Cannot export *grd files for further drawing by sufer

[qyangxiong]

In View.exe, run option 9 and find that the *.grd file cannot be generated.See in the source code that the relevant command has been written, may not be called, resulting in the user is not asked to enter the file name, unable to generate the corresponding file.

[josefern]

have you written the option (see left botton corner of the screen)? [image: image.png] Jose Fernandez Research Professor Editor Scientific Reports Editor Remote Sensing Editor Pure and Applied Geophysics

Instituto de Geociencias (IGEO) CSIC-UCM Calle del Doctor Severo Ochoa, 7 Facultad de Medicina (Edificio Entrepabellones 7 y 8, 4ª planta) Ciudad Universitaria. 28040-Madrid Tel.: 34-913944632

El vie., 7 ago. 2020 a las 14:59, qyangxiong (notifications@github.com) escribió:

In View.exe, run option 9 and find that the *.grd file cannot be generated.See in the source code that the relevant command has been written, may not be called, resulting in the user is not asked to enter the file name, unable to generate the corresponding file.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/josefern/GROWTH_3.0_software/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGOACWBFICWFAP7BVEAK3OTR7P3ETANCNFSM4PXTMODQ .

[qyangxiong]

I have entered the corresponding option and z value, and I am not prompted for the filename of *.grd, and I do not output the corresponding file after the run is completed.I can output this file by following the corresponding steps in Growth 2.0

[qyangxiong]

After loading the data file, run option 9 and be asked if interpolation is needed: enter 1. Next, be asked if background stratification is needed: enter 1 or 0, then select the corresponding profile options: 1,2,3 and 4. Enter z,x,y values and the profile will be displayed without prompting to set the output *.grd file.

[josefern]

We have revised the code, and this new version of the View program (sent to C&G, and under review) is simpler than the previously published one. It does not include any option to generate * .grd files. Option 9 allows you to view profiles of the adjusted density model. Best regards.

Jose Fernandez Research Professor Editor Scientific Reports Editor Remote Sensing Editor Pure and Applied Geophysics

Instituto de Geociencias (IGEO) CSIC-UCM Calle del Doctor Severo Ochoa, 7 Facultad de Medicina (Edificio Entrepabellones 7 y 8, 4ª planta) Ciudad Universitaria. 28040-Madrid Tel.: 34-913944632

El vie., 7 ago. 2020 a las 15:39, qyangxiong (notifications@github.com) escribió:

After loading the data file, run option 9 and be asked if interpolation is needed: enter 1. Next, be asked if background stratification is needed: enter 1 or 0, then select the corresponding profile options: 1,2,3 and 4. Enter z,x,y values and the profile will be displayed without prompting to set the output *.grd file.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/josefern/GROWTH_3.0_software/issues/1#issuecomment-670521817, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGOACWGDL4CQZZ5NJMSXEPDR7P72XANCNFSM4PXTMODQ .

[josefern]

Anyway, if it is considered interesting we can include again in a future version of the code.

Jose Fernandez Research Professor Editor Scientific Reports Editor Remote Sensing Editor Pure and Applied Geophysics

Instituto de Geociencias (IGEO) CSIC-UCM Calle del Doctor Severo Ochoa, 7 Facultad de Medicina (Edificio Entrepabellones 7 y 8, 4ª planta) Ciudad Universitaria. 28040-Madrid Tel.: 34-913944632

El vie., 7 ago. 2020 a las 15:56, JOSE FERNANDEZ TORRES (jft@mat.ucm.es) escribió:

We have revised the code, and this new version of the View program (sent to C&G, and under review) is simpler than the previously published one. It does not include any option to generate * .grd files. Option 9 allows you to view profiles of the adjusted density model. Best regards.

Jose Fernandez Research Professor Editor Scientific Reports Editor Remote Sensing Editor Pure and Applied Geophysics

Instituto de Geociencias (IGEO) CSIC-UCM Calle del Doctor Severo Ochoa, 7 Facultad de Medicina (Edificio Entrepabellones 7 y 8, 4ª planta) Ciudad Universitaria. 28040-Madrid Tel.: 34-913944632

El vie., 7 ago. 2020 a las 15:39, qyangxiong (notifications@github.com) escribió:

After loading the data file, run option 9 and be asked if interpolation is needed: enter 1. Next, be asked if background stratification is needed: enter 1 or 0, then select the corresponding profile options: 1,2,3 and 4. Enter z,x,y values and the profile will be displayed without prompting to set the output *.grd file.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/josefern/GROWTH_3.0_software/issues/1#issuecomment-670521817, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGOACWGDL4CQZZ5NJMSXEPDR7P72XANCNFSM4PXTMODQ .

[qyangxiong]

Where can I get the code that you've changed Best regards.

[josefern]

Unfortunately the previous version does not work in Windows 10. This is the reason because we did this new release. We will consider it for the future. Best regards and thank you for your comments.

Jose Fernandez Research Professor Editor Scientific Reports Editor Remote Sensing Editor Pure and Applied Geophysics

Instituto de Geociencias (IGEO) CSIC-UCM Calle del Doctor Severo Ochoa, 7 Facultad de Medicina (Edificio Entrepabellones 7 y 8, 4ª planta) Ciudad Universitaria. 28040-Madrid Tel.: 34-913944632

El vie., 7 ago. 2020 a las 16:19, qyangxiong (notifications@github.com) escribió:

Where can I get the code that you've changed Best regards.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/josefern/GROWTH_3.0_software/issues/1#issuecomment-670540491, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGOACWAXQUST7FW3GML5GOLR7QENPANCNFSM4PXTMODQ .