UTC to Local Time difference error

What steps will reproduce the problem?
1. Running smatool
2.
3.

What is the expected output? What do you see instead?

When running the smatool in the morning, I see that the time difference between 
UTC and local time is not calculated properly. The time difference is UTC+10 
hours (Melbourne, Australia) but it is calculated as 14 hours for some reason. 
The date/time mentioned in there is still correct. What I see is below:

pi@raspberrypi ~/bin/sma-bluetooth $ ./smatool -v -d
variable=Inverter value=3000TLHF
variable=BTAddress value=xx.xx.xx.xx.xx.xx
variable=BTTimeout value=15
variable=Password value=0000
variable=Config value=
variable=File value=sma.in.new
variable=Latitude value=-37.90
variable=Longitude value=144.72
variable=MySqlHost value=localhost
variable=MySqlDatabase value=smatool
variable=MySqlUser value=root
variable=MySqlPwd value=xxxxxxxx
variable=PVOutputURL value=http://pvoutput.org/service/r1/addstatus.jsp
variable=PVOutputKey value=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
variable=PVOutputSid value=xxxx
variable=Inverter value=1700TL
variable=Code1 value=0x12
variable=Code2 value=0x1a
variable=Code3 value=0xd9
variable=Code4 value=0x38
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=2100TL
variable=Code1 value=0x17
variable=Code2 value=0x97
variable=Code3 value=0x51
variable=Code4 value=0x38
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=SB3000
variable=Code1 value=0x64
variable=Code2 value=0xc6
variable=Code3 value=0x46
variable=Code4 value=0x3b
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=3000TL
variable=Code1 value=0x32
variable=Code2 value=0x42
variable=Code3 value=0x85
variable=Code4 value=0x38
variable=InvCode value=0x71
variable=InvCode value=
variable=Inverter value=3000TLHF
variable=Code1 value=0x1b
variable=Code2 value=0xb1
variable=Code3 value=0xa6
variable=Code4 value=0x38
variable=InvCode value=0x83
variable=InvCode value=
variable=Inverter value=4000TL
variable=Code1 value=0x78
variable=Code2 value=0x21
variable=Code3 value=0xbf
variable=Code4 value=0x3a
variable=InvCode value=0x4e
variable=InvCode value=
variable=Inverter value=5000TL
variable=Code1 value=0x3f
variable=Code2 value=0x10
variable=Code3 value=0xfb
variable=Code4 value=0x39
variable=InvCode value=0x4e
variable=InvCode value=
variable=Inverter value=7000
variable=Code1 value=0xcf
variable=Code2 value=0x84
variable=Code3 value=0x84
variable=Code4 value=0x3a
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=10000TL
variable=Code1 value=0x69
variable=Code2 value=0x45
variable=Code3 value=0x32
variable=Code4 value=0x39
variable=InvCode value=0x80
variable=InvCode value=
variable=Inverter value=XXXXTL
variable=Code1 value=0x99
variable=Code2 value=0x35
variable=Code3 value=0x40
variable=Code4 value=0x36
variable=InvCode value=0x4e
utc=2012-09-11 23:33 local=2012-09-12 09:33 diff -14 hours
localOffset=-14.000000
localOffset=10.000000 isdst=0
tzsecs=8ca1 36001
tzsecs=8c a1
Before todays Almanac
Before Check Schema
SELECT data FROM settings WHERE value='schema'
auto_set_dates
DELETE FROM DayData WHERE CurrentPower < 0 or ETotalToday = 9999999.999
SELECT DATE_FORMAT( DateTime, "%Y-%m-%d %H:%i:%S" ) FROM DayData ORDER BY 
DateTime DESC LIMIT 1
Auto set dates from 2012-09-11 16:10:00 to 2012-09-12 09:33:00
SELECT if(sunrise < NOW(),1,0) FROM Almanac WHERE date= DATE_FORMAT( NOW(), 
"%Y-%m-%d" )
Before close
pi@raspberrypi ~/bin/sma-bluetooth $

What version of the product are you using? On what operating system?

pi@raspberrypi ~/bin/sma-bluetooth $ uname -a
Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l 
GNU/Linux

SMA-Bluetooth smatool.c attached.

Please provide any additional information below.

I suspect that due to the above error, my outputs are not being sent to 
pvoutput.org during the day with my cron job or even when I run it manually in 
the morning. When I get back from work, I run it manually even after dark and 
it still pulls out the data from the inverter and sends it to pvoutput.org. I 
would like for this to work during the day as well.

Thanks in advance for any help you can provide.
Original issue reported on code.google.com by lavin...@gmail.com on 11 Sep 2012 at 11:39
Attachments:
smatool.c
jonneytest / sma-bluetooth

UTC to Local Time difference error #99
