DaneEvans
commented
2 years ago Yeah, those will work to get access to the I2C lines.
I'd go off the through holes where the Arduino mounts, you have less chance of overheating the copper and having the pads peel up.
If you decide not to run the OLED, you could go off the 2.54 header there, but you need to get it around the right way. You could also do it and keep the OLED, but it may be more ugly
On Tue, 16 Aug 2022, 5:13 am Silviu, @.***> wrote:
Kind of issue? HELP!
Which Board? Basic
Which Board Revision? 2.0
What steps have you taken
- I have searched the Issues page
- I have read the documentation (I don't know how to read the pcbs and even if I found the exact information I'd check with you)
What is the issue? I want to add a Pimoroni Trackball Breakout to my Sofle V2. I've found instructions for how to do it on a sofle 1.1 and 2.1 here https://github.com/foureight84/sofle-keyboard-pimoroni.
According to those docs, I need to solder the Pimoroni to these contacts: [image: image] https://user-images.githubusercontent.com/17046245/184699890-bfc177f3-b17a-4b68-a644-33467b8b122f.png
However, on the Sofle V2 they've been moved. Are these contacts from the Sofle V2 the same thing? Can I solder the Pimoroni to these? Please excuse the scuffed screenshots, I ripped them out of a reddit post. [image: image] https://user-images.githubusercontent.com/17046245/184700545-b0324ea2-03d9-4ac7-87cc-4e257a053c60.png
[image: image] https://user-images.githubusercontent.com/17046245/184701010-e1f28a66-76e2-4629-9636-1d0763ccbfa6.png
What you expected: N/A, this is some custom stuff and the keyboard is awesome anyway
— Reply to this email directly, view it on GitHub https://github.com/josefadamcik/SofleKeyboard/issues/161, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFIRN4NE5NJLIMYQVEDYPU3VZKJFPANCNFSM56TGD6HA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Moghul
etrnal70
Kind of issue? HELP!
Which Board? Basic
Which Board Revision? 2.0
What steps have you taken
What is the issue? I want to add a Pimoroni Trackball Breakout to my Sofle V2. I've found instructions for how to do it on a sofle 1.1 and 2.1 here.
According to those docs, I need to solder the Pimoroni to these contacts:
However, on the Sofle V2 they've been moved. Are these contacts from the Sofle V2 the same thing? Can I solder the Pimoroni to these? Please excuse the scuffed screenshots, I ripped them out of a reddit post.
What you expected: N/A, this is some custom stuff and the keyboard is awesome anyway