search

john30 / ebusd-esp32

Firmware for ESP32-C3 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
https://adapter.ebusd.eu/v5
23 stars 1 forks source link

No connection to recovair260 #9

Closed cvastag closed 8 months ago

cvastag commented 1 year ago

Try to connect Revovair 260 Adapter ist Version 5

Only Blue and Green LED is on, red LED no activity. Also try to change Cable and firmware of Adapter

easi: ebusd connected: yes (inactive) eBUS signal: acquired

Ebusd:

ebusctl info
version: ebusd 23.2.23.2
update check: OK
device: 10.0.20.245:9999, enhanced, firmware 1.1[3501].1[3501]
access: *
signal: acquired
symbol rate: 23
max symbol rate: 32
scan: finished
reconnects: 2
masters: 1
messages: 11
conditional: 0
poll: 0
update: 4
address 04: slave #25, ebusd
address ff: master #25, ebusd

john30 commented 1 year ago

looks as if the recovair does not send anything to the bus on its own, otherwise the master/slave addresses would appear

try using full scan option of ebusd

cvastag commented 1 year ago

With full scan I can find the Recovair

root@ john30-ebusd1: /# ebusctl scan result 1 scan (s) still running 08; Vaillant; recoV; 0227; 0203

But there is no csv in the config folder.

Can you pls upload 08.recov.csv?

https://github.com/john30/ebusd-configuration/pull/343/commits/cfc3aae948f3bc85873b00ecba2bebc6b64ebf07

john30 commented 8 months ago

wrong repo, so closing