Rotation und Positionen aus der Config werden nicht korrekt verwendet

msmthng commented 6 months ago

The Problem

Nach dem Austausch des Zählers habe ich das Reference Image, sowie die gesamten Marker und Positionen der digits aktuallisiert, die Dater werden aber von einer anderen Stelle des Bildes geholt.

Version

v15.7.0

Logfile

[0d00h00m48s] 2024-03-21T09:35:28 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2024-03-21T08:37:19 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-03-21T08:37:19 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-03-21T08:37:19 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-03-21T08:37:19 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-03-21T08:37:19 <INF> [MAIN] Total heap: 4380067 byte
[0d00h00m04s] 2024-03-21T08:37:23 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-03-21T08:37:23 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-03-21T08:37:23 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-03-21T08:37:23 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-03-21T08:37:23 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-03-21T09:37:23 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-03-21T09:37:23 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2024-03-21T09:37:23 <INF> [SNTP] Time is already set: 2024-03-21 09:37:23
[0d00h00m04s] 2024-03-21T09:37:23 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m04s] 2024-03-21T09:37:23 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-03-21T09:37:23 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-03-21T09:37:23 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-03-21T09:37:23 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2024-03-21T09:37:23 <INF> [WLANINI] SSID: voltan
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WLANINI] Hostname: watermetermain
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WIFI] Set hostname to: watermetermain
[0d00h00m05s] 2024-03-21T09:37:24 <INF> [WIFI] Init successful
[0d00h00m08s] 2024-03-21T09:37:26 <INF> [WIFI] Connected to: voltan, RSSI: -59
[0d00h00m09s] 2024-03-21T09:37:27 <INF> [WIFI] Assigned IP: 192.168.1.90
[0d00h00m09s] 2024-03-21T09:35:44 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2024-03-21 09:35:44
[0d00h00m11s] 2024-03-21T09:35:46 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2024-03-21T09:35:46 <INF> [MAIN] SD card info: Name: SP32G, Capacity: 30436MB, Free: 29870MB
[0d00h00m13s] 2024-03-21T09:35:48 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2024-03-21T09:35:50 <INF> [LOGFILE] Set log level to WARNING
[0d00h01m02s] 2024-03-21T09:36:36 <ERR> [POSTPROC] main: Raw: 33006.7789, Value: , Status: Rate too high - Read: 33006.7789 - Pre: 0.0000 - Rate: 33006.7789
[0d00h06m02s] 2024-03-21T09:41:36 <ERR> [POSTPROC] main: Raw: 43006.6780, Value: , Status: Rate too high - Read: 43006.6780 - Pre: 0.0000 - Rate: 43006.6780
[0d00h11m02s] 2024-03-21T09:46:36 <ERR> [POSTPROC] main: Raw: 53006.7780, Value: , Status: Rate too high - Read: 53006.7780 - Pre: 0.0000 - Rate: 53006.7780