klaus77777777
commented
1 year ago Hello,
I was able to solve my issue after reading many other issues, question and hints.
My main issue was that ebusd wasn't able to load a config file for CTLV2 this is the Vaillant sensoCOMFORT VRC 720.
ebusctl info #before ... address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104"
after doing the things I will describe later ebusd was able to load the config file for
ebusctl info #after ... address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104", loaded "vaillant/15.ctlv2.csv"
To do's: I downloaded the ebusd config files from https://github.com/john30/ebusd-configuration and saved them localy on my raspi machine, I'm using the eBus Koppler USB mounted to my raspi.
Here my ebusd configuration EBUSD_OPTS="--scanconfig=full --port=8888 --accesslevel=* --latency=0 --configpath=/ebus_config_data/"
And than I created the file 15.ctlv2.csv in the folder /ebus_config_data/vaillant, I took the content of the downloaded file 15.700.csv and put it to the created file 15.ctlv2.csv.
After this I restarted the ebusd with the result, that the file was picked up by ebusd.
ebusctl info #after ... address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104", loaded "vaillant/15.ctlv2.csv"
ebusctl info ... poll: 1 update: 10 address 00: master #1 address 03: master #11 address 05: slave #1, scanned "MF=Vaillant;ID=VR921;SW=2801;HW=5703" address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0607;HW=5103", loaded "vaillant/08.hmu.csv" address 0a: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302", loaded "vaillant/0a.pmw.hwc.csv" address 10: master #2 address 12: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302" address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104", loaded "vaillant/15.ctlv2.csv" address 26: slave, scanned "MF=Vaillant;ID=VR_71;SW=0203;HW=5904", loaded "vaillant/26.vr_71.csv" address 31: master #8, ebusd address 36: slave #8, ebusd, scanning address 71: master #9 address 76: slave #9, scanned "MF=Vaillant;ID=VWZIO;SW=0607;HW=5103" address ec: slave, scanned "MF=Vaillant;ID=SOL00;SW=0514;HW=1104", loaded "vaillant/ec.sol.sc.csv" address f7: master #20 address fc: slave #20, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302"
And now I'm able to use most of the configured values in the original file 15.700.csv or my name 15.ctlv2.csv. I was searching for a way to change the values of
Hc1MaxFlowTempDesired Hc1HeatCurve z1OpMode
and this is now working, have a look
ebusctl w -c ctlv2 Hc1MaxFlowTempDesired 44
done ebusctl r Hc1MaxFlowTempDesired 44 ebusctl r -c ctlv2 Hc1MaxFlowTempDesired 44
ebusctl w -c ctlv2 Hc1HeatCurve 2.1
done ebusctl r Hc1HeatCurve 2.1 ebusctl r -c ctlv2 Hc1HeatCurve 2.1
ebusctl w -c ctlv2 z1OpMode auto
ebusctl r -c ctlv2 z1OpMode auto ebusctl r z1OpMode auto
ebusctl w -c ctlv2 z1OpMode off
done ebusctl r -c ctlv2 z1OpMode off ebusctl r z1OpMode off
regards
Klaus
Description
Hello,
I also have issues writing to the ebus
here my config
EBUSD_OPTS="--scanconfig=full --port=8888 --accesslevel=* --latency=0 --configpath=http://ebusd.eu/config/"
update: 10 address 00: master #1 address 03: master #11 address 05: slave #1, scanned "MF=Vaillant;ID=VR921;SW=2801;HW=5703" address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0607;HW=5103", loaded "vaillant/08.hmu.csv" address 0a: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302", loaded "vaillant/0a.pmw.hwc.csv" address 10: master #2 address 12: slave, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302" address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104" address 26: slave, scanned "MF=Vaillant;ID=VR_71;SW=0203;HW=5904", loaded "vaillant/26.vr_71.csv" address 31: master #8, ebusd address 36: slave #8, ebusd, scanning address 71: master #9 address 76: slave #9, scanned "MF=Vaillant;ID=VWZIO;SW=0607;HW=5103" address ec: slave, scanned "MF=Vaillant;ID=SOL00;SW=0514;HW=1104", loaded "vaillant/ec.sol.sc.csv" address f7: master #20 address fc: slave #20, scanned "MF=Vaillant;ID=PMW01;SW=0206;HW=8302"
Here my command pi@raspberrypi:~/ $ ebusctl w -s 10 -c vr_71 Mc1FlowTempDesired 'on;45.0;on;25' done
But it isn't taken
2023-03-30 15:53:20.043 [update notice] received write vr_71 Mc1FlowTempDesired QQ=10: on;44.0;on;0 2023-03-30 15:53:23.481 [update notice] sent write vr_71 Mc1FlowTempDesired QQ=10: on;45.0;on;0 2023-03-30 15:53:23.481 [main notice] write vr_71 Mc1FlowTempDesired: done 2023-03-30 15:53:30.049 [update notice] received write vr_71 Mc1FlowTempDesired QQ=10: on;44.0;on;5
Can you please please help me?
My goal is to set the Mc1FlowTempDesired up an down.
many thx
regards
Klaus
Actual behavior
I thought to change with this command pi@raspberrypi:~/ $ ebusctl w -s 10 -c vr_71 Mc1FlowTempDesired 'on;45.0;on;25' done
the desired FlowTemp in my heatingcircle 1 from 44.0 to 45.0
but this wasn't taken by the system
Expected behavior
I thought to change with this command pi@raspberrypi:~/ $ ebusctl w -s 10 -c vr_71 Mc1FlowTempDesired 'on;45.0;on;25' done
the desired FlowTemp in my heatingcircle 1 from 44.0 to 45.0
but this wasn't taken by the system
ebusd version
23.1
ebusd arguments
EBUSD_OPTS="--scanconfig=full --port=8888 --accesslevel=* --latency=0 --configpath=http://ebusd.eu/config/"
Operating system
Debian 11 (Bullseye) / Ubuntu 20-21 / Raspbian 11 / Raspberry Pi OS 11 (including lite)
CPU architecture
x64
Dockerized
None
Hardware interface
Esera USB
Related integration
TCP (cmdline client like ebusctl or netcat)
Logs
2023-03-30 15:53:20.043 [update notice] received write vr_71 Mc1FlowTempDesired QQ=10: on;44.0;on;0 2023-03-30 15:53:23.481 [update notice] sent write vr_71 Mc1FlowTempDesired QQ=10: on;45.0;on;0 2023-03-30 15:53:23.481 [main notice] write vr_71 Mc1FlowTempDesired: done 2023-03-30 15:53:30.049 [update notice] received write vr_71 Mc1FlowTempDesired QQ=10: on;44.0;on;5