Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Having tried the "stock" firmware and now 2 versions into your amazing upgrade of the touch screen and marlin code base, would you be able to type in a value for the z-offset page(s)? I'm only asking because since it was changed from 0.05 step to 0.01 step it does take awhile to get to the correct offset. Mine just happened to be -1.36. It seems sometimes when the firmware is updated, it zeros the value and I've taken pictures of z-offset along with x/y offsets for nozzle. I think this would just add a little to an already great release. Thanks again for your time
Having tried the "stock" firmware and now 2 versions into your amazing upgrade of the touch screen and marlin code base, would you be able to type in a value for the z-offset page(s)? I'm only asking because since it was changed from 0.05 step to 0.01 step it does take awhile to get to the correct offset. Mine just happened to be -1.36. It seems sometimes when the firmware is updated, it zeros the value and I've taken pictures of z-offset along with x/y offsets for nozzle. I think this would just add a little to an already great release. Thanks again for your time