Open XRyu opened 4 years ago
Hope this helps someone :) But i dont know how to get this in here:
Analog to: https://templates.blakadder.com/gosund_SP111_v1_4.html
substitutions: device_name: gosund-sp111-v14 device_name_upper: "SmartPlug 01" # Change these to your values current_res: "0.0012" voltage_div: "771" ####################### # GOSUND SP111 ####################### # WiFi connection wifi: ssid: !secret wifi_ssid password: !secret wifi_password # reboot_timeout: 0s # ssid: "abc" # password: "12345678" ap: ssid: "${device_name}" # password: "12345678" # Enable Home Assistant API api: password: !secret api_password reboot_timeout: 36h # Enable OTA-Flashing ota: password: !secret ota_password # Enable Web server web_server: port: 80 # Enable Captive Portal captive_portal: # Text sensors with general information text_sensor: - platform: version name: ${device_name}_version # Sync time with Home Assistant time: - platform: homeassistant id: homeassistant_time esphome: name: ${device_name} platform: ESP8266 board: esp8285 sensor: - platform: hlw8012 sel_pin: number: GPIO12 inverted: True cf_pin: GPIO05 cf1_pin: GPIO14 current_resistor: ${current_res} voltage_divider: ${voltage_div} change_mode_every: 3 # initial_mode: CURRENT update_interval: 5s current: name: "Current" unit_of_measurement: A accuracy_decimals: 3 voltage: name: "Voltage" unit_of_measurement: V accuracy_decimals: 1 power: name: "Wattage" unit_of_measurement: W accuracy_decimals: 0 # filters: # - multiply: 0.5 id: "Wattage" - platform: total_daily_energy name: "Total Daily Energy" power_id: "Wattage" filters: # Multiplication factor from W to kW is 0.001 - multiply: 0.001 unit_of_measurement: kWh binary_sensor: # Binary sensor for the button press - platform: gpio name: button pin: number: GPIO13 inverted: true on_press: - switch.toggle: relay switch: # Switch to toggle the relay - platform: gpio id: relay name: relay pin: GPIO15 on_turn_on: - light.turn_on: led on_turn_off: - light.turn_off: led output: # Relay state led - platform: esp8266_pwm id: state_led pin: number: GPIO02 inverted: true light: # Relay state light - platform: monochromatic output: state_led id: led # Uses the red LED as a ESPhome status indicator status_led: pin: number: GPIO00 inverted: true
Hope this helps someone :) But i dont know how to get this in here:
Analog to: https://templates.blakadder.com/gosund_SP111_v1_4.html