szepzoli
commented
3 months ago Guys,
Probably it's linked to the latest version (1.5.7). Once I installed the previous version, I could take the reference image.
Closed szepzoli closed 3 months ago
szepzoli
commented
3 months ago Guys,
Probably it's linked to the latest version (1.5.7). Once I installed the previous version, I could take the reference image.
SybexX
commented
3 months ago There will be something wrong with your config.ini A lot of camera features were added in 15.7.0 and unfortunately this is causing an issue for several people. Try using the config.ini from the 15.7.0 version or you can try with the current rolling https://github.com/jomjol/AI-on-the-edge-device/actions/runs/9439572638
caco3
commented
3 months ago I tried to use different laptops, various browser, the error is the same. It might be a network setting on my end, but I have no clue what the problem is.
Try to reinstall it. I am very sure something is broken in your web UI. The log also says this:
[0d00h00m05s] 2024-06-12T22:41:57 <WRN> [MAIN] Web UI version (3fbff0a) does not match firmware version (0d0b018+)
[0d00h00m05s] 2024-06-12T22:41:58 <WRN> [MAIN] Recommendation: Repeat installation using AI-on-the-edge-device__update__*.zip@SybexX This most likely has nothing to do with the version!
SybexX
commented
3 months ago @caco3 I overlooked that^^ Then he probably only updated the firmware.bin via OTA, i always do that because it's quicker^^
szepzoli
commented
3 months ago Yes, usually I upgrade using OTA. Thank you for your suggestion, I'm giving to give a try.
The Problem
I'm not able to create a new reference image.
Using the developer tool in browser, I think something happens, when the newly created image is loaded.
The following error message appears in the console: /img_tmp/raw.jpg?session=310897:1 GET http://MY IP ADDRESS
/img_tmp/raw.jpg?session=310897 net::ERR_CONNECTION_RESET
I tried to use different laptops, various browser, the error is the same. It might be a network setting on my end, but I have no clue what the problem is.
Version
Release: v15.7.0 (Commit: 0d0b018+)
Logfile
Expected Behavior
I'd like to create a new reference image after moving my camera.
Screenshots
Additional Context
No response