search

jonnew / cyclops

Precision current source, with optional optical feedback, for driving LEDs and laser diodes
https://open-ephys.org/cyclops-led-driver/cyclops-led-driver
45 stars 22 forks source link

Power switch installation instructions #3

Closed jsiegle closed 8 years ago

jsiegle commented 8 years ago

The power switch needs to be placed through the appropriate hole in the enclosure before being soldered to the PCB. The instructions should be updated to reflect this.

jonnew commented 8 years ago

Are you looking at the Kit assembly guide or the main manual? This is mentioned in the kit assembly manual (step 2 is the switch in the panel, step 4 is solder the switch to the board. Some of the initial kits were shipped without a slip of paper directing people to the beta kit manual and that might be the problem.

I would like to combine the kit assembly manual with the main manual soon.

jsiegle commented 8 years ago

I was reading the main manual. Looks good in the kit assembly guide!

jonnew commented 8 years ago

I also now see that the main manual has a picture of the switch soldered in before being put in the panel, which is what you were saying, and is wrong. I will fix that.