Open butayama opened 4 years ago
edit: This is wrong.
Your error
XINPUT:
ERROR running the following comand:
xinput list --short | grep "Tablet Monitor Pen"
might be suggesting that your pen isn't called Tablet Monitor Pen
. If this is the case, here's a workaround.
Run xinput list --short
and under the Virtual Pointers. Do you see your pen? If you find it, edit huion-tablet-driver.py
and replace all instances of Tablet Monitor Pen
with the name of your pen.
uwes@hpi5:~$ xinput list --short | grep "Tablet Monitor Pen"
uwes@hpi5:~$ xinput list --short
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ xwayland-pointer:16 id=6 [slave pointer (2)]
⎜ ↳ xwayland-relative-pointer:16 id=7 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ xwayland-keyboard:16 id=8 [slave keyboard (3)]
uwes@hpi5:~$
Which could be the name of my pen?
Closed issue by accident
Sorry, I was looking at this late at night... What I said makes no sense, because it wouldn't throw an error on grep
. I'm not sure why xinput
is causing an error.
That line of code runs under debug mode, though, so it's nonessential. You could comment out
cmd='xinput list --short | grep "%s"' % XINPUT_DEVICE_KEYWORD
try:
sp.run(cmd, shell=True, check=True)
except sp.CalledProcessError as e:
run_error(e, cmd)
or completely disable debug with debug_mode=false
in config.ini
to see if the driver works otherwise.
After commenting out the lines as recommended, the tablet buttons seemd to be responsive. Button 11 and 10 were OK, After pressing button 9 an error with the command ctrl+shift+F12 occured. The tablet did not answer to movements of the pen. After plugging and reconnecting the tablet, the pen is reactive and seems to work. The buttons showed some unexpected behavior after testing the bookmark functions of PyCharm. Instead of ctrl+shift+2 ctrl+shift+F2 was executed. I will try a simple button assignment with numbers and will post the results later.
(venv) uwes@hpi5:/mnt/Volume/GitHub/huion-linux-drivers$ sudo ./huion-tablet-driver.py
[sudo] password for uwes:
Finding USB device. . . Done!
grabbed interface %d 0
grabbed interface %d 1
grabbed interface %d 2
Reading configuration. . . Done!
Setting up driver. . . Done!
Tablet model name 1060 PLUS
Buttons ENABLED (12)
Scrollbar disabled (0)
Notifications: ENABLED
for buttons ENABLED
for scrollbar disabled
Screen disabled
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
< DEBUG MODE ENABLED >
Enabled by default. You can disable it by setting debug_mode = false
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SYSTEM: Linux 4.19.0-8-amd64 (x86_64 )
#1 SMP Debian 4.19.98-1 (2020-01-26)
DEVICE: /dev/input/event18 (py-evdev-uinput)
bus: 0003, vendor 0001, product 0001, version 0003
ENDPOINT 0x81: Interrupt IN ==========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x81 IN
bmAttributes : 0x3 Interrupt
wMaxPacketSize : 0x10 (16 bytes)
bInterval : 0x2
TABLET CAPABILITIES:
[('SYN_REPORT', 0), ('SYN_CONFIG', 1), ('SYN_DROPPED', 3), ('?', 21)]
[(['BTN_DIGI', 'BTN_TOOL_PEN'], 320), ('BTN_TOUCH', 330), ('BTN_STYLUS', 331), ('BTN_STYLUS2', 332)]
[(('ABS_X', 0), AbsInfo(value=0, min=0, max=50800, fuzz=0, flat=0, resolution=0)), (('ABS_Y', 1), AbsInfo(value=0, min=0, max=31750, fuzz=0, flat=0, resolution=0)), (('ABS_PRESSURE', 24), AbsInfo(value=0, min=0, max=8191, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_X', 26), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_Y', 27), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0))]
VPEN:
name "Tablet Monitor Pen 183943", bus "BUS_USB", vendor "0001", product "0001", version "0003", phys "py-evdev-uinput"
event types: EV_SYN EV_KEY EV_ABS
XINPUT:
Huion Kamvas driver should now be running. . .
(Input from the tablet will be printed out)
[menu_pycharm_10b]
button 0 = key shift+F11 # Show bookmarks
button 1 = key ctrl+shift+1 # test button with bookmark
button 2 = key ctrl+shift+2 # test button with bookmark
button 3 = key ctrl+shift+3 # test button with bookmark
button 4 = key ctrl+shift+4 # test button with bookmark
button 5 = key ctrl+shift+7 # test button with bookmark
button 6 = key ctrl+shift+8 # test button with bookmark
button 7 = key ctrl+shift+9 # test button with bookmark
button 8 = key ctrl+alt+s # Settings
button 9 = key ctrl+shift+F12 # toggle maximize Editoturn right (krita)
button 10 =
button 11 =
07 e0 01 01 00 08 00 00
07 e0 01 01 00 00 00 00
07 e0 01 01 00 04 00 00
07 e0 01 01 00 00 00 00
07 e0 01 01 00 02 00 00
No protocol specified
Error: Can't open display: (null)
Failed creating new xdo instance
ERROR running the following comand:
xdotool key ctrl+shift+F12 # toggle maximize Editoturn right (krita)
RETURN CODE: 1
The results of test with another button assignment are posted below. The pen responded only after unplug - plug the tablet.
(venv) uwes@hpi5:/mnt/Volume/GitHub/huion-linux-drivers$ sudo ./huion-tablet-driver.py
Finding USB device. . . Done!
grabbed interface %d 0
grabbed interface %d 1
grabbed interface %d 2
Reading configuration. . . Done!
Setting up driver. . . Done!
Tablet model name 1060 PLUS
Buttons ENABLED (12)
Scrollbar disabled (0)
Notifications: ENABLED
for buttons ENABLED
for scrollbar disabled
Screen disabled
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
< DEBUG MODE ENABLED >
Enabled by default. You can disable it by setting debug_mode = false
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SYSTEM: Linux 4.19.0-8-amd64 (x86_64 )
#1 SMP Debian 4.19.98-1 (2020-01-26)
DEVICE: /dev/input/event18 (py-evdev-uinput)
bus: 0003, vendor 0001, product 0001, version 0003
ENDPOINT 0x81: Interrupt IN ==========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x81 IN
bmAttributes : 0x3 Interrupt
wMaxPacketSize : 0x10 (16 bytes)
bInterval : 0x2
TABLET CAPABILITIES:
[('SYN_REPORT', 0), ('SYN_CONFIG', 1), ('SYN_DROPPED', 3), ('?', 21)]
[(['BTN_DIGI', 'BTN_TOOL_PEN'], 320), ('BTN_TOUCH', 330), ('BTN_STYLUS', 331), ('BTN_STYLUS2', 332)]
[(('ABS_X', 0), AbsInfo(value=0, min=0, max=50800, fuzz=0, flat=0, resolution=0)), (('ABS_Y', 1), AbsInfo(value=0, min=0, max=31750, fuzz=0, flat=0, resolution=0)), (('ABS_PRESSURE', 24), AbsInfo(value=0, min=0, max=8191, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_X', 26), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_Y', 27), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0))]
VPEN:
name "Tablet Monitor Pen 194326", bus "BUS_USB", vendor "0001", product "0001", version "0003", phys "py-evdev-uinput"
event types: EV_SYN EV_KEY EV_ABS
XINPUT:
Huion Kamvas driver should now be running. . .
(Input from the tablet will be printed out)
[menu_pycharm_12]
button 0 = key 0 # Show bookmarks
button 1 = key 1 # test button with bookmark
button 2 = key 2 # test button with bookmark
button 3 = key 3 # test button with bookmark
button 4 = key 4 # test button with bookmark
button 5 = key 5 # test button with bookmark
button 6 = key 6 # test button with bookmark
button 7 = key 7 # test button with bookmark
button 8 = key 8 # Settings
button 9 = key 9 # toggle maximize Editoturn right (krita)
button 10 = key 0
button 11 = key 1
...
07 e0 01 01 01 00 00 00
No protocol specified
Error: Can't open display: (null)
Failed creating new xdo instance
ERROR running the following comand:
xdotool key 0 # Show bookmarks
RETURN CODE: 1
(venv) uwes@hpi5:/mnt/Volume/GitHub/huion-linux-drivers$ sudo ./huion-tablet-driver.py
Finding USB device. . . Done!
Reading configuration. . . Done!
Setting up driver. . . Done!
Tablet model name 1060 PLUS
Buttons ENABLED (12)
Scrollbar disabled (0)
Notifications: ENABLED
for buttons ENABLED
for scrollbar disabled
Screen disabled
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
< DEBUG MODE ENABLED >
Enabled by default. You can disable it by setting debug_mode = false
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SYSTEM: Linux 4.19.0-8-amd64 (x86_64 )
#1 SMP Debian 4.19.98-1 (2020-01-26)
DEVICE: /dev/input/event18 (py-evdev-uinput)
bus: 0003, vendor 0001, product 0001, version 0003
ENDPOINT 0x81: Interrupt IN ==========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x81 IN
bmAttributes : 0x3 Interrupt
wMaxPacketSize : 0x10 (16 bytes)
bInterval : 0x2
TABLET CAPABILITIES:
[('SYN_REPORT', 0), ('SYN_CONFIG', 1), ('SYN_DROPPED', 3), ('?', 21)]
[(['BTN_DIGI', 'BTN_TOOL_PEN'], 320), ('BTN_TOUCH', 330), ('BTN_STYLUS', 331), ('BTN_STYLUS2', 332)]
[(('ABS_X', 0), AbsInfo(value=0, min=0, max=50800, fuzz=0, flat=0, resolution=0)), (('ABS_Y', 1), AbsInfo(value=0, min=0, max=31750, fuzz=0, flat=0, resolution=0)), (('ABS_PRESSURE', 24), AbsInfo(value=0, min=0, max=8191, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_X', 26), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0)), (('ABS_TILT_Y', 27), AbsInfo(value=0, min=0, max=255, fuzz=0, flat=0, resolution=0))]
VPEN:
name "Tablet Monitor Pen 194423", bus "BUS_USB", vendor "0001", product "0001", version "0003", phys "py-evdev-uinput"
event types: EV_SYN EV_KEY EV_ABS
XINPUT:
Huion Kamvas driver should now be running. . .
(Input from the tablet will be printed out)
[menu_pycharm_12]
button 0 = key 0 # Show bookmarks
button 1 = key 1 # test button with bookmark
button 2 = key 2 # test button with bookmark
button 3 = key 3 # test button with bookmark
button 4 = key 4 # test button with bookmark
button 5 = key 5 # test button with bookmark
button 6 = key 6 # test button with bookmark
button 7 = key 7 # test button with bookmark
button 8 = key 8 # Settings
button 9 = key 9 # toggle maximize Editoturn right (krita)
button 10 = key 0
button 11 = key 1
07 e0 01 01 00 00 00 00
07 e0 01 01 02 00 00 00
No protocol specified
Error: Can't open display: (null)
Failed creating new xdo instance
ERROR running the following comand:
xdotool key 1 # test button with bookmark
RETURN CODE: 1
⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ HUION Huion Tablet Pen id=23 [slave keyboard (3)]
I have this tablet.. It's called Huion HS610. I see this as output when I use the xinput command. However, when I run the python script, the item vanishes and the xinput command fails.
after following the recommended Usage steps I get an XINPUT Error: reboot and reinstall xinput didn' change the output.
error_huion_1060PLUS.log
config_ini.txt
uclogic-probe.log