search

joshajohnson / sea-picro

Sea-Picro is a RP2040 based board in the Arduino Pro Micro form factor.
Other
154 stars 16 forks source link

v.03 test #10

Closed freznel10 closed 2 years ago

freznel10 commented 2 years ago

Hi Josh, has v.3 been tested already? Sorry, I could not find the conversations tab hence I placed my question here.

joshajohnson commented 2 years ago

Hey Freznel, it''s partially tested.

I've checked all the IO work, but need to check VBUS detection, RGB LED, check a few voltages, and a few other things. If you can hold off for 48 hours I'll have finished testing and update here with (hopefully) good news.

freznel10 commented 2 years ago

Thank you!

On Tue, Jul 26, 2022 at 6:39 PM Josh Johnson @.***> wrote:

Hey Freznel, it''s partially tested.

I've checked all the IO work, but need to check VBUS detection, RGB LED, check a few voltages, and a few other things. If you can hold off for 48 hours I'll have finished testing and update here with (hopefully) good news.

— Reply to this email directly, view it on GitHub https://github.com/joshajohnson/sea-picro/issues/10#issuecomment-1195314560, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUD55PZN5TIVTPK5VUGQU4TVV657ZANCNFSM54SW7BVQ . You are receiving this because you authored the thread.Message ID: @.***>

joshajohnson commented 2 years ago

Hi @freznel10,

I assembled a few more boards and tested them, have found two more issues documented in https://github.com/joshajohnson/sea-picro/issues/11. Otherwise everything is working as planned.

Will hopefully resolve by this time tomorrow assuming all goes well.

joshajohnson commented 2 years ago

All tested now @freznel10!

I'm ordering a bunch of the 1.0 boards now, so fingers crossed there are no more bugs!

freznel10 commented 2 years ago

Nice to hear that!:) Hope everything turns out fine for the 1 boards!