Suggestions for additional functions

[harupipapaZZZ]

1) Display current mode It is difficult to see the current mode when using the system. It would be good if it could be indicated by a color change in the color LED or by the number of times the LED blinks during certain operations.

2) Use a different LED from the one attached to the button. And change to a single LED.

3)Mode change operation with a single finger Simultaneous pressing of two buttons cannot be done with one finger. Therefore, it is easier to operate if mode can be changed with a specific action.

4) The current joystick is small and very convenient to put a waterproof cap on it. Since I cannot find normal tact switches with waterproof caps on the market, Use this joystick (with waterproof cap) and use it instead of a button. The small size allows for a smaller case.

For example Joystick A (center & up/down/left/right) Joystick B (center & up/down/left/right) This allows 10 buttons to be operated.

The maximum number of buttons supported by DMD is 8, but actually there are other code assignments than F 5, F 6, and F7, so only the name should be DMD2 CTL 8K and it will work! If you do this I am available for consultation.

[harupipapaZZZ]

Additional Requests

Current Seeed Studio XIAO nRF52840 from Seeed Studio XIAO to ESP32C3

It supports Bluetooth 5 LE and WIFI and is less expensive.

[joncox123]

media (music) mode has been added as the forth mode

[harupipapaZZZ]

Confirmed thank you