search

john30 / ebusd-esp

Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
150 stars 21 forks source link

esp d1 mini stop working when plugged in to ebus adapter v3 #69

Open frompani opened 2 years ago

frompani commented 2 years ago

hi , I flashed ebus-v3_d1mini.bin on esp8266 -12f , and setup wifi with no issue. But when I plug the esp into the adapter , esp does not connect to wifi .

Power cord and supply are good . If I plug power into the adapter's usb nothing happen . If I plug power into esp's usb , adapter's blue led start blinking ,green and orange are on, esp apparently not working .

any suggestion? thnak's fab

john30 commented 1 year ago

mostly power source related, so try another one first. and check if latest firmware is better as the WIFI signal strength was increased

frompani commented 1 year ago

already changed 3 . changed also esp ( twice) ... no luck . I'm trying to use a spare RPI . Eventually , could you sell a complete working system ( ebus+esp module )? thanks f

Il giorno sab 17 set 2022 alle ore 09:03 John @.***> ha scritto:

mostly power source related, so try another one first. and check if latest firmware is better as the WIFI signal strength was increased

— Reply to this email directly, view it on GitHub https://github.com/john30/ebusd-esp/issues/69#issuecomment-1250016481, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQPCMXHJ2UOELW6VKVW4H5DV6VUNZANCNFSM52AAHX6Q . You are receiving this because you authored the thread.Message ID: @.***>

john30 commented 1 year ago

did you do some fancy port setup on the esp through the command line interface or the web?

it works fine, I'm using a wifi variant myself, so the problem is elsewhere.

If I plug power into the adapter's usb nothing happen .

then you probably didn't do the jumpers correctly.