search

joranderaaff / portalturret

The software part for the Portal Turret powered by an ESP8266 and a 3D printer.
21 stars 12 forks source link

wemos mount step/f360 file #1

Closed abrugsch closed 7 months ago

abrugsch commented 2 years ago

Thanks for the great project! Can you provide the step or F360 file for the wemos mount? I have an older D1 mini and I'd like to modify the bracket for the difference in the module that I have (has a discrete 8266 module on the carrier board)

joranderaaff commented 2 years ago

Hi! I'll get back to you soon. Was a bit busy. I'll see if I can upload the files for the WeMos for you.

On Tue, Apr 12, 2022, 23:13 Alistair @.***> wrote:

Thanks for the great project! Can you provide the step or F360 file for the wemos mount? I have an older D1 mini and I'd like to modify the bracket for the difference in the module that I have (has a discrete 8266 module on the carrier board)

— Reply to this email directly, view it on GitHub https://github.com/joranderaaff/portalturret/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAEQYBI56XVBESB3FEZ25N3VEXRQZANCNFSM5TIRV7TQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

abrugsch commented 2 years ago

Thanks! I have quite a bit of printing still to do so it's not urgent. I will of course contribute the modified version back to the project :)

joranderaaff commented 2 years ago

Hi Alistair!

I think I got a STEP file for you of the Wemos mount.. Where do you want me to send it? Maybe send your actual email address so I can send it to you?

All the best,

Joran

On Thu, 21 Apr 2022 at 18:36, Alistair @.***> wrote:

Thanks! I have quite a bit of printing still to do so it's not urgent. I will of course contribute the modified version back to the project :)

— Reply to this email directly, view it on GitHub https://github.com/joranderaaff/portalturret/issues/1#issuecomment-1105451138, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAEQYBJ5YDDZ556KI2MER2LVGF7YNANCNFSM5TIRV7TQ . You are receiving this because you commented.Message ID: @.***>

abrugsch commented 2 years ago

You could just add it to the github repo, or in the same place as the rest of the 3D files.

Otherwise my email is the name on my github account, firstname.lastname@gmail

AeroX2 commented 1 year ago

Hey I'm also really interested in getting access to the CAD files, I'm looking to make some small modifications and I would really appreciate it!

My email is james @ snoopyaustralia.com

Thanks

joranderaaff commented 1 year ago

I've added the STEP file to the repo for version 2.0 of the turret.

abrugsch commented 1 year ago

Is there much change in V2? I had to re-start my build after most of my printed parts warped in a hot car. I've already picked up the redone wings with added support, has much else changed or just code?

joranderaaff commented 1 year ago

There are a few small updates due to change in components. There's significantly less stuff to solder due to a custom PCB and the hole for the PIR sensor got updated to be a bit smaller. But in general you should be able to do most of the stuff with this version.

Ev0lve712 commented 7 months ago

Good afternoon, I’m currently assembling a turret, when will I have a chance to take a look at v2?

joranderaaff commented 7 months ago

The STEP file should be V2. Are there issues with this file for you?

Ev0lve712 commented 7 months ago

I was a little in a hurry, I have version 4 of Wemos, I can’t figure out where to solder the contacts. D8 is not on this board.

The remaining contacts also raise questions.

Wemos D1 mini v4

joranderaaff commented 7 months ago

Please refer to this page to check pin numbering: https://www.wemos.cc/en/latest/d1/d1_mini_3.1.0.html

There's two kinds: Pin and GPIO Pin. So D8 is the same as GPIO15.

Ev0lve712 commented 7 months ago

Thanks for the tip, I'll leave this here. Maybe it will be useful to someone.

v3-v4

1-5 2-4 5-14 6-12 7-13 8-15