search

jojos38 / anycubic-kobra-dark-ui

A dark and improved UI for the Anycubic Kobra 3d printer
29 stars 13 forks source link

Overlapping "°C" #3

Closed Solilord closed 2 years ago

Solilord commented 2 years ago

Heya. I noticed that the top bar is overlapping the "°C" on the nozzle side.

image

It doesn't bother me that much, but maybe it can be fixed for next release ;)

jojos38 commented 2 years ago

Hey, thanks for reporting the issue I'll try to fix this asap by moving the C a bit to the right

jojos38 commented 2 years ago

1668.zip Would you be able to try to flash that ICL file please and tell me if it worked? I don't have my printer for now You just need to follow the installation steps as usual but just put that .ICL file in the DWIN Folder, you don't need anything else

Solilord commented 2 years ago

i will try it as soon as i can. (probably tomorrow morning) Right now i have a 28h Print running :D

jojos38 commented 2 years ago

Alright haha, I leave home tomorrow hence why I cannot, take your time it's not urgent and good luck for the print

SineVVAVz commented 2 years ago

I can try it in another hour. Just use that zip above correct?

jojos38 commented 2 years ago

I can try it in another hour. Just use that zip above correct?

Thanks! Yep just drop the .icl file that is in the zip in a DWIN_SET folder on your SD card and that's all

SineVVAVz commented 2 years ago

Know what? I just noticed that mine is fine off your original file. Wonder why his is acting different. image

Solilord commented 2 years ago

On main screen it's fine as well. It's in any of the subpages (orange top) I can't find it now and don't want to click around. I don't wanna mess up my huge print.

Edit: but i didnt notice that the shift isnt on all pages.. strange. Maybe you can check all subsites.

jojos38 commented 2 years ago

It might be my CSS code actually? Or maybe the text isn't centered in every textbox or something like this, I will try to see if I can find the issue but I won't have much time so it probably will be next week

SineVVAVz commented 2 years ago

I only have the temp shown on my main page. All sub pages just have the title of the sub on top. Am I missing something here? All subs are the same as pictured just different titles and colors but no temp. image

Solilord commented 2 years ago

Ahh. I remeber where.

Start Auto-Leveling! This is the only one with orange top and temps on top :D Okay, not the biggest Issue but yesterday i thought this bug would be everywhere :D

SineVVAVz commented 2 years ago

Ahh HA! I found what you are talking about. I'll run the test code and see what happens

SineVVAVz commented 2 years ago

Yup...it's still there after I updated it with the new file.

No rush on the fix as it's just aesthetics. Been printing fine so far. image

jojos38 commented 2 years ago

DWIN_SET.zip After further investigation I think this is a firmware bug from the motherboard, the font doesn't seem to be the same size between both?? Can you guys try this one and tell me if it works please We don't have the source code of the firmware yet sadly

SineVVAVz commented 2 years ago

Will do. Waiting for a print to finish shortly

jojos38 commented 2 years ago

Also, the above file should not completely fix the issue as the text will still differ from the original, but it should at least not overlap anymore on the °C

SineVVAVz commented 2 years ago

It's better. Seems like it's needs another "push" over but it's close!

image

image

jojos38 commented 2 years ago

This one should be good, I moved it one pixel more to the left. If it's still too much to the right I will move it one pixel further and call it a day as I believe the text is one or two pixel away from the °C for others

Thank you very much for your time and for testing by the way

SineVVAVz commented 2 years ago

Drop all 3 files in or just the .icl?

jojos38 commented 2 years ago

Desktop.zip My bad, didn't mean the put the .ICL sorry, here is the right one

SineVVAVz commented 2 years ago

Your welcome BTW...and Thank you for making a sweet GUI! Wish this dang thing had more adjustments for a filament change.

Got ya. Going to try it after another test print finishes in 5 mins

jojos38 commented 2 years ago

Your welcome BTW...and Thank you for making a sweet GUI! Wish this dang thing had more adjustments for a filament change.

Got ya. Going to try it after another test print finishes in 5 mins

If they release the firmware to the public I'll start touching the firmware and more important changes hopefully I already contacted them I'm waiting for their answer

SineVVAVz commented 2 years ago

Ok well I think the one before this was better. This has a big gap now.

image

image

jojos38 commented 2 years ago

I really don't get it at this point, the only difference between the first one and the second one was the X position which I moved by one pixel. If you look closely you'll see that the character spacing between the first and the second is not the same. I don't really understand what's happening here

jojos38 commented 2 years ago

The font you have here on the last photo is the right one btw, this would've worked if the text was placed like any other page. But if I place it like "any other page" then the font seems to change and it's off

SineVVAVz commented 2 years ago

No worries. I think it's good to go for now if you can just update you assets to the one before this. At least there is a small gap. It's just my OCD...lol. People should be happy it works given the fact that they have't released the code and I'm sure you'll revamp it when and if they do release it. Fingers Crossed

jojos38 commented 2 years ago

No worries. I think it's good to go for now if you can just update you assets to the one before this. At least there is a small gap. It's just my OCD...lol. People should be happy it works given the fact that they have't released the code and I'm sure you'll revamp it when and if they do release it. Fingers Crossed

They released the code for the Vyper so I would expect them to release the code for the Kobra but maybe they have some delay like 1 year after the printer release or some stuff like this. Let's see I guess

Either way, I will release the file before the last one as you said, thank you very much for your help as well as @Solilord

jojos38 commented 2 years ago

I'm just adding a comment to tell you about the answer from Anycubic, as expected we will get the source code for the firmware in 2 to 3 months. Lets be patient haha