Not responding after starting ebusd scanconfig

john30 / ebusd

daemon for communication with eBUS heating systems

GNU General Public License v3.0

560 stars 130 forks source link

Not responding after starting ebusd scanconfig #284

Closed diamond95 closed 5 years ago

diamond95 commented 5 years ago

Hi John,

I have WRSol2.1 and after installation on debian, I'm trying to run: cd ebusd sudo ebusd -f -d /dev/ttyUSB0 --scanconfig ... [main notice] ebusd 3.1 ... started with auto scan

After that message, nothing shows up, even after 30 minutes. Am I missing something? I also tried to check ebusd status, and get this: https://imgur.com/a/FVP7zAZ

Best regards

john30 commented 5 years ago

the status is ok. is your adapter connected to /dev/ttyUSB0?

diamond95 commented 5 years ago

Yes it is.. Like this: https://imgur.com/a/ycRiOip

john30 commented 5 years ago

this adapter is unknown to me and probably does not forward the raw data to the serial device

diamond95 commented 5 years ago

Which one do you suggest? On photo you can see I have some sort of converter called Ebus, from device to pc, but didnt work out.. :/

john30 commented 5 years ago

see the wiki https://github.com/john30/ebusd/wiki/6.-Hardware