Results for SMA SB2100TL

[GoogleCodeExporter]

root@hp-gerb:/home/gerbenr/sma-bluetooth# ./smatool -v -from "2011-02-20 
00:00:00" -to "2011-02-20 23:30:00"
QUERY RANGE    from 2011-02-20 00:00:00 to 2011-02-20 23:30:00
Address 00:80:25:0b:0f:28
bluetooth signal = 69%
serial=77:50:1f:9b
bluetooth signal = 69%
bluetooth signal = 69%
2011-02-21 14:51:56 Unit Serial          = 3821139 none                
2011-02-21 14:51:56 NO DATA for 1f 82 = 8001 NO UNITS
2011-02-21 14:51:56 NO DATA for 20 82 = 9022 NO UNITS
2011-02-21 14:51:56 NO DATA for 21 82 = 601 NO UNITS
2011-02-21 14:51:56 NO DATA for 21 82 = 636 NO UNITS
2011-02-21 14:51:56 Total Power          = 1383 Watts               
2011-02-21 14:51:56 Max Phase 1          = 2150 Watts               
2011-02-21 14:51:56 Max Phase 2          = 2150 Watts               
2011-02-21 14:51:56 Max Pahse 3          = 2150 Watts               
2011-02-21 14:51:56 Line Voltage Phase 1Volts = 241 Volts               
2011-02-21 14:51:56 Line Current Phase 1Amps = 6 Amps                
2011-02-21 14:51:56 Grid Frequency       = 50 Hertz               
2011-02-21 14:51:56 NO DATA for 1f 4a = 100 NO UNITS
bluetooth signal = 69%

28/4/1974 17:34:09  total=72058914471936.000 Kwh current=0 Watts togo=0 i=11 
crc=0
14/7/1970 05:20:14  total=72057589071872.000 Kwh current=-15977278341120 Watts 
togo=0 i=23 crc=0Date Error! prev=136398849 current=16777214

Can I do anything to help get my SB 2100TL supported? 

thanks for the work anyway, it seems that I at least can view my current power: 
In this case 1383 W . 

Original issue reported on code.google.com by gerb...@gmail.com on 21 Feb 2011 at 1:55

[GoogleCodeExporter]

If you get this far I only need the archive string. You could try values or do 
a sniff from SunnyExplorer. The values are in smatool.c. There are 255 values 
to try.

Original comment by stephenb...@gmail.com on 22 Feb 2011 at 4:21

• Changed state: Accepted

[GoogleCodeExporter]

also run it with the -d flag it will give more information

Original comment by stephenb...@gmail.com on 22 Feb 2011 at 4:22

[GoogleCodeExporter]

Hi,

i have two debug output from the 2100-TL
I hope this will help :-)

Original comment by rabim...@arcor.de on 6 Mar 2011 at 9:31

Attachments:

• output2100-1.txt
• output2100-2.txt

[GoogleCodeExporter]

if you can give me a sniff from sunny explorer I can get the archive string. 
Let me know if you need to know how.

Original comment by stephenb...@gmail.com on 10 Mar 2011 at 5:17

[GoogleCodeExporter]

what is the command switch for a sniff? "sunnyexplorer.exe -d" ?

Original comment by rabim...@arcor.de on 17 Mar 2011 at 3:32

[GoogleCodeExporter]

I have a very similar problem with my Sunny boy 3000TL20.

root@debian:~/sma-bluetooth# ./smatool -v
Auto set dates from 2000-01-01 00:00:00 to 2011-03-18 19:29:00
Address 00:80:25:14:F5:22
bluetooth signal = 73%
serial=7d:2f:c9:9a
bluetooth signal = 73%
bluetooth signal = 73%
bluetooth signal = 73%
serial=7d:2f:c9:9a
bluetooth signal = 73%
bluetooth signal = 73%
bluetooth signal = 73%
serial=7d:2f:c9:9a
bluetooth signal = 73%
bluetooth signal = 73%
bluetooth signal = 72%
serial=88:88:88:88
bluetooth signal = 72%
bluetooth signal = 72%
2011-03-18 19:29:16 NO DATA for 6d 23 = 8630808 NO UNITS
2011-03-18 19:29:16 NO DATA for 6d 23 = 8630808 NO UNITS
bluetooth signal = 72%
Timeout reading bluetooth socket

If you explain how to sniff with sunny explorer, I'll do it.

Original comment by buzzi.la...@gmail.com on 18 Mar 2011 at 7:38

[GoogleCodeExporter]

Up?

Original comment by buzzi.la...@gmail.com on 21 Mar 2011 at 8:39

[GoogleCodeExporter]

Sorry for the delay I'm going to add a sniff howto as this may be easier than 
explaining individually

Original comment by stephenb...@gmail.com on 22 Mar 2011 at 12:34

[GoogleCodeExporter]

Thanks Stephen. Looking forward for reading it.

Original comment by buzzi.la...@gmail.com on 22 Mar 2011 at 12:33

[GoogleCodeExporter]

Stephen,

Attached is my usbsnoop.log file

Original comment by buzzi.la...@gmail.com on 22 Apr 2011 at 6:05

Attachments:

• usbsnoop.log

[GoogleCodeExporter]

has someone a working 2100tl ?

Original comment by rabim...@arcor.de on 5 Aug 2011 at 4:46

[GoogleCodeExporter]

try this in invcode.in

Inverter        2100TL
Code1           0x0f
Code2           0x14
Code3           0x06
Code4           0x3a
InvCode         0x63

Original comment by stephenb...@gmail.com on 27 Nov 2011 at 5:02

[GoogleCodeExporter]

ok i get data into the mysql database but i can not update to pv-output.org 
with an SB5000-tl20 is's working :-/

Original comment by rabimme...@gmail.com on 25 Jan 2012 at 5:09

[GoogleCodeExporter]

Sorry for the delay can you run with smatool -d -v

Original comment by stephenb...@gmail.com on 27 Feb 2013 at 6:45