search

jomjol / AI-on-the-edge-device

Easy to use device for connecting "old" measuring units (water, power, gas, ...) to the digital world
https://jomjol.github.io/AI-on-the-edge-device-docs/
5.67k stars 612 forks source link

Camera not working #151

Closed beimoe closed 3 years ago

beimoe commented 3 years ago

Hi,

in the IDF Monitor all looks fine, but i get the messages below (which repeat endless). What is the problem here?

[Debug] Start ReadParameter Logfile = false LogfileRetentionInDays = 3

[System] Start ReadParameter TimeZone = CET-1CEST,M3.5.0,M10.5.0/3 TimeZone set to CET-1CEST,M3.5.0,M10.5.0/3 ;TimeServer = fritz.box ;hostname = watermeter SetupMode = true

bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff bh 0x00ffdaff [Ende]E (28369) camera: Failed to get the frame on time! E (28369) server_part_camera: Camera Capture Failed bh 0x00ffdaff

jomjol commented 3 years ago

Another user has reported a similar behaviour: https://github.com/jomjol/AI-on-the-edge-device/issues/139 There it turned out, that the camera was broken. Maybe only the connection is lost and you can check the cable firstly. Best regards, jomjol

jomjol commented 3 years ago

Currently not active, there I will close it. Please reopen in case of further support needed.