File INP does not created

[matteomuraforestry]

Jorge,

during the training with my students, after all the required steps, we run the simulation, the log states that the file .inp have been sucessufully created but, when we go to look for it in the Temp forlde, the file is not present, only the .txt of the simulation log.

Upon 35 students, only 3 got the .inp file, and also myself I was able to create the .inp at the 3rd attempt.

Were you aware of this issue?

Thanks in advance,

Matteo

[jorgealmerio]

Matteo,

After the simulation the results are loaded into the shapefile table attributes (ifyou confirm on the "Ok" button). If you want the INP file, you can try the tool in Menu: "Plugins\QWater\Tool\Write Epanet INP file". You can find this option in the Qwater toolbar too.

Let me know if it can solve it.

Thanks,

Jorge Almerio

[matteomuraforestry]

Thanks a lot Jorge, it works perfectly.

Sincerely,

Matteo

Il giorno lun 13 mag 2024 alle ore 13:02 jorgealmerio < @.***> ha scritto:

Matteo,

After the simulation the results are loaded into the shapefile table attributes (with you confirm on the "Ok" button). If you want the INP file, you can try the tool in Menu: "Plugins\QWater\Tool\Write Epanet INP file". You can find this option in the Qwater toolbar too.

Let me know if it can solve it.

Thanks,

Jorge Almerio

— Reply to this email directly, view it on GitHub https://github.com/jorgealmerio/QWater/issues/18#issuecomment-2107276889, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEEYLDW4OMXDHZ56KSZIOX3ZCCMTTAVCNFSM6AAAAABHTTBBCSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBXGI3TMOBYHE . You are receiving this because you authored the thread.Message ID: @.***>

-- Matteo Mura Research Fellow University of Florence Department of Civil and Environmental Engineering (DICEA) Via di Santa Marta 3, 50139 Firenze, Italy Email: @.***

[jorgealmerio]

Ok!