Open philipdroberts opened 1 year ago
github-actions[bot]
commented
1 year ago Hello there philipdroberts 👋
Welcome to TallyArbiter!
Thank you for opening your first issue for the Tally Arbiter project. Tally Arbiter fosters an open and welcoming environment for all our contributors. Please adhere to our Code Of Conduct.
If you have more to contribute to this issue, please comment down below! We will try to get back to you as soon as we can.
josephdadams
commented
1 year ago Is it only over serial?
philipdroberts
commented
1 year ago Yes, only serial. Its RS422 but I'm currently using a RS422 to RS232 converter and running it into a PLC
On Thu, Jul 27, 2023 at 8:37 PM Joseph Adams @.***> wrote:
Is it only over serial?
— Reply to this email directly, view it on GitHub https://github.com/josephdadams/TallyArbiter/issues/580#issuecomment-1654805186, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOED5DS442X6SLM7F3OESGDXSMCUVANCNFSM6AAAAAA2ZER3GM . You are receiving this because you authored the thread.Message ID: @.***>
What feature would you like to see added to TallyArbiter?
Have you considered adding support for Ross Vision Tallies?
The Vision uses a protocol derived from the Grass Valley Kalypso protocol over RS422. https://wwwapps.grassvalley.com/docs/Manuals/switchers/kalypso/071-8063-08.pdf
The differences are limited the input and output source numbering and I do have that documented also.
Thanks
Philip