search

jomjol / AI-on-the-edge-device

Easy to use device for connecting "old" measuring units (water, power, gas, ...) to the digital world
https://jomjol.github.io/AI-on-the-edge-device-docs/
5.27k stars 580 forks source link

Wrong Recognized Analog ROIs #2973

Open winacid opened 4 months ago

winacid commented 4 months ago

The Problem

the recognized analog rios are completly off. what is wrong?

Version

15.7.0

Logfile

[0d00h01m19s] 2024-03-07T08:26:08 <ERR> [POSTPROC] main: Raw: 00065.1130, Value: , Status: Neg. Rate - Read: - Raw: 00065.1130 - Pre: 65.8830

Expected Behavior

No response

Screenshots

image

Additional Context

No response

jgmGit commented 3 months ago

I have a similar issue with 15.7 version.

The analog values are completly off.

image

SybexX commented 3 months ago

Your ROIs are relatively poorly aligned and quite blurry, try to correct this first. In approximately like this picture: ROIs

SybexX commented 3 months ago

If this didn't help, install this version(I added some debug output to better localize the error.), let it run for a while and put the log here (please as a txt file). Save your config beforehand and then select and update the zip via OTA. And some information about your settings would also be helpful^^ AI-on-the-edge-deviceupdatecamsettings(44d476d)_minimal.zip

jgmGit commented 2 months ago

image

@SybexX sorry for the long delay. What do you they about the alignment now ? Still the values are very much off.

Attaching my config also. config.txt

SybexX commented 2 months ago

Set the ImageQuality to 8 (the higher the value, the worse the image quality). Try using the Brightness, Contrast and Saturation parameters to see if you can increase the image quality even further.

Cyrelion commented 1 month ago

I've the same problem that the analog digits are totally off :-(

Screenshot 2024-05-28 at 07 50 14