jorgehalba / nintendon-t

Automatically exported from code.google.com/p/nintendon-t
0 stars 0 forks source link

Nintendont doesn't work with CFG Loader #168

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1.load CFG Loader
2.select Gamecube game
3.

What is the expected output? What do you see instead?
Game should run like it does when I select it straight from Nintendont w/o the 
use of CFG Loader. But instead it just freezes at the Nintendont screen with no 
errors or anything.

What revision of Nintendont are you using? On what system Wii/Wii U?
newest revision downloaded yesterday. On Wii

Please provide any additional information below.
Originally when trying to load the game from CFG Loader using Nintendont, I got 
an error "failure to access nand". I updated cios58 since that is where it 
showed it was using to access the boot.dol file. Now it just freezes at the 
Nintendont screen without any errors. I have been searching all over the 
internet for an updated tutorial or someone who has answered this problem, but 
I cant find anything. I uploaded CFG Loader 70r78, nDios Mios 2.11, newest 
cios58, newest Nintendont... nothing changes, same problem - will only work if 
I use Nintendont straight from its own forwarder on Homebrew. I just need a 
detailed, "clean slate" tutorial on how to get this to run on CFG Loader using 
a usb hard drive.

Original issue reported on code.google.com by dogrocke...@gmail.com on 23 Feb 2015 at 4:09

GoogleCodeExporter commented 8 years ago
What drive is nintendont on?
what drive is cfg on?
What drive are the iso on?

Original comment by Howard_M...@yahoo.com on 23 Feb 2015 at 5:03

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
I have a similar issue, except:
I had no original issues trying to load, everything loads fine using the 
following from homebrew channel/nintendont:
My nintendont .dol (latest as of today r325) is on sd/apps
My cfg loader .dol (latest as of today v70r78) is on sd/apps
Actual cfg loader files are on usb(0)/usb-loader
iso is on usb(0)/games 
- but when trying load from cfg loader with the same setup, it states it is 
loading nintendont .dol, gets about '......' into it and freezes. Still on cfg 
loader screen, never gets to nintendont screen. I have to reset system by 
holding power for five seconds.

Original comment by politica...@gmail.com on 23 Mar 2015 at 11:08

GoogleCodeExporter commented 8 years ago
The exact output I am getting is:
[+] Booting game, please wait...

    Loading../apps/nintendont/boot.dol
    IOS(58) .....

Then it freezes.
Some things to note;
1) this hdd freezes also when using dios mios trying to load NGC games, but 
loads wii games fine, it seems like it stops working after it starts to load, 
the activity light stops...
2) this same hdd runs the same ngc games fine from homebrewchannel/nintendont...
3) I have another hdd drive (sata with usb 2.0 adapter card) that will run the 
mios dios ngc games from cfg loader, where the other hdd would not - but it 
will not run the same ngc games from nintendont from the cfg loader, but does 
from homebrewchannel/nintendont.
Hope that is helpful...

Original comment by politica...@gmail.com on 23 Mar 2015 at 11:24

GoogleCodeExporter commented 8 years ago
I feel like an idiot... The 'LOCK' on my SD card was activated, so I am 
guessing it tried to write some config info to the SD, but could not, and froze 
up; unlocking the SD card has resolved the issue... Feel free to delete my 
comments or leave them up to help other fellow idiots... Thanks for your work.

Original comment by politica...@gmail.com on 24 Mar 2015 at 1:40