CRTouch UHF Mount

[121Jigawatt]

The CRTouch mount for both the UHF and the non UHF look to be the same model unless i'm missing something. Was that a mistake or does it use the same mount?

[jon-harper]

Ack, this is definitely a mistake. There was an issue with the CR Touch model that needed fixing, but this looks like a simple 'oops'.

I will try to get a fixed UHF mount to you today.

[121Jigawatt]

Thanks so much! Also I have made an edit that allows for this filament cutter to be used with the rapido on your E34M1 tool head. https://www.printables.com/model/647352-filament-cutter-for-eva3-orbiter-rapido/files I'm new to using github so what would be the best way to get the stls to you if you want them? Our would you rather add a link to the printables page when I upload it?

[jon-harper]

Thanks so much! Also I have made an edit that allows for this filament cutter to be used with the rapido on your E34M1 tool head. https://www.printables.com/model/647352-filament-cutter-for-eva3-orbiter-rapido/files I'm new to using github so what would be the best way to get the stls to you if you want them? Our would you rather add a link to the printables page when I upload it?

That is a really neat design! Unfortunately, the modified Front makes it incompatible with E34M1. :-/

What about a thin spacer between hotend and extruder mount? Is that too high up to cut?

[121Jigawatt]

It could definitely be done but at the cost of more wasted filament purge :/ The link that I sent was what I based it off of I edited your design to make it fit. I did have to remove the top font right extruder mounting hole to make it fit unfortunately. Cuts it right at the top of the heatsink. I getcha though, kinda takes away the whole modular design of the whole system. Thanks for looking at the abl mount though!

[jon-harper]

It could definitely be done but at the cost of more wasted filament purge :/ The link that I sent was what I based it off of I edited your design to make it fit. I did have to remove the top font right extruder mounting hole to make it fit unfortunately. Cuts it right at the top of the heatsink. I getcha though, kinda takes away the whole modular design of the whole system. Thanks for looking at the abl mount though!

Oh my, I did not catch that. Color me more interested. If you have Discord, consider dropping by the ZeroG EVA 3 channel and spreading the word. I know several users who might be interested. Meanwhile, I'll share your printables link.

EDIT: I see, you modified the above Printables link. No wonder I was confused, lol.

[121Jigawatt]

Will do! I thought that might have been the case lol. Working on a way to actuate the cutting element with something similar to the X axis stop so I won't post anything until I get that worked out hopefully early next week

[jon-harper]

There's a new abl_crtouch_uhf.stl file. Let me know if you run into any other issues.

And don't be a stranger if you want to punt ideas around! :-)

[121Jigawatt]

Thanks! What's the best way to contact you, in that discord I'm guessing? Also what is that bottom design, it looks awesome

[jon-harper]

Thanks! What's the best way to contact you, in that discord I'm guessing?

I tend to keep the ZeroG Discord open a lot, yeah.

Also what is that bottom design, it looks awesome

That's Kraken. https://github.com/jon-harper/E34M1/tree/testing/STL/bottom It's been in testing, but is ready for release. I'm working on the docs this weekend. :-)

[121Jigawatt]

Is it the Toolhead channel or is there a dedicated EVA3 channel that I'm not seeing?

[jon-harper]

Is it the Toolhead channel or is there a dedicated EVA3 channel that I'm not seeing?

It's a little hidden. Right here: https://discord.com/channels/747612067951018075/1041406799342997544