: 2 poll: 0 update: 10 address 03: master #11 address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0205;HW=9602", loaded "vaillant/bai.0010015600.inc" ([PROD='0010015601']), "vaillant/08.bai.csv" address 10: master #2 address 15: slave #2, scanned "MF=Vaillant;ID=SCC00;SW=0500;HW=3903" address 31: master #8, ebusd address 36: slave #8, ebusd