Open mchicke opened 2 months ago
The alignment marks are saved as images, while the ROIs are saved as coordinates. This behavior can only be understood if you change the reference image and leave the alignment markings old.
Process sequence correct: Camera settings changed >>> reference image >>> alignment markings >>> digital + analog ROIs or reference image >>> alignment markings >>> digital + analog ROIs or alignment markings >>> digital + analog ROIs or digital + analog ROIs
Process sequence wrong: Camera settings changed >>> reference image >>> digital + analog ROIs or Camera settings changed >>> digital + analog ROIs or reference image >>> digital + analog ROIs
digital + analog ROIs
In all of my instances, I did not change the reference image or camera settings. I was only fine tuning the digital ROIs. I then rebooted and the preview on the home page had the alignment markings off. If I went in to align markers and did NOT make any changes, but saved them, it returned to normal after another reboot.
Does the error appear again and again (several evaluations/rounds) or just once? A few pictures would also be beneficial to understand this problem.
Apologies for the long delay. It was working and sending data to HA for 16 days straight. It then just stopped sending data, the webpage would not load, and after several reboots, I let it sit for a while. I then went to check the webpage last night, and it started loading again (faster than ever). The issue came up again, and I went through the same process. I went to Alignment>Alignment Markers, then I just clicked update marker, save new marker. I then repeated for my second marker. Rebooted and it worked again, successfully reporting the correct value. I did not change any other settings.
I do have the algorithm set to the default as pictured above.
Edit: I did need to change the previous value, as it was 7 days old.
The Problem
When adjusting digit ROIs and rebooting, the alignment markers become misaligned. If I then update markers (without actually moving) and save the config, then reboot, it aligns properly in the next workflow after rebooting.
Version
Logfile
Expected Behavior
No response
Screenshots
No response
Additional Context
No response