search

jonasjuffinger / TimeLapse

A time lapse app for Sony Alpha camera using the OpenMemories framework
MIT License
155 stars 27 forks source link

timesettings: several steps between 1s and 5s #8

Closed hubertmeier closed 4 years ago

hubertmeier commented 6 years ago

This is a very usefull app, would it be possible to have some steps between 1s and 5s (1.5s, 2s, 3s, 5s). When writing RAW, 1s is too short ...

Thank you for your work

jonasjuffinger commented 6 years ago

These steps are selectable when you use one of the dials. What camera do you have?

hubertmeier commented 6 years ago

Oh, i didn't know that, i tested only the left-right buttons ... i will try it

I tested width NEX-6, A5100, and will test it with A7 series, RX1

Would it be possible to show something on the display between the frame capture like the number and / or the time of the remaining frames ?

hubertmeier commented 6 years ago

OK, i tested it

NEX-6: the slider works (1s, 5s ...), the wheels both do not work A5100: the slider and the rotating keypad (dial) on the back work both

hubertmeier commented 6 years ago

Oh, i did not want to close this issue ... sorry

jonasjuffinger commented 6 years ago

I just released a new version of the app, could you try it again?

hubertmeier commented 6 years ago

Hi, thank you for your work. I tested it on the NEX-6 (V1.0.0) again, the wheel and the dial doesn't work, only the buttons. The intervall with the buttons is 1s, 5s, 9s, 13s, sometimes start the slider at 2s, so the intervall is 2s, 6s, 10s ...

For me is the intervall 5s working because i write JPG+RAW, the camera needs some time to write. 3s or 4s would be better but i can really good live with this little limitation on the NEX-6.

The display between the frames is very usefull !!!! Thank you.