search

jon-harper / E34M1

EVA 3 modified for the Mercury One.1 3D printer
https://jon-harper.github.io/E34M1/
Other
48 stars 5 forks source link

Sherpa Mini fit test #11

Closed jon-harper closed 10 months ago

jon-harper commented 11 months ago

Sherpa Mini has a mount available, but fit test is pending. See the docs.

sharpner commented 11 months ago

sherpa mini

I use that mount (https://github.com/jon-harper/E34M1/blob/testing/STL/drives/drive_sherpa_mini.stl), the only thing that did not quite work was to get that screw in there - but it works okayish without :-)

jon-harper commented 11 months ago

sherpa mini

I use that mount (https://github.com/jon-harper/E34M1/blob/testing/STL/drives/drive_sherpa_mini.stl), the only thing that did not quite work was to get that screw in there - but it works okayish without :-)

Was the screw hole off or is there not clearance with the ADXL?

sharpner commented 11 months ago

There is no clearance (without the board of course) - I can remove my board and make a photo later to better show the problem

jon-harper commented 10 months ago

There is no clearance (without the board of course) - I can remove my board and make a photo later to better show the problem

Gotcha, I've got it installed now and see the issue. Did you try with a button head screw? I'm using the PIS front and it just fit.

sharpner commented 10 months ago

IMG_9816 Similar, but I just rasped it of a bit and now I got the screw in there 🤷‍♂️

jon-harper commented 10 months ago

Do you happen to have a button head screw to test it with? It fits with a button head on mine but I'm using the PIS front.

sharpner commented 10 months ago

ah sorry, I assumed you meant SHCS because I was using the button head screw initially. As you can see I used it for the other two screws as well. Yes I am using one now, but after I scraped off a bit.

So it's no longer an issue for me if you want to close the ticket xD

jon-harper commented 10 months ago

ah sorry, I assumed you meant SHCS because I was using the button head screw initially. As you can see I used it for the other two screws as well. Yes I am using one now, but after I scraped off a bit.

So it's no longer an issue for me if you want to close the ticket xD

I made a note about the clearance issue and recommended a button head screw there. I'll push the updated docs soon.

Thanks for your help!