search

jomjol / AI-on-the-edge-device

Easy to use device for connecting "old" measuring units (water, power, gas, ...) to the digital world
https://jomjol.github.io/AI-on-the-edge-device-docs/
5.75k stars 618 forks source link

'TakeImage' in the field 'ImageSize' is invalid. #3050

Closed Sectorchan closed 5 months ago

Sectorchan commented 5 months ago

The Problem

I used a fresh ESP32-CAM and used the webinstaller. Once I get into the mainpage after initial setup, I go to Configuration and get the following message: image When I got to expert parameter I can not select the respective option: image_size

Version

Firmware version: Release: v15.7.0 (Commit: 0d0b018+) Firmware build time: 17.02.2024 00:15 Web interface version: Release: v15.7.0 (Commit: 0d0b018+)

Logfile

[0d00h00m00s] 2024-04-26T09:49:28 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-04-26T09:49:28 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-04-26T09:49:28 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-04-26T09:49:28 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-04-26T09:49:28 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-04-26T09:49:32 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-04-26T09:49:32 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-04-26T09:49:32 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-04-26T09:49:32 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-04-26T09:49:32 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-04-26T11:49:32 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-04-26T11:49:32 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-04-26T11:49:32 <INF> [SNTP] Time is already set: 2024-04-26 11:49:32
[0d00h00m04s] 2024-04-26T11:49:32 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m04s] 2024-04-26T11:49:33 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m04s] 2024-04-26T11:49:33 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] SSID: YYYYYY
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] Hostname: Zaehler-Wasser
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] IP-Address: 192.168.1.57
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] Gateway: 192.168.1.1
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] Netmask: 255.255.255.0
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] DNS: 8.8.8.8
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WIFI] Manual interface config -> IP: 192.168.1.57, Gateway: 192.168.1.1, Netmask: 255.255.255.0
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WIFI] Manual interface config -> DNS: 8.8.8.8
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WIFI] Set hostname to: Zaehler-Wasser
[0d00h00m05s] 2024-04-26T11:49:33 <INF> [WIFI] Init successful
[0d00h00m07s] 2024-04-26T11:49:36 <INF> [WIFI] Connected to: Zuhause, RSSI: -60
[0d00h00m07s] 2024-04-26T11:49:36 <INF> [WIFI] Assigned IP: 192.168.1.57
[0d00h00m08s] 2024-04-26T11:49:36 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2024-04-26 11:49:36
[0d00h00m08s] 2024-04-26T11:49:36 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2024-04-26 11:49:36
[0d00h00m09s] 2024-04-26T11:49:37 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m09s] 2024-04-26T11:49:37 <INF> [MAIN] SD card info: Name: APPSD, Capacity: 1920MB, Free: 1906MB
[0d00h00m11s] 2024-04-26T11:49:39 <INF> [MAIN] Initialization completed successfully
[0d00h00m13s] 2024-04-26T11:49:42 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m51s] 2024-04-26T11:50:19 <ERR> [POSTPROC] main: Raw: 011.2267, Value: , Status: Neg. Rate - Read: - Raw: 011.2267 - Pre: 42.0134
[0d00h05m51s] 2024-04-26T11:55:19 <ERR> [POSTPROC] main: Raw: 010.6567, Value: , Status: Neg. Rate - Read: - Raw: 010.6567 - Pre: 42.0134

Expected Behavior

Select the option to define the image quality

Screenshots

image image_size

Additional Context

No response

SybexX commented 5 months ago

There is something wrong with your config.ini (wrong or missing entries), please use the one that matches the firmware version. config.zip

Sectorchan commented 5 months ago

Thats strange, because I've downloaded the zip from Github incl. the SDCARD folder. After the replace it works now thanks