Closed JonasKruse1 closed 1 month ago
have you tried the following address?
192.168.178.113/info 192.168.178.113/sysinfo 192.168.178.113/starttime 192.168.178.113/statusflow 192.168.178.113/cpu_temperature 192.168.178.113/rssi 192.168.178.113/uptime 192.168.178.113/value 192.168.178.113/json 192.168.178.113/heap 192.168.178.113/stream
what value does your rssi have, you can normally read it in the router (e.g. Fritzbox)?
Hi, I attached the screenshot from my fritzbox its -65dBm
and I also tried all the links above none worked
have you tried with another pc or did you briefly disconnect the ESP from the power? Some people have reported that their antivirus software blocked the site, others that they had problems with VPN.
The same with my module.
After a ping the webinterface of the device can be reached for about 10 minutes. Configuration can be done. After that time is can not be reached anymore but the module works fine. I get values via MQTT.
have you tried with another pc or did you briefly disconnect the ESP from the power? Some people have reported that their antivirus software blocked the site, others that they had problems with VPN.
Yes I have tried it all but I can't access the website, not with chrome not with firefox not with edge and tried restarting multiple times
Then I would say there is something wrong with your SD card. Either something has destroyed some files or the SD card is broken(shortly from total failure). Or what could also be that the ESP32 runs hot and thereby reduces the performance of the WiFi and the CPU. The heat from the processor and the Camera is also transferred to the SD card, which could also cause it to fail.
The Problem
Hi, I configured the ESP Cam a couple of days ago and everthing worked out fine but today the web interface is not reachable but if I ping it via CMD it works just fine
Version
latest
Logfile
Expected Behavior
No response
Screenshots
Additional Context
No response